Belkin WeMo F7C027 Manuel utilisateur

USER GUIDE

Wemo® Wi-Fi Smart Light Switch, F7C030

light indicators

The Wemo® Wi-Fi Smart Light Switch, F7C030 has several indicator lights that indicate the

device's state. Below is a list of the light behaviors and the corresponding activity they represent.

Indicator

Light

Icon

Indicator

Activity

Power

indicator

The Wemo Light Switch is ON.

OFF

The Wemo Light Switch is OFF.

Night time

backlight

The Wemo Light Switch is ON.

Wi-Fi

indicator

Green and

blinking

The Wemo Light Switch is starting up,

connecting or undergoing firmware

update.

Green and solid

then turns OFF

The Wemo Light Switch has

established a stable connection.

Orange and

blinking

The Wemo Light Switch is not

connected to the Wi-Fi.

NOTE: The Wi-Fi indicator light is only visible during setup.

Meet the Wemo® Wi-Fi Smart Light Switch,

F7C030

The Wemo® Wi-Fi Smart Light Switch,F7C030 is an alternative for your simple wall light switch that

allows you to view the status and control the light anywhere in your home.

Key Features

The Wemo Light Switch connects to your Wi-Fi, allowing your device to connect to it

through the Wemo App. It can connect seamlessly over Wi-Fi, 3G or 4G.

You can easily set the turn ON or OFF times manually or enter your city name and have

lights to turn ON at sunrise then OFF at sunset.

The Wemo Light Switch comes with an elegant clip-on face plate that hides all screws

giving it a modern look and it has a back light to make it easy to find at night.

Compatible with any smartphone or tablet running Android™ 4.4 or higher or iOS 9 or

higher.

HardwareFeatures

A. Wi-Fi Indicator - This indicator changes alternatively in color between green and orange and is

only visible during setup.

B. Power Indicator - This indicator lights up if the Wemo Light Switch is ON.

C. Night Light - This indicator lights up only when the room is dark that makes the Wemo Light

Switch easy to find.

D. Reset Button - This is also known as the Wi-Fi Reset button that is dedicated for resetting the Wi-

Fi settings of your Wemo Light Switch. This is located right below the Night Light beside the Power

Restart button.

E. Restart Button - This is alsoknown as the Power Restart button that is dedicated to power restart

your Wemo Light Switch without losing any Wi-Fi settings. This is located right below the Night Light

beside the Wi-Fi Reset button.

F. Clip-on Face Plate - This hides all screws, giving a modern look to the Wemo Light Switch.

NOTE: The MAC address of the Wemo Light Switch can be found underneath if you remove the face

plate.

G. Easy ON / OFF - Push anywhere to toggle ON and OFF.

Resetting or restarting your Wemo® Wi-Fi Smart Light Switch,F7C030 is easy with its

dedicated Reset and Restart buttons.

Restart if:

The Wemo Light Switch is not detected by the Wemo App.

The Wemo Light Switch is blinking orange after a firmware update.

The Wemo Light Switch has become unresponsive to both the app and manual controls.

Reset if:

You recently changed your wireless router or your Wi-Fi name or password.

You want to erase any stored settings.

QUICK TIP: On the Wemo Light Switch faceplate, the Reset button is also known as the Wi-Fi

Reset button, while the Restart button as the Power Restart button.

How to restart your Wemo Light Switch

To restart the Wemo Light Switch, press the Restart button for 1 second and then release. The Wi-

Fi Indicator light will begin to blink green to show it is restarting.

QUICK TIP: If the Wemo Light Switch is not responding to the Restart button, turn OFF the power

of the Wemo Light Switch by turning the circuit breaker OFF and then turning it back ON.

How to reset your Wemo Light Switch

Resetting using the Wemo App

Resetting using the Reset button

Resetting using the Wemo App

Step 1: Launch the App.

Step 2: Tap .

Step 3: Tap WeMo Light Switch.

Step 4: Tap Reset Options.

Step 5: Tap Reset Name, Rules & Data.

Resetting using the Reset button

IMPORTANT: This process will delete all previous settings done in the Wemo App and reset your

Wemo Light Switch to factory default settings. You will need to set up the Wemo Light Switch with

the Wemo App again.

Step 1: Press the Restart button for 1 second and then release. The Wi-Fi Indicator

light will begin to blink green to show it is restarting.

QUICK TIP: If the Wemo Light Switch is not responding to the Restart button, turn OFF

the power of the Wemo Light Switch by turning the circuit breaker OFF and then turning

back ON.

Step 2: Immediately press and hold the Reset button for 5 seconds. The Wemo Light

Switch Wi-Fi icon will blink orange rapidly, indicating a successful restore.

The Wemo Light Switch will take about 90 seconds to perform the restore. When ready, the Wi-Fi

Indicator light will begin to alternate between green and orange to show it is ready to be set up. For

setup instructions, click here.

Installation of the Wemo Light Switch to the electrical line

If you’re familiar and comfortable with basic electrical work, it only takes a few minutes to set up your Wemo

Light Switch. Otherwise, do not try and do it yourself, please call a professional electrician.

Electrical Installation Requirements

A Neutral wire (requires all three AC electrical connections at the wall switch)

A single pole light switch (not compatible with lights controlled by more than one switch)

The light switch box must be 2inches deep

IMPORTANT: The Wemo Light Switch is not designed to work with metal faceplates because they

interfere with the Wi-Fi signal. It is recommended to use the light switch for residential and dry indoor

locations only.

Once these electrical requirements are complete, proceed with the electrical installation instructions below.

Step 1: Shut OFF the power at the circuit breaker for the switch you are replacing. You

may need to shut OFF more than one circuit breaker/switch to make sure the switch you're

working on is powered OFF.

IMPORTANT: USE A NON-CONTACT VOLTAGE DETECTOR OR FLIP YOUR

LIGHT SWITCH A FEW TIMES TO MAKE SURE THAT THE POWER IS OFF.

Step 2: Unscrew and disconnect the wires from the old switch using a screw driver.

Step 3: Identify the wires on your Wemo Light Switch.

Switch (Live/Load) wires - On this light switch, the Switch wires are the two

black wires. Every light switch will have both of these wires. But they could be

either red or black in color.

Neutral wire - The Wemo Light Switch requires this wire, but isn't always present

in your electrical wiring at home. If present, the neutral wire is normally found

within the wall box with a wire nut on top of it.

Ground wire - If present, it should be plugged into the top of the light switch

here. It's normally green or copper in color. Don't worry if you can't find the

ground wire, Wemo Light Switch doesn't require one.

WARNING! THE FOLLOWING WIRING SCENARIOS MAY BE DANGEROUS

OR ILLEGAL.

NOTE: For more details, see Wiring your Wemo® Wi-Fi Smart Light Switch, F7C030

Step 4: Install the Wemo Light Switch. Connect each of the two black wires from the

Wemo Light Switch to the available Switch (Live/Load) wires. In case you found more

than one wire, just place them into the wire nut.

NOTE: The wire nut is the cap-like object connecting the wires.

Step 5: If you have a Ground wire (optional), disconnect it from the old switch and

connect it to the green wire on the Wemo Light Switch.

Table des matières

Autres manuels Belkin Changer

Belkin

Belkin F1DS102U - OmniView SOHO Series 2 Port KVM... Manuel utilisateur

Belkin

Belkin P75470ea Manuel utilisateur

Belkin

Belkin OmniView F1D104 Manuel utilisateur

Belkin

Belkin F5U301 - CableFree USB Hub Manuel utilisateur

Belkin

Belkin Wireless Gplus Notebook Card Manuel utilisateur

Belkin

Belkin OmniView F1D5102P Manuel utilisateur

Belkin

Belkin OmniView F1DN102DEA Manuel utilisateur

Belkin

Belkin 24-Port Gigabit Switch Manuel utilisateur

Belkin

Belkin F5U237VUK1 Manuel utilisateur

Belkin

Belkin F1DN104M Manuel utilisateur

Belkin

Belkin OmniView F1DK102P Manuel utilisateur

Belkin

Belkin OmniView PRO3 PS/2 Manuel utilisateur

Belkin

Belkin F1DH104L Manuel utilisateur

Belkin

Belkin F1DA108Q Manuel utilisateur

Belkin

Belkin F5U261 Manuel utilisateur

Belkin

Belkin OMNIVIEW P74696 Manuel utilisateur

Belkin

Belkin F1DM102U Manuel utilisateur

Belkin

Belkin OmniView ENTERPRISE Quad-Bus Series Manuel utilisateur

Belkin

Belkin OmniView Manuel utilisateur

Belkin

Belkin F1DN104K-3 Feuille d'instructions

Belkin

Belkin SOHO F1DS10XLea Manuel utilisateur

Belkin

Belkin F5D5131-16 - 10/100 Switch Manuel utilisateur

Belkin

Belkin OmniView F1DP101Mea Manuel utilisateur

Belkin

Belkin OmniView F1DS102P Manuel technique

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur