AVYCON AVC-ELN41FT 2.8 Manuel utilisateur

AVC

ELN41FT_2.8

4MP WATER-PROOF TURRET NETWORK CAMERA

QUICK START GUIDE

Warning and Caution...............................................................................................................

Package Content..................................................................................................................................

Overview...................................................................................................................................

Overview: Connecting Network Cable ..................................................................................

Network Connection.................................................................................................................

TABLE OF CONTENTS

Camera Installation .................................................................................................................. 5

4MP WATER-PROOF TURRENT NETWORK CAMERA| AVC-ELN41FT_2.8

Warning and Caution

If the product does not work properly, please contact your dealer or the nearest

service center. Never attempt to disassemble the camera yourself. (We shall not be responsi-

ble for any problems caused by unauthorized repair or maintenance.)

Do not allow water or liquid intrusion into the camera.

In the use of the product, you must be strict compliance with the electrical safety

regulations of the nation and region. When the product is mounted on wall or ceiling, the

device shall be ﬁrmly ﬁxed.

Do not use camera beyond speciﬁed voltage range.

Do not drop the camera or subject it to physical shock.

Avoid touching the camera lens.

If cleaning is necessary, please use clean cloth to wipe it gently.

Do not aim the camera at the sun or extra bright place.

Do not place the camera in extremely hot, cold (the operating temperature shall be

-30˚C~60˚C), dusty or damp locations, and do not expose it to high electromagnetic radia-

tion.

To avoid heat accumulation, good ventilation is required for operating environment.

Please read this instruction carefully before operating the unit and keep it for

further reference.

All the examples and pictures used here are for reference only.

The contents of this manual are subject to change without notice.

Package Contents

AVC-ELN41FT_2.8

ITEMS

DEFAULT

QUANTITY DESCRIPTION

Avycon Network Camera 1 Pc The purchased model

Quick Start Guide

Drill Template

1 Pc

Printed material

Tapping Screws 3 Pc Materials

1 Pc Material

Rubber Plug 1 Pc Material

Screwdriver 1 Pc Material

Plastic Plug 3Pc Material

Caution

* Do not expose the product to rain moisture

* Make sure the device is ﬁrmly ﬁxed when mounting it on the wall or ceiling

* Make sure that the power supply voltage is correct before using ther camera

* Do not use a 3rd party Power Adapter

* Never attempt to disassemble or modify the camera

System Requirements

OPERATING SYSTEM: Windows XP / Vista / 7 / 8 / 10 / 11 / Server 2000 / Server 2008

CPU: 1.66 Ghz or Higher

RAM: 1G or Higher

Graphic Memory: 128MB or more

Internet Protocol: TCP / IP (IPv4 / IPv6)

Plastic plug x 3

DrilltemplateRubber plug ScrewdriverQuick Start Guide

CD Tapping screws x3

Camera

4MP WATER-PROOF TURRENT NETWORK CAMERA | AVC-ELN41FT_2.8

Thank you for purchasing this AVYCON IP Network Camera. This guide provides basic

instructions on installing and accessing this IP Network Camera. For more details, please

refer to the User Manual.

Overview

AVC-ELN41FT_2.8

4MP WATER-PROOF TURRENT NETWORK CAMERA| AVC-ELN41FT_2.8

1 Ethernet connector

2 Audio input connector

3 Power connector

4 Mounting base

5 Fixed screw

6 Microphone

7 Micro SD card slot

8 Reset

Overview - Connecting Network Cable

AVC-ELN41FT_2.8

4MP WATER-PROOF TURRENT NETWORK CAMERA | AVC-ELN41FT_2.8

Security Cap

DC12V

* 1,It is recommended to install the security cap for outdoor installation.

* 2, If the PoE switch is used to power the camera that supports PoE power supply,

DC12V power supply is not required.

Step 1: Loosen the nut from the main element.

Step 2: Run the network cable (without RJ 45 connector) through the both elements. Then

crimp the cable with RJ 45 connector.

Step 3: Connect the cable to the hermetic connector. Then tighten the nut and the main

cover.

Please make sure that the wall or ceiling is strong enough to withstand 3 times the weight of

the camera. Please install the camera under dry environment.

Step 1: Loosen the ﬁxed screw to disassemble the camera. Then remove the cover of the

dome and then insert a micro SD card. After that, install the cover back. . After that, install the

cover back to the dome and ﬁx it ﬁrmly with the screws.(please install the cover back in the

same way you disassemble, in case the sealing performance is affected.)

Step 2: Attach the drill template to the place where you want to ﬁx the camera. Then drill the

screw holes and the cable hole in the wall according to the drill template.

