Award VTC820 Manuel utilisateur
VTC820
Full-Size Socket 478 Pentium 4
Intel 845G CPU Card
USER’S MANUAL
Version 1.0
ii VTC820 User’s Manual
Acknowledgments
Award is a registered trademark of Award Software International,
Inc.
PS/2 is a trademark of International Business Machines
Corporation.
Intel and Pentium 4 are registered trademarks of Intel Corporation.
Microsoft Windows is a registered trademark of Microsoft
Corporation.
Winbond is a registered trademark of Winbond Electronics
Corporation.
All other product names or trademarks are properties of their
respective owners.
VTC820 User’s Manual iii
Table of Contents
Introduction.....................................................................1
Product Description ........................................................1
Checklist........................................................................2
Specifications .................................................................3
Board Dimensions...........................................................4
Installations......................................................................5
Installing the CPU...........................................................6
ATX Power Installation...................................................7
MicroPCI Daughter Card Installation...............................7
Installing the Memory......................................................8
Setting the Jumpers.........................................................9
Connectors on VTC820 ....................................................14
Watchdog Timer...........................................................26
BIOS Setup...................................錯誤! 尚未定義書籤。
Drivers Installation.....................錯誤! 尚未定義書籤。
Appendix ......................................錯誤! 尚未定義書籤。
A. I/O Port Address Map....................
錯誤
!
尚未定義書籤。
B. Interrupt Request Lines (IRQ) ........
錯誤
!
尚未定義書籤。
iv VTC820 User’s Manual
This page is intentionally left blank.
INTRODUCTION
VTC820 User’s Manual 1
Introduction
Product Description
The VTC820 Pentium 4 Full Size PICMG CPU Card incorporates the Intel®
advanced 845G Chipset Memory Controller hub and supports 478-pin
Intel Pentium 4 processors of 1.3GHz and up to 2.6GHz+ with FSB
533MHz/400MHz. VTC820 supports the Pentium 4 processor with 256-KB
L2 cache and the Pentium 4 processor with 512-KB L2 cache on 0.13
micron process.
The I/O functions are on VTC820 integrated onto the ICH4. It supports
either the integrated graphics device (IGD) on the GMCH or an external
graphics device on AGP. The IGD has 3D, 2D, and video capabilities. The
system memory size can be up to 2 GB, using the two DDR sockets on
board. Six USB ports are supported with the USB 1.1/2.0 standard.
VTC820 optionally supports the ATI Mobility M7 graphics controller with
16MBor32MBembeddedmemory.InterfacesupportedareLVDS,TMDS
anddualCRT.TheVGAfunctionalityoffersunprecedentedvideoquality
and integratedMPEG-2decodecapability. VTC820 also optionally comes
with an Intel 82540 Gigabit LAN controller for faster networking access.
VTC820 supports a MicroPCI socketfor MicroPCIdaughtercardswithVGA,
VGA/LAN, Ethernet (LAN), SCSI, and IEEE 1394 functions.
This CPU card represents the perfect choice for those who want superior
performance for rugged and demanding applications in industrial
automation, image processing, multimedia and telecommunications.
INTRODUCTION
2VTC820 User’s Manual
Checklist
Your VTC820 package should include the items listed below.
•
The VTC820 Industrial CPU Card
•
This User’s Manual
•
1 IDE Ribbon Cable
•
1 Floppy Ribbon Connector
•
2 Serial Port Ribbon Cable and 1 Parallel Port Attached to a
Mounting Bracket
•
1 Y-Cable supporting a PS/2 Keyboard and a PS/2 Mouse
•
1 CD containing the following:
•
Chipset Drivers
•
Flash Memory Utility
•
Optional audio cable with bracket (Audio8K)
•
Optional USB cable with bracket (USB2K)
•
Optional Secondary CRT VGA cable with bracket (VGA4K)
•
Optional TMDS/CRT cable with bracket (ID120P)
INTRODUCTION
VTC820 User’s Manual 3
Specifications
CPU Socket Socket 478
CPU Intel Pentium 4, 1.30GHz ~ 2.6GHz+
CPU Front Side Bus 533MHz / 400MHz
Chipset Intel 845G Chipset
L2 Cache 128K/256K/512K, CPU integrated
BIOS Award BIOS, ACPI supported
System Memory Two DDDR sockets, up to 2GB DDR SDRAM
Integrated VGA Intel 845Gintegrated VGA
Supports CRT interface
Optional VGA ATI Mobility M7 graphics controller
16MB/32MB embedded memory
Frame buffer (DDR, AGP4)
LVDS/TMDS/dual CRT interface
LAN ICH4 integrated Ethernet controller
10Base-T / 100Base-TX Protocol
Optional Gigabit Ethernet solution
Audio ICH4 integrated audio
Optional AC97 codec and audio cable
LPC I/O W83627HF chipset supports IrDA x 1, Parallel x 1, COM1
(RS232), COM2 (RS232/422/485), FDC up to 2.88MB
(3Mode support) Hardware Monitor (3 thermal inputs, 6
voltage monitor inputs, VID0-4, 3 fan headers)
IDE Interface Built in ICH4; Two enhanced IDE supports 4 IDE devices
including UDMA33/66/100, PIO mode 4 and bus master
FDD Interface Supports up to two floppy disk drives: 3.5" and/or 5.25"
drives; 3 Mode support
Parallel Port One parallel port supports SPP/EPP/ECP
Serial Ports One RS-232/422/485 and one RS-232 port
Watchdog Timer Generates system reset; 256 levels
SSD Interface Supports 2MB~144MB M-Systems DiskOnChip flash disk
Hardware Monitoring Built in W83627HF; monitors system/CPU temperature
and voltage status
USB Supports 6 USB ports, USB 1.1/2.0 compliant
IrDA Pin header
Keyboard and Mouse PS/2 type connectors
Extra Features ISA High Drive, PCI to ISA Bridge (ITE 8888)
One MicroPCI socket, ATX 12V power connector
Power Consumption Pentium 4 1.8GHz with 512MB DDR SDRAM
+5V: 5.7A +12V: 8.5A
Pentium 4 2.2GHz with 512MB DDR SDRAM
+5V: 6.4A +12V: 6.3A
Form Factor Full Size CPU Card
Dimensions 338mm x 122mm (13.3”x 4.8”)
INTRODUCTION
4VTC820 User’s Manual
Board Dimensions
INSTALLATIONS
VTC820 User’s Manual 5
Installations
This section provides information on how to use the jumpers and
connectors on the VTC820 in order to set up a workable system. The topics
covered are:
Installing the CPU ..............................................................6
ATX Power Installation ......................................................7
MicroPCI Daughter Card Installation...................................7
Installing the Memory.........................................................8
Setting the Jumpers.............................................................9
Connectors on VTC820........................................................14
Watchdog Timer...............................................................26
INSTALLATIONS
6VTC820 User’s Manual
Installing the CPU
The VTC820 CPU Card supports a Socket 478 processor socket for Intel
Pentium 4 processors.
The Socket 478 processor socket comes with a lever to secure the
processor.Raisethislevertoabouta90°angletoallowtheinsertionofthe
processor. Place the processor into the socket by making sure the notch
on the corner of the CPU corresponds with the notch on the inside of the
socket. Once the processor has slide into the socket, return the lever to
the lock position. Refer to the figures below.
After you have installed the processor into the socket, check if the
jumpers for the CPU type and speed are correct.
NOTE:Ensure that the CPU heat sink and the CPU top surface are in total
contact to avoid CPU overheating problem that would cause your
system to hang or be unstable.
Table des matières
Autres manuels Award Matériel informatique
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
