Belkin OmniCube P72462 Manuel utilisateur
The OmniCube™
User Manual
P72462 F1D094
The OmniCube™
User Manual
Thank you for purchasing the Belkin Components OmniCube™KVM
(Keyboard Video Mouse) switch. Controlling four PCs from one keyboard,
mouse and monitor has never been easier or more affordable!
The OmniCube™is small in size, but big in performance. Compatible with any
PS/2 style computer, it is loaded with features comparable with more
expensive KVM switches. It has complete keyboard and mouse emulation for
error-free
boot-ups, plus Microsoft®Intellimouse®support. The OmniCube™is also
designed to handle the most demanding resolutions up to 1600 x 1200,
without any noticeable degradation in image quality. Switching can be done
through the convenient front-panel pushbutton, or by keyboard hot-key
commands. And if you wish to control a Macintosh®computer, simply add the
2
Introduction
•Allows a user to control four PS/2 style computers from one keyboard,
mouse and monitor
•Keyboard and mouse emulation for error-free boot-ups
•Microsoft®Intellimouse®support
•Up to 1600 x 1200 resolution support
•Supports both AT and PS/2 style keyboards (AT requires AT-PS/2
adapter)
•Support VGA, SVGA and Multisync monitors
•Uses standard cables
•Pushbutton on keyboard hot-key command switching
•Auto-scan mode for even more convenience
•Audible feedback when switching
•Recalls CAPS LOCK, NUM LOCK and SCROLL LOCK keys' status for
each computer automatically
•Front-panel status LEDs
•Works with OmniView™PS/2 MAC Adapter™
•No software required
•One year product warranty
Package Contents:
OmniCube™4-Port F1D094
9VDC, 600mA power supply F1D065-PWR
This manual P72462
Registration card P72009
3
Features
4
Technical Specifications
Console Connectors:
Keyboard: Mini-DIN 6 female
Mouse: Mini-DIN 6 female
Monitor: HDDB15 female
Computer Port Connectors:
Keyboard: Mini-DIN 6 female
Mouse: Mini-DIN 6 female
Monitor: HDDB15 male
Dimensions:
Width: 7 1/4" (184mm)
Height: 1 3/4" (45mm)
Depth: 4 5/8" (118mm)
Weight: 1.6 lbs (727g)
Operating Temp: 32 to 104 deg. F (0~40 deg. C)
Storage Temp: -4 to 140 deg. F (-20~60 deg. C)
Humidity: 0~80% RH, non-condensing
1 2 3 4 Select
F1D094
Console
OmniCube™4-Port
VGA
MONITOR
RESET
PC4
DC 9V 500mA
VGA
PC3
VGA
PC2
VGA
PC1
+
5
Product Detail
PS/2 Keyboard
Connector
HDDB15 Female
Connector to Monitor
PS/2 Mouse
Connector
Port Status LEDs
Port
Select
Button
HDDB15 Male
Connectors
to Computer
VGA Ports
PS/2 Connectors to
Computer Keyboard ports PS/2 Connectors to
Computer PS/2 Mouse ports
Front View
Rear
View
PC Connectors
6
Make sure you have the right cables!
The OmniCube™requires two sets of cables to connect to the four computers
you will be controlling. Below are the Belkin part numbers and their
descriptions. We recommend purchasing PS/2 Cable Kits, as it contains all the
cables you need to connect one computer to the OmniCube™.
Includes:
• Two F2N036-06
• One F2N025-06-T
(see below for descriptions of each)
Individual Cables:
• PS/2 cable for keyboard and mouse ports
Mini-DIN6 male/male
Part #F2N036-XX
• Standard VGA cable for monitor port
HDDB15 male/female with thumbscrews
Part #F2N025-XX-T
Other Cables and Adapters:
• High-resolution/high-refresh rate VGA cable for monitor port
HDDB15 male/female with thumbscrews
Part #A3H981-XX
• AT to PS/2 keyboard adapter - for use with an AT-style keyboard
at the console of the OmniCube™
DIN5 female/ Mini-DIN6 male
Part #F2N017
• PS/2 to AT keyboard adapter - for use with a computer having
an AT-style key board port
Mini-DIN6 female/ DIN5 male
Part #F2N018
NOTE: The "XX" in the part number represents the length in feet.
Mini-DIN6
HDDB15
DIN5 Female Mini DIN6 Male
Mini DIN6 Female DIN5 Male
VGA
MONITOR
PC4
VGA
PC3
VGA
PC2
VGA
PC1
+
7
WARNING: Follow these directions closely and in the proper order.
Failure to do so may result in mouse and/or keyboard errors.
Before attempting to connecting anything to the OmniCube™or the
computers, make sure everything is powered off. Plugging and unplugging
cables may cause irreversible damage to your computers and the OmniCube™.
Belkin Components will not be held responsible for damage caused.
Hardware Installation
Back of OmniCube™
1. Find a convenient place to put
your OmniCube™. Its small size
makes it ideal for the desktop.
Take note of the length of your
cable kits so that your computers,
OmniCube™, keyboard, mouse and
monitor are distanced properly.
2. Connect the monitor to the
OmniCube™. Using the attached
cable which is included with your
monitor, connect it to the HDDB15
female port on the back of the
OmniCube™labeled "MONITOR".
OmniCube
™
4-Port
CONSOLE
F1D094
1 2 3 4 SELECT
8
3. Connect the keyboard and mouse to the OmniCube™. If you have an
AT-style keyboard, you will need an AT-PS/2 adapter (Belkin Part# F2N017).
4. Connect the first computer's VGA cable to the OmniCube™. Using the
VGA cable (Belkin Part# F2N025-XX-T or A3H981-XX), connect the male
end of the cable to the VGA port on the computer, and the female end on
the PC1 VGA port at the back of OmniCube™.
