Avocent AutoView 2030 Manuel utilisateur

For additional information

For further instructions on AutoView switch connection,

software setup and security configuration, please

refer to the installer/user guide included with the

switch. Check http://register.avocent.com for the

latest AutoView switch software and firmware updates.

Powering up targets and switch

Power up each target server and then power up the

AutoView switch.

The following instructions will help you

to connect your AutoView switch.

Should you require further assistance, please

consult your installer/user guide.

The Power of Being There

To connect a AutoView switch

Quick Installation Guide

AutoView®Switch

AutoView 2020 | AutoView 2030 Switches

Connecting power to the

AutoView switch

Power down all servers that will be part of your

AutoView switching system. Locate the power cord

that came with the AutoView switch. Plug one end

into the power socket on the rear of the AutoView

switch. Plug the other end into an appropriate AC

wall outlet.

Connecting the local port

Plug your VGA monitor, PS/2 or USB keyboard and

mouse cables into the appropriately labeled AutoView

switch ports.

Connecting a AVRIQ module to

the AutoView switch

Choose an available port on the rear of your AutoView

switch. Plug one end of a CAT 5 cable (4-pair, up to

10 meters) into a numbered port and plug the other

end into the RJ-45 connector of a AVRIQ module.

Connecting a server to the

AVRIQ module

Plug the AVRIQ module into the appropriate ports on

the back of the server. Repeat this procedure for all

servers that are to be connected to the AutoView switch.

Connecting network and

remote users

Plug a CAT 5 cable from your Ethernet network into the

LAN connector on the back of your AutoView switch.

Network users will gain access through this port.

Plug in the

keyboard, monitor

and mouse for your

local connection.

Server

Local Connections

Server

Connect network

and remote users.

Connect AVRIQ

modules to the

AutoView switch.

Connect servers to the

AVRIQ modules.

Power down all

servers and attach

the appropriate

power cord to the

AutoView switch.

AutoView Switch

To Contact Avocent Technical Support CALL (888) 793-8763 VISIT www.avocent.com/support DOWNLOAD www.avocent.com

Avocent, the Avocent logo, The Power of Being There and AutoView are registered trademarks of Avocent Corporation or its affiliates. All other marks are the property of their respective owners. © 2005 Avocent Corporation. All rights reserved. 590-496-001A

Power up target

servers and then the

AutoView switch.

1357

2468

91113

10 12 14

1357

2468

91113

10 12 14

Ethernet

Autres manuels pour AutoView 2030

Ce manuel convient aux modèles suivants

Autres manuels Avocent Changer

Avocent

Avocent DSR SWITCH - Instructions d'installation et d'entretien

Avocent

Avocent DSR4010 Manuel utilisateur

Avocent

Avocent 3100/3200 Instructions d'installation et d'entretien

Avocent

Avocent AutoView 2000 Manuel utilisateur

Avocent

Avocent SwitchView SC4 UAD Manuel utilisateur

Avocent

Avocent DSR DSR800 Instructions d'installation et d'entretien

Avocent

Avocent DSR SWITCH - Instructions d'installation et d'entretien

Avocent

Avocent SwitchView IP 1020 Instructions d'installation et d'entretien

Avocent

Avocent AMX5000 Manuel utilisateur

Avocent

Avocent DSR Series DSR2035 Manuel d'utilisation

Avocent

Avocent SwitchView SwitchView 1000 Manuel utilisateur

Avocent

Avocent ESP Serial Hub Instructions d'installation et d'entretien

Avocent

Avocent SWITCHVIEW OSD - Manuel d'utilisation

Avocent

Avocent AMX Switch Series Instructions d'installation et d'entretien

Avocent

Avocent ESP Multi-Interface Serial Hub SuperSerial Manuel utilisateur

Avocent

Avocent AUTOVIEW 3008 Instructions d'installation et d'entretien

Avocent

Avocent AutoView 3100 Instructions d'installation et d'entretien

Avocent

Avocent AMX Switch Series Instructions d'installation et d'entretien

Avocent

Avocent AMX5000 Manuel utilisateur

Avocent

Avocent DSR Series DSR1020 Mode d’emploi

Avocent

Avocent SwitchView SwitchView IP Manuel utilisateur

Avocent

Avocent AutoView 1400 Manuel utilisateur

Avocent

Avocent AutoView AutoView 3200 Instructions d'installation et d'entretien

Avocent

Avocent AMX5020 Instructions d'installation et d'entretien

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur