Aztech MSP2950(W) Manuel utilisateur

Page 1 of 3

Troubleshooting Guide

(You may print out the entire section for your easy reference)

Q1: This modem is set to V.90, but why am I getting slow connections to my

ISP?

A1: The majority of telephone lines and ISPs are already supporting V.90

connections. However, like all data connection, the connection is sensitive to

the amount of noise present in the phone line.

Hence, only very “clean” phone line can get high connection rate or

throughput. You may want to check with your telephone provider.

Q2: The modem hangs up when an incoming call is received. Why?

A2: Disable the Call Waiting function for the Online Service, Internet Connection

and/or communications software you are using.

Q3: When I tried to dial out, the system gave me an error message “No Dial

Tone”. Why?

A3: Check your Telephone Cable connection. If necessary, plug out the Telephone

Cable and reconnect the cable.

To check if it is due to a faulty telephone extension cable that you are using,

connect the cable to a Telephone set. Listen to the handset dial tone. If there is

no dial tone, there is most probably some problem with your telephone

extension cable.

Q4: There are incomprehensible characters appearing on the screen. Why?

A4: The data, parity and stop bit settings are incorrect. Try using the default values

or check with your ISP.

Q5: My system does not detect the modem card when I boot up for the first

time. Why?

A5: Make sure that your card is fully inserted into the PCI-Bus slot. However, if

you are sure that the card has been properly installed, do the following:

For Windows® 98 / 98 SE / Windows® ME

1. From your Windows desktop, right-click on My Computer icon and click

Properties.

2. Click on the Device Manager tab.

Page 2 of 3

3. Double-click on the Modem device. You should see the Smart Link 56K

Voice Modem is being listed.

4. If you see a yellow exclamation mark besides Smart Link 56K Voice

Modem, it means that your driver is not installed successfully. Click on the

device and click Remove. Click on Refresh and install your driver again

(please refer to STEP 2 of the Installation Manual).

For Windows® XP / Windows® 2000

1. From your Windows desktop, right-click on My Computer icon and click

Properties.

2. Click on the Hardware tab and then click Device Manager.

3. Double-click on the Modem device. You should see the Smart Link 56K

Voice Modem is being listed.

4. If you see a yellow exclamation mark besides Smart Link 56K Voice

Modem, it means that your driver is not installed successfully. Right-click

on the device and then uninstall the modem. Restart the system and then

install your modem driver again (please refer to STEP 2 of the Installation

Manual).

However, if the system still cannot detect the modem, you may wish to try

using a different PCI-Bus slot instead.

Q6: I have done a diagnostics test of my modem and there is nothing wrong

with it. However, when I use the communication software, there seems to

be an error. Why?

A6: Try to use a different telephony application like Microsoft Fax to fax a

document. If the sending of a fax is successful, then the fax function of your

modem is working fine.

Try to use Hyperterminal to dial up to the ISP. If the connection is

successful, then the data function of your modem is working fine.

Try exiting the communications software and running it again.

Page 3 of 3

Q7: While testing the modem, the system gave an error message stating that it

was unable to open the COM Port. Why?

A7: Make sure that you have closed all communication software (e.g.

Hyperterminal, Dial-up Networking, etc.) when you are doing the diagnostics

test.

However, if there is no communications software running, do the following:

For Windows® 98 / 98 SE / Windows® ME

1. From your Windows desktop, right-click on My Computer icon and click

Properties.

2. Click on the Device Manager tab.

3. Double-click on the Modem device. You should see the Smart Link 56K

Voice Modem is being listed.

4. If you see a yellow exclamation mark besides Smart Link 56K Voice

Modem, it means that your driver is not installed successfully. Click on the

device and click Remove. Click on Refresh and install your driver again

(please refer to STEP 2 of the Installation Manual).

For Windows® XP / Windows® 2000

1. From your Windows desktop, right-click on My Computer icon and click

Properties.

2. Click on the Hardware tab and then click Device Manager.

3. Double-click on the Modem device. You should see the Smart Link 56K

Voice Modem is being listed.

4. If you see a yellow exclamation mark besides Smart Link 56K Voice

Modem, it means that your driver is not installed successfully. Right-click

on the device and then uninstall the modem. Restart the system and then

install your modem driver again (please refer to STEP 2 of the Installation

Manual).

Table des matières

Autres manuels Aztech Modem

Aztech

Aztech 100U Fiche d'information produit

Aztech

Aztech MSP3880U Series Manuel utilisateur

Aztech

Aztech HL110EW Instructions d'utilisation

Aztech

Aztech DSL700P Manuel utilisateur

Aztech

Aztech HW831 Manuel utilisateur

Aztech

Aztech MR8800-U Manuel utilisateur

Aztech

Aztech DSL Turbo 900 Package Manuel utilisateur

Aztech

Aztech 100U Fiche d'information produit

Aztech

Aztech HomePlug AV with Simple Connect Button Manuel utilisateur

Aztech

Aztech DSL Turbo 900 Package Manuel utilisateur

Aztech

Aztech DSL Turbo 900 Package Manuel utilisateur

Aztech

Aztech EM6800 Manuel utilisateur

Aztech

Aztech DSL Turbo 900 Package Manuel utilisateur

Aztech

Aztech MDP3880-U Manuel utilisateur

Aztech

Aztech HW550-3G Instructions d'utilisation

Aztech

Aztech DSL905E Series Manuel utilisateur

Aztech

Aztech MDP3880SP-U Manuel utilisateur

Aztech

Aztech DSL305E Instructions d'utilisation

Aztech

Aztech 206U Manuel utilisateur

Aztech

Aztech DSL500U Fiche d'information produit

Aztech

Aztech DSL 1015EN L Mode d’emploi

Aztech

Aztech MDP3858U Series Manuel utilisateur

Aztech

Aztech MDP3880SP-U Manuel utilisateur

Aztech

Aztech PCI 56K Fiche d'information produit

Manuels Modem populaires d'autres marques

Davicom

Davicom DM562AP Manuel utilisateur

EpiValley

EpiValley TATA indicom SXC-1080 Manuel utilisateur

Zte

Zte WiMAX Manuel utilisateur

Intelimax

Intelimax MA-2060 Manuel utilisateur

SMC Networks

SMC Networks D3CM1604V Manuel d'utilisation et d'entretien

Telstra

Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur

Thrane&Thrane

Thrane&Thrane imarsat EXPLORER 300 Manuel utilisateur

Samsung

Samsung AceLink SAM-335A Manuel utilisateur

Enfora

Enfora Enabler-G Guide de configuration rapide

iRZ

iRZ ATM2-232 Manuel utilisateur

Zhone

Zhone 6310 Manuel utilisateur

Paradyne

Paradyne Hotwire 7976 Manuel utilisateur

US Robotics

US Robotics 3453C Manuel utilisateur

MaxTech

MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur

Zte

Zte MF823 Manuel utilisateur

Four-Faith

Four-Faith F1403 Manuel utilisateur

Sierra Wireless

Sierra Wireless AIRLINK MP595W Manuel utilisateur

Gemtek

Gemtek WiMAX WIXFBR-103 Manuel utilisateur