PC SERIAL
USB 1
USB 2
VGA MONITOR
ATKEYBOARD
PS/2 MOUSE
PS/2 KEYBOARD
PARALLEL
RJ45 NETWORK
ATSERIAL
VGA
MONITOR
RESET
PC4
DC 9V 500mA
VGA
PC3
VGA
PC2
VGA
PC1
+
PC SERIAL
USB 1
USB 2
VGA MONITOR
AT KEYBOARD
PS/2 MOUSE
PS/2 KEYBOARD
PARALLEL
RJ45 NETWORK
AT SERIAL
VGA
MONITOR
RESET
PC4
DC 9V 500mA
VGA
PC3
VGA
PC2
VGA
PC1
+
PS/2 Style Keyboard
Front of
OmniCube™
F2N025-XX-T
Back of OmniCube™
Back of PC
F2N036-XX
Back of OmniCube™
Back of PC
PS/2 Mouse
5. Connect the first computer's mouse cable to the OmniCube™. Using a PS/2
cable (Belkin Part# F2N036-XX), connect one end to the PS/2 mouse port
on the computer, and the other end to the PC1 mouse port on the back of
the OmniCube™.
9
6. Connect the first computer's keyboard cable to the OmniCube™. Using
another PS/2 cable (Belkin Part# F2N036-XX), connect one end to the
PS/2 keyboard port on the computer, and the other end to the PC1
keyboard port on the back of the OmniCube™. If your computer has an
AT-style keyboard port, you will need a PS/2-AT keyboard adapter
(Belkin Part# F2N018).
7. Double check all the connections. Make sure the keyboard and mouse
cables go to the correct ports.
8. Repeat steps 4-6 for the second, third and fourth computers.
9. Attach the power supply to the power supply connector at the back of
the OmniCube™. Plug this into any available AC outlet. You should see
an LED on the front panel blink, and hear a beep. Power up your monitor.
10.You can now power up both computers simultaneously. The first
computer will show up on the monitor. Check to see if the keyboard and
mouse works, as well as the image displayed on the screen. If this is okay,
press the SELECT button and check the functionality of the second
computer. If you find any errors, double check all the cable connections.
F2N036-XX
Back of OmniCube™
PC SERIAL USB 1
USB 2
VGA MONITOR
AT KEYBOARD
PS/2 MOUSE
PS/2 KEYBOARD
PARALLEL
RJ45 NETWORK
AT SERIAL
VGA
MONITOR
RESET
PC4
DC 9V 500mA
VGA
PC3
VGA
PC2
VGA
PC1
+
Keyboard Hot-Key commands:
To send commands to the OmniCube™, the SCROLL LOCK key must be
pressed twice within 2 seconds. You will hear a beep for confirmation. Below
are the different commands:
: Switch to Port 1 : Switch to Port 2
: Switch to Port 3 : Switch to Port 4
: Switch to previous port : Switch to next port
: Enables AutoScan mode.
In AutoScan mode, the OmniCube™remains on one port for 10 seconds before
switching to the next. There is no mouse or keyboard control in this mode.
This is necessary to prevent errors. Otherwise, if the user is moving the mouse
or using the keyboard when the OmniCube™switches to the next port, data
flow is interrupted and will cause erratic mouse movement and/or the wrong
characters to show up when using the keyboard.
To get out of AutoScan mode, hit the SPACEBAR.
OmniCube™
4-Port
CONSOLE
F1D094
1 2 3 4 Select
10
Usage
Selecting which computer to operate can be done either by pressing the
SELECT button, or through keyboard hot-key commands. You will notice that
after the OmniCube™ switches to another computer, the mouse will be
inoperative for about 1-2 seconds. This is normal operation and ensures that
proper mouse synchronization is established.
Pressing the SELECT button cycles
you through ports 1 - 4.
Scroll
Lock Scroll
Lock
3
Scroll
Lock Scroll
Lock
Scroll
Lock Scroll
Lock
0
Scroll
Lock Scroll
Lock
4
Scroll
Lock Scroll
Lock
Scroll
Lock Scroll
Lock
1
Scroll
Lock Scroll
Lock
2
Ce manuel convient aux modèles suivants
2
Table des matières
Autres manuels Belkin Changer
Belkin
Belkin OmniView F1DW116C Manuel utilisateur
Belkin
Belkin F5U237VUK1 Manuel utilisateur
Belkin
Belkin F1DN104M Manuel utilisateur
Belkin
Belkin F1D108-OSD - OmniView Pro KVM Switch Manuel utilisateur
Belkin
Belkin F5U221 Manuel utilisateur
Belkin
Belkin F5U271 Manuel utilisateur
Belkin
Belkin F5U237 Manuel utilisateur
Belkin
Belkin F1U117 Manuel utilisateur
Belkin
Belkin F5U304EAWHT Manuel utilisateur
Belkin
Belkin OMNIVIEW P72114 Manuel utilisateur
Belkin
Belkin F1DS102Jea Manuel utilisateur
Belkin
Belkin OmniView F1DP108G Manuel utilisateur
Belkin
Belkin OMNIVIEW PRO3 F1DA208ZEA Manuel utilisateur
Belkin
Belkin F1DL102UTT Manuel utilisateur
Belkin
Belkin OmniView F1DG102P Manuel utilisateur
Belkin
Belkin F5D5130-5 Manuel utilisateur
Belkin
Belkin F5D5141uk5 Manuel utilisateur
Belkin
Belkin F1DN104K-3 Manuel utilisateur
Belkin
Belkin F1U119 Manuel utilisateur
Belkin
Belkin F5U302DNGL Manuel utilisateur
