ausdom ad118 Manuel utilisateur
Car DVR D as h Cam
FHD1080P
Instruction Manual
AD 118
EN 1
CONTENTS
Introduction
Package Contents
Features
Appearance
Safety Precautions
Mounting the Unit
Inserting the Memory Card
Connecting to Power
Recording/charging Indicators
Power the Unit On and Off
Power Indication
Video Recording
Taking Photos
Menu Configurations
Specifications
2
2
2
3
4
5
6
6
7
8
8
9
10
11
15
EN 2
Introduction
Thank you for purchasing the AD 118 Car DVR Dash Cam that is
designed to capture Real- Time video of any events happening when
you are driving outside. You can mount the AD 118 on your car’s
windshield with 120oWide Angle Lens for the best field of view and
record video in Full HD 1080P to ensure all the important events
during the driving are recorded clearly. The AD 118 features up to
32GB extend storage allowing you to store more flexible. Built-in fill
light provides you clearer images at night.
This manual will give you the instructions and information about the
AD 118. Please read it carefully before using the AD 118, and keep it
properly for future reference.
Package Contents
1. AD118 Car DVR Recorder *1
2.Mounting Bracket *1
3.Charging Cable *1
4.Car Charger *1
5.User Manual *1
Features
- Famous brand Car DVR with top-quality Samsung camera lens
- 120 degree wide viewing angle
- 2.0 inch HD TFT LCD display
- High temperature resistant glass lens
- Compatible with TF (high speed microSD – called an SDHC card)
memory card up to 32GB. Memory card is not included in the package.
- SOS Button. You can protect the current recording by pressing the
SOS button to instantly save the file.
- Loop recording
- Motion detection
- Seamless recording
- Auto screen saver (wake up screen by any button on panel)
- Select cycle recording time
- Low power warning and auto power off to save videos
- Auto power on and auto recording when auto engine is started
- Time-lapse power off after disconnecting with car power
- Instant mute function
- Video restore function if damaged
- File lock option
- Loop recording function
- WDR conducting balancing light automatically in the shooting process
- Built in fill light
- Built in microphone
- Built in 180 mAh rechargeable lithium battery
- Parking Monitor: Collision or shaking will trigger to start recording
- Nine on screen menu languages to choose from
Car D VR Da sh Cam
FHD10 80P
Instruction Manual
AD118
31
2
4
10 11 14
12
13
5 6 7
8
9
EN 3
Appearance
- Famous brand Car DVR with top-quality Samsung camera lens
- 120 degree wide viewing angle
- 2.0 inch HD TFT LCD display
- High temperature resistant glass lens
- Compatible with TF (high speed microSD – called an SDHC card)
memory card up to 32GB. Memory card is not included in the package.
- SOS Button. You can protect the current recording by pressing the
SOS button to instantly save the file.
- Loop recording
- Motion detection
- Seamless recording
- Auto screen saver (wake up screen by any button on panel)
- Select cycle recording time
- Low power warning and auto power off to save videos
- Auto power on and auto recording when auto engine is started
- Time-lapse power off after disconnecting with car power
- Instant mute function
- Video restore function if damaged
- File lock option
- Loop recording function
- WDR conducting balancing light automatically in the shooting process
- Built in fill light
- Built in microphone
- Built in 180 mAh rechargeable lithium battery
- Parking Monitor: Collision or shaking will trigger to start recording
- Nine on screen menu languages to choose from
Buttons and Socket:
1.Knob for lens adjust
2.HD out port
3.USB port
4.Function Button(Menu/back)
5.Function Button(playback/up)
6.Function Button(photo/down)
7.Function Button(Video/ok)
8.LCD display
9.Lens(LED light surround)
10.Power Button
11.SD card slot
12.Charge indicator
13.Recording indicator
14.Reset button
EN 4
Safety Precautions
- Do not disassemble or modify the unit by yourself. Contact the dealer for
help if the unit stops working unexpectedly.
- Do not press hard on the LCD screen that will cause the unit malfunction.
- Do not clean the unit with cleaners containing strong acid or alkaline.
- Avoid using or storing the unit in an extreme temperature environment
or exposing to sunlight directly.
- Avoid using the unit in the environment with strong magnetic wave or
excessive vibration.
- Store the unit in a dry place away from moisture.
- In order to avoid the car's lighter socket to continue supplying power
when the car's engine is turned off or idled. Unplug the unit to reduce
unnecessary power consumption and avoid any unexpected problems.
About the unit
- Only use the car charger or adapter provided with the camera to avoid
damaging the device.
- Please do not constantly plug in and remove the car charger, this can
damage the device.
- Do not touch the car charger with wet hands.
About the car charger
- Mount the unit within the range between the windshield wipers to ensure
clear visibility in a rainy day.
- Do not place the unit where obstructing the driver’s view or deployment
of airbags.
About the mounting location
EN 5
1. Clean and dry thoroughly the windshield area where you want to
mount the unit. (Picture 1)
2. Insert the mounting bracket into the mount socket located on the top
of the unit and slide sideways until the mounting bracket is mounted on
the unit firmly. (Picture 2)
3. Turn the adjustment knob anticlockwise to loosen and then adjust
the unit to a suitable angle. The lens is 120orotatable. (Picture 3)
Note:Dirty and moist glass will cause the mounting bracket can not be
firmly mounted on the windshield.
Mounting the Unit
- To preserve the integrity of all video recordings, never remove the
memory card while the camera is operating.
- To avoid the loss of any important data, it is recommended that you back
up the data on the camera memory card to a computer or other storage
device on a weekly basis.
Note:USB Cable is not included.
About backing up data
Picture 1
Windshield
Picture 2
Picture 3 Picture 4
Mount Bracket Car DVR Recorder
EN 6
1. Before starting to record, you have to insert a Class 6 or above
micro SD card with up to 32GB capacity into the slot located on the
side of the unit. (Picture 5)
4. Find the best position on the windshield to mount the unit. Peel off
the protective film from the mounting bracket’s foam sticker and move
the rotatable knob clockwise until you hear a click to ensure the unit
firmly mounted on the windshield. (Picture 4)
Note:For the best field of view, it is better to mount the unit in the middle
of the windshield near the rear-view mirror.
Note:
- Make sure the memory card has been formatted before using.
- Do not remove the memory card during recording.
- You have to insert the memory card into the camera before
connecting the camera to the power supply.
- For best results, use the format function of the car camera to prepare
your memory card.
3. To remove the memory card, push to eject memory card out of the slot.
1. Connect the small end of the power/transmission cable to the USB
connector located on the side of the unit.
2.Connect the other end of the power/transmission cable to the included
car charger. (Picture 7)
Connecting to Power
Inserting the Memory Card
Picture 5 Picture 6
2. Press button to enter Menu Configurations, press or
button to select “Format” item and press button to format
the memory card. (Picture 6)
Memory Card
EN 7
3. Plug the included car charger into the car’s lighter socket. (Refer to
Picture 8)
4. The unit will power on and start recording automatically after your
car engine is starting.
5. When the car engine is off, the unit will automatically power off after
saving the recordings.
Note:
- The unit can be recharged and connected to the car’s lighter socket,
PC or USB power supplier with the included cable. When the unit is
connected to a PC, it can only be used for transferring files. You will
not be able to use any of the unit’s features at this time.
- Only use the included car charger with 5V output to charge the unit.
Non-compliant car charger will damage the unit and cause malfunction.
The unit provides you the recording and charging indicators located on
the right top corner of the unit that specifying the unit current status.
Note: The unit will automatically power on when you connect the unit
to the power supply via charging cable for charging. Relatively, the unit
will power off automatically when you unplug the charging cable to
stop charging.
Recording/charging Indicators
Picture 7 Picture 8
Solid Red Charging
Flashing Blue Once Taking a photo
Flashing Blue Recording
Charging Indicator Status Definition
Recording Indicator Status Definition
Charging Cable
Car Charger
EN 8
1. Power On: Press the power button located on the side of the unit.
2. Power Off: Press and hold the power button located on the side of
the unit for 3 seconds.
3. Auto Power On and Off: You have to enable the “Auto Power”
feature in the menu configurations to process Auto Power On/Off
function. The unit will automatically power off if no action during the
configured time.
Note:When the device crashes, you can press the Reset button
located on the side of your unit to restore all settings to factory default
settings and reboot.
Power the Unit On and Off
The unit provides you a battery indication appeared on the bottom left
of the screen clearly so that you can understand the current battery
status. (Refer to Picture 9)
Note:
- Whether the unit is powered ON or OFF, that will not affect the charging.
- When the battery is running out of power (low power status), the unit
will show “Low Battery” warning message on the screen and power off
immediately. (Picture 10)
Power Indication
Picture 9
Full-75% 75%-25% 25%-Low Battery
Picture 10
Picture 11
EN 9
Video Recording
Normal Recording
If the Automatic Video function is enabled, in the Recording Mode, the
unit records the event and saves it automatically. Or you can press
button to manually activate emergency recording. The recorded files
are protected from being overwritten.
Automatic Video
After the car engine is starting, the unit will automatically power on and
start recording. Or you can press button to start recording and
press to stop manually.
You can configure the recording length for saving. Refer to Loop Record
for more information. After the car engine is off, the unit will automati-
cally save the current recording and power off.
Note:
- In the Recording Mode, you can press button to enable or
disable the microphone function.
- In the Recording Mode, you can press and hold button to adjust
the digital zoom.
- You can press power button once to enable the Fill Light function on
heavy weather or at night to improve the quality of photography.
Icon will show on the upper middle of screen.
Fill light(off)
Microphone(on)
Battery indication
Resolution
Start/Stop recording
Zoom in/out
Recording time
Recording
Loop recording in
2 mins length
Exposure
Memory card
SOS button
Record audio
on/off
Autres manuels pour ad118
1
Table des matières
Autres manuels ausdom Caméra embarquée