Camera Installation

AVC-ELN41FT_2.8

4MP WATER-PROOF TURRENT NETWORK CAMERA | AVC-ELN41FT_2.8

Lorem ipsum

FixedScrew

Cover

Insert a micro SD card

∅108

∅97.5

84.4mm

∅4.5

48.7mm

120° 120°

24.4mm

FixedScrew

Cover

Insert a micro SD card

Then install back the dome to the camera with the ﬁxed screws.

4MP WATER-PROOF TURRENT NETWORK CAMERA | AVC-ELN41FT_2.8

Step 3: Route and connect the cables and then secure the camera to the ceiling or wall with

the screws.

Step 4: Adjust the camera to obtain an optimum angle by loosening the ﬁxed screws.

Before adjustment, preview the image of the camera on a monitor.

Step 5: Tighten the ﬁxed screws after you ﬁnish adjusting the view angle of the camera.

Rubber Plug

Fixed Screw

Access through IP-Tool

Here we take accessing IP camera via LAN for example.

Network Connection

AVC-ELN41FT_2.8

4MP WATER-PROOF TURRENT NETWORK CAMERA | AVC-ELN41FT_2.8

IPC

Network Cable Network Cable

Router

Switch

Computer

DeviceNetworkSearch

name

ImmediateRefresh

name

IPC

unknown

192.168.226.201

192.168.1.2

192.168.1.3

9008

255.255.

Modify Network Parameter

Mac Address

IP Address

Modify

CE :98 :23 :75 :35 :22

192.168. 226. 201

255. 255. 255. 0

192.168. 226. 1

Tip: Enter the administrator password, and

Total Device: 3

then modify the network parameters.

Device NameDevice Type IP AddressHttp PortData PortSubnet

About

Product Model

Local IP Address:192.168.1.4Subnet Mask:255.255.255.0Gateway: 192.168.1.1DNS：210.21.196.6

Subnet Mask

Gateway

Restore IPC Default Configuration

Step 1:Make sure that the camera and the PC are well connected to the local network.

Step 2: Install IP-Tool from the CD and run it after installation.

Step 3: Double click the camera information listed in the IP-Tool to open the web browser.

Or manually enter the default IP address in the address bar of your browser.

The default IP address of this camera is 192.168.226.201. Then follow directions to download

and install the plugin if prompted.

Step 4: Activate and log in the camera. The default username is admin; the default password

is 123456 or you need to self-deﬁne the password. Please operate according to the actual

situation.

phone: 949-752-7606

email: [email protected]

social: @avycon_aivo

website: avycon.com

Table des matières

Autres manuels AVYCON Caméra de sécurité

AVYCON

AVYCON AVC-DH52VT Manuel utilisateur

AVYCON

AVYCON AVC-NPTZ21X23L Manuel utilisateur

AVYCON

AVYCON AVC-BLN41AVT Manuel utilisateur

AVYCON

AVYCON AVC-NBL41M-L1 Manuel utilisateur

AVYCON

AVYCON AVC-PHN61FLT Manuel utilisateur

AVYCON

AVYCON AVC-NBL41M-L1 Manuel utilisateur

AVYCON

AVYCON AVC-PHN21X20LW Manuel utilisateur

AVYCON

AVYCON AVC-BT91FT Manuel utilisateur

AVYCON

AVYCON AVC-NBM81F180 Manuel utilisateur

AVYCON

AVYCON AVCNPTZ51X30L Manuel utilisateur

AVYCON

AVYCON AVC-BH52VT Manuel utilisateur

AVYCON

AVYCON AVC-VH52VLT Manuel utilisateur

AVYCON

AVYCON AVC-TV21F28 Manuel utilisateur

AVYCON

AVYCON AVC-TE81F28 Manuel utilisateur

AVYCON

AVYCON AVC-LA92VT Manuel utilisateur

AVYCON

AVYCON AVC-BLN41FT 2.8 Manuel utilisateur

AVYCON

AVYCON AVC-NPTZ21X30L Manuel utilisateur

AVYCON

AVYCON AVC-NPTZ51X12L Manuel utilisateur

AVYCON

AVYCON AVC-NPTZ81X36L Manuel utilisateur

AVYCON

AVYCON CAT5 Manuel utilisateur

AVYCON

AVYCON NTSC Manuel utilisateur

AVYCON

AVYCON AVC-BHN41FT2.8 Manuel utilisateur

AVYCON

AVYCON SPEC Manuel utilisateur

AVYCON

AVYCON AVC ELN41AVT Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur