Barco R9898170 Manuel utilisateur

BARCOPROJECTIONSYSTEMS

R9898170

R9898171

Date:21.02..2001

INSTALLATION MANUAL

3-D Motorized Polar Circ/Lin Kit for Reality 909

Art.No.:R5976406Rev:00

Motrized 3-D Kit

R909

Due to constant research, the information in this manual is subject to change without notice.

Produced by BARCO NV, February 2002.

Trademarks are the rights of their respective owners.

BARCOn.v./ProjectionSystems

Noordlaan5

B-8520Kuurne

Belgium

Tel:+32/56/368211

Fax:+32/56/351651

E-mail : [email protected]

Visite Barco at the web : http://www.barco.com

Printedin Belgium

BARCO  3  Projection Systems

Description and Contents of the kit

Purpose of the

Kit

The kit is designed to be mounted on a BarcoReality 909 projector to allow passive 3D

projection.

To be continued on next page

Kit features The kit contains a polarholder, a control module (if motorized) and the necessary cables

and fixation parts.

Both left and right channel polarizers are included in the kit. Depending on the kitnumber

ordered the polarizers may be of the linear or the circular type.

The automatic desactivation of the polarisers allows the flexixbilty of:

-using a 3D (stereo) system as a monosystem

-using a 3D passif system as an actif system

Following table gives an overview of the different kitnumbers:

Specs

ircular/

inear

otorized

Kit n°

R9898170

R9898171

R9898170: circular 3D Kit containing:

R763847 UNR909 FRMC PLR CIRR MTR 1

R822703 FLTR PLR GL CIRC R 200X200 2

R822702 FLTR PLR GL CIRC R 179X179 1

or:

R763846 UNR909 FRMC PLR CIRL MTR 1

R822701 FLTR PLR GL CIRC L 200X200 2

R822700 FLTR PLR GL CIRC L 179X179 1

R9898171: Linear 3D kit containing:

R763849 UNR909 FRMC PLR CIRR MTR 1

R822762 FLTR PLR GL CIRC R 200X200 2

R822761 FLTR PLR GL CIRC R 179X179 1

or:

R763848 UNR909 FRMC PLR CIRL MTR 1

R822760 FLTR PLR GL CIRC L 200X200 2

R822759 FLTR PLR GL CIRC L 179X179 1

BARCO  4  Projection Systems

Description and Contents of the kit (Continued)

Illustrations

spacers: 4 x R822171

circ: left : R822700

right: R822702

lin: left: R822759

right: R822761

circ: left : R822701

right: R822703

lin: left: R822760

right: R822762

polarizers

Top view of the control module R763620

View of the Polar holder

Top view of the delivered cables

Z3488004

Z3484038

Z3486078

BARCO  5  Projection Systems

Mounting the polarizer frame

What has to be

done

The polarizer holder has to be mounted on the projector frame.

Necessary Tools M6 spanner (n° 10)

Mounting the

holder

To mount the holder, follow the next procedure:

1&2 (next

page)

3(next

page)

Unscrew the four bolts A of the middle lens, these bolts will

be used afterwards

tip : Unscrew them one at a time and replace them sys-

tematically with one of the delivered spacers (R822171)

Mount the polar holder on the projector, the four spacers

must be aligned with the four holes in the polar holder

Tighten the holder with the four bolts previously removed

from the lens

Step Action Image

Illustrations

Image 1

To be continued on next page

BARCO  6  Projection Systems

Mounting the polarizer frame (Continued)

Illustrations

Image 2

Image 3

To be continued on next page

BARCO  7  Projection Systems

Mounting the polarizer frame (Continued)

Illustration of the

spacers

(R822171)

mounted

Image 4

Image 5

Illustration of the

holder mounted,

(polarizers

activated)

BARCO  8  Projection Systems

Mounting the control module

What has to be

done

The module has to be mounted in the convergence drawer

Necessary Tools flat screwdriver

Mounting the

To mount the print, follow the next procedure:

5&6

Release the two handles of the drawer by pushing as

shown on the image

Pull the drawer ou of its housing

Place the print as shown on the image

Tighten the print with the 4 delivered screws.

Use the shortest yellow cable (7P) to connect the module

to the controller located as shown on the image.

Use the longest yellow cable (3P) to connect the print to

the Convergence module located as shown on the image

(connector A on image 6)

Use the cable with the BNC connectors to connect the

module (DIN connector side) to the motor (BNCs side)

Step Action Image

Illustrations

Image 2 Image 3

Image 1

BARCO  9  Projection Systems

Mounting the control module (Continued)

Illustrations

Image 4 Image 5

Image 6

BARCO  10  Projection Systems

Mounting the control module (Continued)

Illustration of the

motor connection

Image 7

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Barco Projecteur

Barco

Barco Wodan Manuel utilisateur

Barco

Barco IEX Series Manuel d'utilisation

Barco

Barco FL35 Manuel d'installation

Barco

Barco G50 Manuel utilisateur

Barco

Barco BARCOSLM R6 Manuel utilisateur

Barco

Barco DP2K-36BLP Manuel d'utilisation

Barco

Barco RLM W6 Manuel utilisateur

Barco

Barco R9002250 Manuel utilisateur

Barco

Barco GRAPHICS 808s Manuel utilisateur

Barco

Barco R9000901 Manuel utilisateur

Barco

Barco R9001390 Manuel utilisateur

Barco

Barco R9698236 Manuel utilisateur

Barco

Barco CLM HD8 Manuel

Barco

Barco MiPIX-20 Manuel utilisateur

Barco

Barco R9003110 Manuel utilisateur

Barco

Barco SLM G10 Performer Manuel

Barco

Barco FLM HD18 Manuel utilisateur

Barco

Barco ELM R12 Manuel utilisateur

Barco

Barco R9002328 Manuel utilisateur

Barco

Barco Helios Manuel utilisateur

Barco

Barco iD H250 Manuel utilisateur

Barco

Barco HDX 4K Manuel utilisateur

Barco

Barco GRAPHICS 808s Manuel utilisateur

Barco

Barco GRAPHICS 1208S R9000893 Manuel utilisateur

Manuels Projecteur populaires d'autres marques

iEmmet

iEmmet MP-312 Manuel utilisateur

Epson

Epson VS400 Manuel utilisateur

Sony

Sony VPL-HS10 Marketing Specifications & Features Manuel utilisateur

Sony

Sony VPL-HW65ES Manuel de service

Toshiba

Toshiba TLP-791U Manuel utilisateur

Philips

Philips LC1341 Guide de référence

Panasonic

Panasonic PTL735NTU - LCD PROJECTOR-NETWORK IB Manuel utilisateur

NEC

NEC NP600S EDU Manuel utilisateur

BenQ

BenQ SH753P Manuel utilisateur

Eiki

Eiki EK-623U series Manuel utilisateur

Epson

Epson PowerLite Pro Cinema 6020UB Manuel utilisateur

Epson

Epson PowerLite Home Cinema 705HD Manuel utilisateur

Christie

Christie LHD700 Manuel utilisateur

Navitar

Navitar FX Manuel utilisateur

InFocus

InFocus LitePro 560 Manuel utilisateur

Sony

Sony SRX-R815P Manuel utilisateur

Vivitar

Vivitar DP1500 X Manuel utilisateur

Acer

Acer C20 Series Manuel utilisateur