Axon P900 Series Manuel utilisateur
ManualePOSserie900
-2-
-3-
`INDEX
Chapter 1. Caution Chapter 3. BIOS SETUP
UTILITY
Chapter 5. Motherboard jumper setting
1-1. Warranty
………………………………………………. 3 3-1. Introduction
…………………………………………….. 25 5-1. Motherboard Layout
…………………………………………… 38
1-2. Copyright
……………………………….…………….. 4 3-2. BIOS Flash Memory Organization
…………... 26 5-2. Diagram
………………………………………………………………. 41
1-3. Notice for safety
………….………………………… 4 3-3. Resource Configuration
…………………………… 27 5-3. Serial port
……………………………………………………………. 42
1-4. Circumstance limitation
…………….………… 5 3-4. Resource Configuration
…………………………… 27 5-4. Jumper
setting…………………………………………..……………. 43
1-5. Installation tips
…………………………………….. 7 3-5. Legacy USB Support
………………………………... 28
3-6. BIOS Updates
…………………………………………... 28 Chapter 6. Replacement
Chapter 2. Product overview 3-7. BIOS Recovery
…………………………………………. 30 6-1. Safety & danger precaution ……………………………..... 44
2-1. Checking package
……………………………….. 8 3-8. Boot Options
…………………………………………… 30 - Rear cover change
…………………………………………………. 45
2-2. Preparing before installation
…………….…. 11 3-9. Adjusting Boot Speed
……………………………... 32 - Motherboard change
………..……………………………………. 46
2-3. Product consist
……………….…………………… 11 3-10. BIOS Security Features
………………………….. 33 - HDD change
…………………………………………………………… 52
2-4. Setup Optional Item 15 - Power supply change 53
-4-
………………………………. ……………………………………………...
- CDP installation
…………….……………….…………. 15 Chapter 4. Trouble-shooting - MSR change
…………………………………………………………… 54
- Installation of Keyboard & mouse
…..………. 16 4-1. Network trouble
………………………………………. 34 - MEMORY change
…..………………………………………………. 55
- Installation of USB device
………………………... 17 4-2. MSR trouble
……………………….……………………. 34 - HEATSINK change
……………..…………………………..………. 56
- Ethernet port connection
…………………………. 18 4-3. USB trouble
…….……………………………………….. 35 - monitor change
………………………………………………….….. 57
- Speaker and MIC. connection
………………….. 19 4-4. LCD trouble
……………..………………………………. 35 - Monitor AD board, Control board, Hub board,
- Printer connection
……………………………….……. 20 4-5. Touch screen trouble
………………………………. 35 Touch controller, Inverter, LCD Panel change …………… 60
- Power cable connection
………..………………..... 21 4-6. Power trouble
……………………………………..….. 36
- POS operating
…………………………...……………… 22 4-7. PS/2 Keyboard trouble
………………………….... 36 6-2. Power Supply Connectors 64
- POS closing
………………………………………………. 23 4-8. Boot trouble
…………………………………………….. 36 6-3. Reference to upgrade and power supply …………...... 66
- System driver
……………….…………………………… 24 4-9. Printer trouble
…………………………………………. 37 6-4. SlimPOS ATOM specification
………………………………. 67
-5-
Chapter 1. Caution
1-1. Warranty
We guarantee our POS terminal product and its parts against defects in materials and workmanship under proper use for a standard period of 2 years from the date
of original purchase.
During this period, we will repair or replace a defected and/or faulty product or parts without charge for spare and labor to the purchaser.
The 1st year is applied with free workmanship and new or refurbished replacement parts with one-way freight cost born by the seller and the customer shall be
responsible for return delivery charge.
The 2nd year is applied also non chargeable for workmanship and parts, but limited warranty with round-way freight cost born by the customer.
Products out of the warranty period or scope shall be diagnosed at customer's expense.
