Modula SDI Digital Video
Enclosures
This Boards & Specifications section contains specific board installation
information for boards available for the following SDI Modula enclosure models:
Modula Enclosure Models
q34-40 32x32 SDI Digital Video Enclosure
q34-27 32x32 SDI Digital Video & Wideband Video Enclosure
q34-30 32x32 SDI Digital Video & Standard Video Enclosure
q34-33 32x32 SDI Digital Video & S-Video Enclosure
These enclosures primarily hold SD-SDI and HD-SDI digital video boards.
Depending on the enclosure model, other boards may also be included for
switching other video and audio signals within the enclosure. The chart on the
following page indicates which boards are available for each enclosure model.
Cabling information and specifications are found in the subsequent chapters
based on signal type.
These enclosures can hold up to 16 boards (8 input and 8 output) with 4
connectors each. This allows for a full configuration of 32x32, as well as subsets
such as 4x32, 28x12, or 16x16.
Upgrading in the Field
One of the advantages of a Modula enclosure is that boards can be added (or
replaced) in the field. To determine which boards can be added to your model,
see the chart on the following page and contact your sales representative. Boards
can only be added to their respective slots, i.e., input boards can only be added to
input slots. See the Installation & Setup section of this binder for board
installation information. If you have questions, contact your AutoPatch Dealer or
Technical Support.
Modula Boards & Specifications i
