Auto IDOL KPC Pro Manuel utilisateur
User Manual
AUTO IDOL KPC Pro
1
DECLARATIONS
Read this User Manual seriously before using the device and use this device only as
described in the manual
Pay more attentions to the key words ‘NOTE’ for appropriate operations
User should be solely responsible for the after-effects of violating any law and
regulations in local market caused by using this product or its data, and the company
Auto Idol shall not bear any legal responsibility
The company Auto Idol shall be not liable for misuse or abuse of the product, or any
unauthorized repair of the product, any consequential or incidental damage, or any
economic loss resulting from the accidents of any individual user
Try to avoid falling, shaking or dismantling the device that leads to any damage to the
internal components
Keep the main unit away from water, moisture, high or low temperature, strong magnetic
field at any time
All information including but not limited to specifications and illustrations in the manual
is based on the current configurations and functionalities available, and Auto Idol would
reserve the rights to make any change at any time without notice
Go to visit our official website: www.autoidol.net if need more information on KPC Pro
and other products
Auto Idol reserves all the rights for the final interpretations of this product
AUTO IDOL KPC Pro
2
CONTENT
1. BASIC INTRODUCTION ............................................................................................................................3
1.1 Appearance ....................................................................................................................................3
1.2 Layout ...............................................................................................................................................3
1.3 Features ...........................................................................................................................................4
1.4 Packing List .....................................................................................................................................4
2. INSTALLATION GUIDE ..............................................................................................................................5
2.1 Application Installation ...............................................................................................................5
2.2 Connection .....................................................................................................................................5
2.3 Registration ....................................................................................................................................8
2.4 Update..............................................................................................................................................9
3. FUNCTIONALITY INTRODUCTION .................................................................................................... 11
3.1 Auto Key Programming ........................................................................................................... 11
3.1.1 Vehicle Connection ..................................................................................................... 11
3.1.2 Operation Instructions for Programming Auto Key ......................................... 11
3.1.3 An example of Programming Key .......................................................................... 11
3.2 Remote Frequency Testing .................................................................................................... 17
3.3 Transponder Chip Reading .................................................................................................... 18
3.4 Transponder Chip Cloning ..................................................................................................... 19
3.5 Settings ......................................................................................................................................... 22
3.5.1 Update ............................................................................................................................. 22
3.5.2 Activate ........................................................................................................................... 22
3.5.3 System Info .................................................................................................................... 24
3.5.4 Help .................................................................................................................................. 24
AUTO IDOL KPC Pro
3
1. BASIC INTRODUCTION
Auto Idol KPC Pro is a small and smart VCI especially for Key Programming & Cloning. It
is integrated with multiple functionalities including Auto Key Programmer, Transponder
Chip Reader, Transponder Chip Cloner, Remote Frequency Tester. And more and more
functions will be continuously developed in the future.
1.1 Appearance
1.2 Layout
① ——connected to KPC Pro Cable or Adaptor Cable
② ——connected to your PAD with OTG function via OTG USB Cable
③ ——Antenna or Sniffer used to collect information
AUTO IDOL KPC Pro
4
1.3 Features
Wireless connection to PAD based on Android System by Bluetooth
Wire connection to PAD (support OTG) based on Android System OTG USB
Cable
Easy to Use Interface, Maximum Flexibility Extreme Calculation & Simplicity
Online Update
Extensive vehicle coverage up to 90% of the majority of Asian, African, American,
European market
Supported Protocols: SAE-J1850 PWM, SAE-J1850 VPW, KWP2000, ISO-9141,
CANBUS, SINGLE CAN
Input: 12V/1A
Operation temperature: -10-50℃
Dimension: 167*72*27MM
1.4 Packing List
Interface: 1PCS
KPC Pro Cable: 1PCS
Hyundai/Kia-10P Adaptor: 1PCS
Kia-20P Adaptor: 1PCS
Honda-3P Adaptor: 1PCS
DC12V Power Adaptor: 1PCS
Adaptor Cable: 1PCS
Micro OTG Cable: 1PCS
User Manual: 1PCS
AUTO IDOL KPC Pro
5
2. INSTALLATION GUIDE
Thank you for purchasing KPC Pro. The following instructions will guide you through the
installation process, registration, activation, and update of the program. The update
process is easy and would only take a few moments from start to finish.
2.1 Application Installation
Visit official website www.autoidol.net or scan QR to download KPC Pro Application,
and install it in your PAD based on Android System.
2.2 Connection
Before you start the Interface registration and update, please follow this instruction
to connect to DC 12V power and your PAD
DC 12V power connection
There are two options to provide DC 12V power supply.
Option 1: use DC 12V Power Adaptor and Adaptor Cable (shown as below)
① ——Interface;
② ——Adaptor Cable;
③ ——DC 12V Power Adaptor
If Interface is powered correctly, the LED lights for POWER and BT on the
Interface will be on.
Option 2: use KPC Pro Cable connected to OBD socket in the car (shown as below)
AUTO IDOL KPC Pro
6
① ——Interface
② ——KPC Pro Cable connected to vehicle
③ ——Vehicle
If Interface is powered correctly, the LED lights for POWER and BT on the
Interface will be on
PAD connection
There are also two options to connect Interface to your PAD.
Option 1: use Bluetooth(Default)
① ——Interface
② ——PAD
When Interface is powered correctly, click the icon KPC Pro on your PAD to start
APK.
AUTO IDOL KPC Pro
7
First, when the PAD successfully searches the Interface via Bluetooth, PAD will
pop up a message that sends a Bluetooth pairing request shown as below:
Second, please input Pairing Password: 1234
Third, click button OK. Once paired successfully, it will show as below:
AUTO IDOL KPC Pro
8
Option 2: use OTG USB cable
① ——Interface
② ——OTG USB Cable
③ ——PAD
When Interface is connected to PAD via OTG USB cable, the LED lights for
POWER and USB on the Interface will be on, as well as the light for BT will be off.
NOTE:
If you select OTG USB cable to connect the Interface to your PAD, please
ensure your PAD has to support OTG function.
2.3 Registration
When using the product at the first time, you need to register your account according
to the requirements. And please remember it that is necessary when you would deal
with issues about the product if need in the future.
NOTE:
Once successfully registered, the PAD and the Interface would be solely matched.
AUTO IDOL KPC Pro
9
2.4 Update
After successful registration, please directly update software to download all the data
from the sever for the first use via the internet using WIFI.
Table des matières
Manuels Carte mère populaires d'autres marques
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manuel utilisateur
Gigabyte
Gigabyte GA-9IVDT Manuel utilisateur
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
