Note: The feature “SMS to Email” only works on UR5i-V2L hardware platform
(ER75i-V2B platform is not supported).
The feature “SMS to Email” only works, in case of deactivated feature
"Services"->"SMS"->"Enable remote control via SMS".
SMS-Error email: Email address, where the information about failure in SMS sending will
be sent to. The e-2-s gateway will try 3 times to send the SMS. If the
third try also fails, e-2-s gateway will send an email to the predefined
Email address (defined in the field “SMS-Error email”). Leave the field
empty to deactivate the feature.
Note: If the used SMS-receive-telephone-number is wrong, the e-2-s
gateway is not able to detect this situation and so there will no SMS-
Error-email be sent. The e-2-s gateway is only able to detect problems
in the communication with the telco-provider!
Log destination email: Email address, where the history log files should be sent to.
The history-log-file will be created automatically and it stores every
SMS-activity which will be done by the e-2-s gateway.
The file will be sent automatically, if it reaches 60 kilobytes in size.
The file will reside in the gateway (/var/data/email2sms/history.log) until
it reaches the file size limit –then it will be sent to the given email
address. Leave the field empty to deactivate the feature (in this case,
the log file resides on the e-2-s gateways file system and will get reset
when the file reaches 60 kilobytes in size).
SMTP Configuration: To be able to send out emails, you need to configure a SMTP-Server.
By using the link “Configure Email SMTP Server” you will be redirected
to the page for entering the SMTP-Server information.