We will charge for repair and delivery in case of customer's handling mistake, carelessness and natural disasters.
1-2. Copyright
This publication including all photograph, illustration and software, is protected under international copyright law with all rights reserved in manufacturer.
Neither this manual, nor any of the material contained herein, may be reproduced without written consent of the author.
-6-
1-3. Notice for safety
1. We recommend using proper power voltage against fire and electric shock.
2. Avoid exposing the product to direct sunlight and do not use the product near area of high moistures.
- It might cause low reliability and operating disorder.
3. Be aware of electro-static on PCB of system with anti-static appliance.
- It is possible to be reason for low reliability and short life term.
4. Place a product away from static occurred area.
- It is a matter to be low performance and reduce life cycle.
5. Do not disturb metal material or obstacle in product.
- It is dangerous about fire and electric shock.
6. Use product in simple power cord plug-in circumstance.
- It is occurred to fire, electric shock and system disorder on electricity.
7. Be careful of other electronics having possibility with high frequency, electronic and magnetic affect (Ex. Audio, Electronic-range, etc)
- There is a strong possibility to make a product out-of-order or system error.
1-4. Circumstance limitation
● Installation and maintenance service
We recommend you to have service about product installation, maintenance and repair service from nominated service center and agent office.
It is not our responsibility about out of order or system error after service and/or checking system from non predicted service provider.
-7-
● Notice against high frequency
This product is qualified by FCC, CE, EMI and MIC compliance, thus it is governed with the previous qualification regulation to the safety.
However, it is affected by the other high frequency generated.
We don't consider system error and disorder due to the above affection.
● Notice about noise
We request to use our product away from heater, motor, fluorescent light, TV and similar which makes noise sounds. Electric noise makes interruption and
interference against normal operating.
● Request of installation circumstance
The most suitable environment is within 65% humidity in 10 ~ 30℃ temperature. Please also install and use out of direct sun-light.
● Cleansing
It is caused of damage on appearance and exterior surface after cleaning with chemical cleanser. We recommend you to use soft cloth, especially LCD screen.
● Product liability
-8-
1. We prohibit product to use for other purpose, but not POS.
It is not supported of usual PC operating & interface support.
2. This is for professional business field only to shop, not home appliance.
3. This is consisted with hardware and software politically.
4. It is guaranteed normal operating on stable power supply.
1-5. Installation tips
1. Avoid installing in lightning and thunderstorm day. (Dangerous to expose electricity)
2. Be away from damp space and water-leaked place for installation.
3. Be aware of static occurrence during installation.
-9-
4. Allow using only ground connected and quality certificated power code and cable.
5. Keep out of direct sun-light, extreme high or low temperature, and humid area.
6. Take away from impact, shocked, and tremble place.
7. Place product to avoid with sewing machine, Welding instrument, electronic wave range, Audio and other high frequency generated equipment.
8. Do not recommend to use next by air conditioner.
9. Prohibit connecting cables under carpet and floor.
11. Use another power code from high power source appliances.
(Ex. Electronic heater, Electronic wave range, Audio, Air-conditioner, Refrigerator, etc)
12. Do not recommend to use multiple connections in same power outlet/socket.
-10-
Chapter 2. Product overview
2-1. Checking package
1. Confirm packing detail which is listed on user manual in package.
2. We provide POS terminal main unit, power cord, user manual and driver CD basically.
» It is possible to download user manual and driver CD from our web.
Table des matières
Autres manuels Axon Terminal tactile
Manuels Terminal tactile populaires d'autres marques
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Manuel utilisateur
Ingenico
Ingenico AXIUM EX4000 Manuel utilisateur
Heisei Electronics
Heisei Electronics Q-POS 815 Manuel utilisateur
Amano
Amano MTX-15 Manuel utilisateur
FLOWBIRD
FLOWBIRD CWT Compact Touch Manuel utilisateur
Demco
Demco SP7 Manuel utilisateur
