Avnet Azure Sphere Guardian-100 Manuel utilisateur

Thank you for selecting

GUARDIAN-100. Key links and

installation steps are provided

here to enable you to develop

Azure Sphere applications

that securely connect your

equipment to the internet.

STEP 1: Download Microsoft Azure Sphere SDK from:

aka.ms/AzureSphereSDK

STEP 2: Install Azure Sphere SDK on a Windows 10 computer, by

following the detailed instructions located at:

http://avnet.me/ms_sphere_docs

STEP 3: Connect the provided cables and power-up Guardian:

- Connect the Ethernet cable from Guardian to the equipment

- Connect USB cable type-A connector to the on-site equipment

- Connect USB cable type-B connector to Guardian

- Once connected, the Guardian LEDs should indicate as follows:

1, 2, 3 LEDs: Amber

Power LED : Green

STEP 4: Complete the Microsoft installation instructions to:

- Set up an Azure Sphere account (and subscribe to notiﬁcations)

- Claim your device

- Conﬁgure Wi-Fi settings of your device

STEP 5: View documentation and download

example applications for the Guardian-100 from:

http://avnet.me/mt3620-guardian

Azure Sphere

Guardian-100

P20_000

NOTE:

Included with this product is copyrighted software that is licensed

under the GPL, LGPL or other open source licenses, listed below.

You may obtain the source code for applicable software from

http://3rdpartysource.microsoft.com or by sending mail to:

Microsoft Corporation, Source Code Compliance Team

One Microsoft Way, Redmond, WA 98052

Avnet, Inc.

2211 S 47th St,

Phoenix, AZ 85034

(480) 643-2000

IMPORTANT PRODUCT INFORMATION

Before using Guardian-100, please read the Avnet Design Kit License

and Product Warranty located at

http://www.cloudconnectkits.org/policies

Use of Guardian-100 signiﬁes your and your company or organization’s

acceptance of and compliance with this License.

If you or your company or organization do not accept these License

terms, do not open the antistatic bag containing Guardian-100, or use

Guardian-100.

Lit # QSC-AES-MS-MT3620-GUARD-100-V1

FCC COMPLIANCE STATEMENTS

This product contains the AES-MS-MT3620-M-G module from Avnet

Model FCC ID IC ID

Azure Sphere MT3620 Module 2AF62-AVT3620C 21571-AVT3620C

This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including

interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the

limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference in a residential installation. This equipment

generates, uses and can radiate radio frequency energy and, if not

installed and used in accordance with the instructions, may cause

harmful interference to radio communications. However, there is no

guarantee that interference will not occur in a particular installation. If

this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and

on, the user is encouraged to try to correct the interference by one of

the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from

that to which the receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Warning: To satisfy FCC RF exposure requirements for mobile

transmitting devices, a separation distance of 20cm or more should

be maintained between the antenna of this device and persons during

operation. To ensure compliance, operations at closer distances than

this are not recommended

INDUSTRY CANADA COMPLIANCE STATEMENTS

This device complies with Industry Canada License-exempt RSS

standard(s). Operation is subject to the following two conditions:

1. this device may not cause interference, and

2. this device must accept any interference, including interference

that may cause undesired operation of the device

Le présent appareil est conforme aux CNR d’Industrie Canada

applicables aux appareils radio exempts de licence. L’exploitation est

autorisée aux deux onditions suivantes:

1. l’appareil ne doit pas produire de brouillage, et

2. l’utilisateur de l’appa-reil doit accepter tout brouillage

radioélectrique subi, meme si le brouillage est susceptible d’en

com-promettre le fonctionnement.

ISED Radiation Exposure Statement

To comply with ISED Canada RF exposure limits for general population

/ uncontrolled exposure, the antenna(s) used for this transmitter must

be installed to provide a separation distance of at least 20 cm from

all persons and must not be operating in conjunction with any other

antenna or transmitter.

Déclaration ISED d’exposition aux radiations

Pour se conformer à Industrie Canada RF limites d’exposition pour

la population générale / exposition non contrôlée, l’antenne utilisée

pour ce transmetteur doit être installée pour fournir une distance d’au

moins 20 cm de toutes les personnes et ne doit pas fonctionner en

conjonction avec toute autre antenne ou transmetteur.

Warning: Changes or modiﬁcations not expressly approved by Avnet

could void the user’s authority to operate the equipment.

Table des matières

Autres manuels Avnet Unité de contrôle

Avnet

Avnet ROHM Semiconductor Manuel utilisateur

Avnet

Avnet MSC Technologies COM Express C6C-BW Manuel utilisateur

Avnet

Avnet UltraZed-EG Manuel d'installation

Avnet

Avnet FMC-MULTI-CAM4 Manuel utilisateur

Avnet

Avnet Reach Further MT3620 Manuel utilisateur

Avnet

Avnet Qseven MSC Q7-BT Manuel utilisateur

Avnet

Avnet COM Express MSC C6B-SLH Manuel utilisateur

Avnet

Avnet PicoZed 7010 Manuel d'installation

Avnet

Avnet COM Express MSC C10M-BT Manuel utilisateur

Avnet

Avnet COM Express MSC C6B-SLH Manuel utilisateur

Avnet

Avnet COM Express MSC C6C-AL Manuel utilisateur

Avnet

Avnet Qorvo Manuel d'installation

Avnet

Avnet SMARC MSC SM2S-IMX8MINI Manuel utilisateur

Avnet

Avnet AES-ACC-U96-ONCAM-MEZ Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur