BenQ PointWrite Manuel utilisateur
PointWrite User Manual
Table of contents2
Ta b l e o f c o n t e n t s
Shipping Contents........ 3
Attaching the
PointWrite to the
Projector....................... 4
Connecting the
PointWrite to PC......... 5
Pen Action .................... 5
Exchanging the Pen Tip............................5
Driver Installation........ 6
Configuration Setting .. 8
The PointWrite Configuration ..............8
Alignment View .........................................9
PointWrite Calibration..........................10
Running the
PointWrite.................. 12
Specifications.............. 13
Trouble Shooting ....... 14
3
Shipping Contents
The PointWrite is a built in Interactive Whiteboard on the projector. To use the
PointWrite correctly, please find the standard accessories below and follow the
instructions in this manual.
1. PointWrite: Interactive Whiteboard Sensor.
2. Installation CD: CD contains PointWrite driver, QWrite software and user manual.
3. Quick Start Guide: Short cut of how to use the PointWrite.
4. Two PointWrite Pens: PointWrite Pen is a pen type wireless mouse. Before using the
pen, insert the batteries into the pen.
5. Mini USB Cable: Connects the PointWrite to PC.
6. Batteries: AAA size batteries.
7. Extra Pen Tip: 5 extra pen tips for each pen.
8. Wrist strip
Caution: When inserting the batteries into the PointWrite Pen, make sure the battery
polarities are correct.
123
PointWrite Installation CD Quick manual
456
Two PointWrite pens Mini USB cable Two sets of batteries
78
Extra pen tips Wrist strip
Digital Projector
Quick Start Guide
Attaching the PointWrite to the Projector4
Attaching the PointWrite to the Projector
Attach the PointWrite to the projector as illustrated and tighten the screw to secure the
PointWrite.
1. Remove the cover on the projector as illustrated.
2. Connect the cable to the PointWrite and install the PointWriter as illustrated.
3. Tighten the screw to secure the PointWrite.
Connecting the PointWrite to PC 5
Connecting the PointWrite to PC
Use the USB cable1to connect the PointWrite to PC. Plug the USB mini-B end into the
projector and plug the USB type-A end into PC.
Pen Action
The PointWrite Pen provides the following 4 actions:
Click: Touch an icon or a menu on the screen.
Double Click: Touch an icon or a menu on the screen two times.
Right Button Click: Touch an icon or menu for at least 1.5 seconds.
Drag: Touch and drag an object on the screen.
Exchanging the Pen Tip
1. Removing the pen tip
Hold the pen tip with your fingers. Shake and pull the pen tip out of the pen.
2. Inserting the pen tip
Push the pen tip gently, but not abruptly.
1. A USB cable of 5 meters is provided. Use a USB repeater cable If you need to extend
the length.
Driver Installation6
Driver Installation
Insert the PointWrite CD into your CD/DVD-ROM driver. The Installation assistant will
run automatically. Follow the instructions on the screen. If the assistant does not run
automatically, double click on the “setup.exe” under CD/DVD-ROM directory and the
Installation assistant will display.
1. Click Install PointWrite in the installation assistant.
2. Select a language and click “OK”.
3. The installation dialog box will appear. Click next. During the installation process, it is
recommended to close other applications.
Driver Installation 7
4. Click Install, the installation begins.
5. The installation ends and a dialog box will appear. Click “Finish.
After the installation is finished,
• The PointWrite icon will be created on the desktop.
• The installation folder will be created on C: directory.
• When running the PointWrite2, the PointWrite icon appears on the system tray area.
• Click on the PointWrite icon on system tray area and a popup menu will appear.
2. When using the PointWrite for the first time, the configuration window will appear on
the desktop to help you configure the PointWrite.
Configuration Setting8
Configuration Setting
The PointWrite Configuration
To use the PointWrite, the proper setting of the PointWrite configuration is needed. The
Configuration setting window will help you to set up PointWrite correctly.
1. PointWrite configuration: Select the PointWrite type you’re going to use.
2. PointWrite Language: The default language is the same as the language for your
operating system. If you want to change the language, click on and
then language list will display. After selecting your preferred language, quit the
PointWrite and start the PointWrite again.
3. PointWrite Option:
•Start Program Registration: Click this item if you want the PointWrite to
run automatically when Windows starts.
•Ceiling Mount Mode: Click this item if you mount the projector on the
ceiling. When the projector is placed on the table, do not click this item.
•Rear Screen Mode: If the projector is installed on the rear screen system,
click this item.
4. Select Update Server: Please visit local BenQ Website for more support.
1
2
3
4
Configuration Setting 9
Alignment View
The PointWrite Alignment function is to set the orientation of the PointWrite to the
screen.
Alignment View: When clicking on the “Alignment View”, the screen image is displayed
on the alignment view as illustrated.
If the screen image is not in the center, the calibration will fail. Please make sure the
PointWrite module is attached to the projector properly.
Configuration Setting10
PointWrite Calibration
PointWrite provides two kinds of calibration methods: auto calibration and manual
calibration.
Auto calibration3: click on and the calibration process will run automatically.
When you choose this method, white image is shown on the screen and the pattern image
is displayed.
3. Due to excessive ambient light, auto calibration may fail or the accuracy level may drop.
In this case, please execute the manual calibration.
Autres manuels pour PointWrite
3
Table des matières
Autres manuels BenQ Accessoires pour projecteur
BenQ
BenQ RS232 Commands Manuel utilisateur
BenQ
BenQ LX710 Manuel utilisateur
BenQ
BenQ InstaShow X Manuel utilisateur
BenQ
BenQ 0.4 Wall Mount-WM04G3 Manuel utilisateur
BenQ
BenQ WM04G4 Manuel utilisateur
BenQ
BenQ InstaShow WDC10T Manuel utilisateur
BenQ
BenQ PointWrite PT20 Manuel utilisateur
BenQ
BenQ WDC20C Manuel utilisateur
BenQ
BenQ InstaShow S Manuel utilisateur
BenQ
BenQ InstaShow WDC10TC Manuel utilisateur
BenQ
BenQ PointWrite Manuel utilisateur
BenQ
BenQ InstaShow VS10 Manuel utilisateur
BenQ
BenQ LH856UST Manuel utilisateur
BenQ
BenQ PT01 Manuel utilisateur
BenQ
BenQ Ceiling Mount-CM00G2 Manuel utilisateur
BenQ
BenQ WDC10 InstaShow Guide de référence rapide
BenQ
BenQ InstaShow VS20 Manuel utilisateur
BenQ
BenQ 0.3 Wall Mount Manuel utilisateur
BenQ
BenQ PointWrite PW31U Manuel utilisateur
BenQ
BenQ ScreenBar Manuel utilisateur
