Avocent SWITCHVIEW PC Manuel utilisateur

The following instructions will help you

connect your SwitchView unit.

Should you require further assistance, please

contact Avocent Technical Support.

(Optional) Powering the

SwitchView unit

Power down all computers that will be attached to your

SwitchView unit. If necessary, plug one end of the power

supply (sold separately) into the power socket on the

rear of the SwitchView unit. Plug the other end into an

appropriate AC power source.

Connecting the peripheral devices

Plug your VGA monitor into the port labeled CONSOLE

on the back of the SwitchView. Plug your keyboard and

mouse into the labeled ports on the front of the unit.

Connecting the first computer

Locate an Avocent SVPS2C-6A or SVPS2C-9A cable

(sold separately). Attach one end to the corresponding

connectors on the first computer to be attached to the

SwitchView. Route the other end of the cable to the

SwitchView and attach the remaining connectors to

an available port set. The port sets are labeled to

correspond with the channels on the unit.

Connecting the remaining computers

Repeat step 3 to connect additional computers.

Powering attached computers

Next to each port is a blue LED. A blinking LED indicates

that the attached computer is not powered.

Power the first attached computer. Wait until it has

completely booted before switching to the next

computer and repeating the process.

Avocent, the Avocent logo, The Power of Being There and SwitchView are trademarks or registered trademarks of Avocent Corporation or its affiliates. All other marks are the property of their respective owners. ©2003 Avocent Corporation. All rights reserved. 590-367-113B

Quick Installation Guide

SwitchView PC

The Power of Being There

To connect a SwitchView PC

Plug in the monitor,

followed by

the keyboard

and mouse.

(Optional) Power

down your

computers and attach

the appropriate

power supply.

Connect the first

computer to the

SwitchView unit.

Plug in the remaining

computers to the

SwitchView unit.

Power up all

attached

computers.

NOTE: All drivers necessary for the SwitchView

are built into the unit. If you are installing the unit

with a Windows operating system and are

prompted for drivers, press NEXT until the

configuration is complete.

NOTE: If keyboard or mouse issues arise when

using a low-power system such as a laptop, you

should order an optional power supply by

contacting Avocent Technical Support.

DC 12V, 1A

PC4 PC3 PC2 PC1

CONSOLE

590-367-113B

Selecting a channel

A channel may be selected in one of the following ways:

• Pressing the button corresponding to the

relevant computer

• Using a hotkey command

The following instructions will help you

operate your SwitchView unit.

Should you require further assistance, please

contact Avocent Technical Support. Using Hotkey Commands

A hotkey command can be used by pressing a series of

key sequences:

• <CTRL><CTRL> <X*> switches the keyboard,

mouse and video simultaneously to another system.

• <CTRL><CTRL> <LEFT ARROW**> toggles scan

mode on or off.

• <CTRL><CTRL> <RIGHT ARROW**> resets and

reinitializes the mouse in case of lock up.

* <X> = the port number of the attached computer

** <SCROLL LOCK><SCROLL LOCK> can be

substituted in any hotkey sequences that use

Quick Installation Guide

SwitchView PC

To operate a SwitchView unit

The Power of Being There

Autres manuels pour SWITCHVIEW PC

Autres manuels Avocent Changer

Avocent

Avocent DSRTM 1021 Instructions d'installation et d'entretien

Avocent

Avocent AMX5000 Manuel utilisateur

Avocent

Avocent AutoView 3050 Manuel utilisateur

Avocent

Avocent SwitchView SC100 Manuel utilisateur

Avocent

Avocent ESP Serial Hub Instructions d'installation et d'entretien

Avocent

Avocent SwitchView Manuel utilisateur

Avocent

Avocent AUTOVIEW 3008 Instructions d'installation et d'entretien

Avocent

Avocent DSR Series DSR2161 Manuel utilisateur

Avocent

Avocent ESP-2 MI Manuel utilisateur

Avocent

Avocent DSR Series DSR1010 Instructions d'installation et d'entretien

Avocent

Avocent DSR Series DSR1021 Manuel utilisateur

Avocent

Avocent SwitchView SC380 Manuel utilisateur

Avocent

Avocent DSR SWITCH - Instructions d'installation et d'entretien

Avocent

Avocent SwitchView Manuel utilisateur

Avocent

Avocent Outlook 180DX Instructions d'installation et d'entretien

Avocent

Avocent AutoView 1400 Manuel utilisateur

Avocent

Avocent DSR Series DSR2020 Instructions d'installation et d'entretien

Avocent

Avocent AutoView 2030 Manuel utilisateur

Avocent

Avocent AutoView AutoView 3200 Instructions d'installation et d'entretien

Avocent

Avocent AutoView 1000R Manuel utilisateur

Avocent

Avocent SwitchView 100 Manuel utilisateur

Avocent

Avocent DSR Series Instructions d'installation et d'entretien

Avocent

Avocent MPU1016-001 Instructions d'installation et d'entretien

Avocent

Avocent DSR Series DSR4030 Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur