ausdom AD109 Manuel utilisateur
HD Car DVR Camcorder
Instruction Manual
AD 109
Contents
Introduction 3
Features 3
The Function of Default Setting 4
Getting Started 4
Package Contents 6
Appearance 6
How to Install 7
Mounting the Unit 8
Connecting to Power 11
Power Indication 13
LED Indicators 14
Video Recording 14
Power the Unit On and Off 14
Normal Recording 16
Event Recording 17
Park Mode Recording 18
Video Playback 19
Taking Photos 22
EN 1
EN 2
Photos Playback 23
Menu Configurations 23
Troubleshooting 27
Specifications 28
Recording Time 29
Introduction
Thank you for purchasing the Car DVR Dash Cam AD109 that is
designed to capture Real- Time video of any events happening when you
are driving outside.
You can mount the AD109 on your car’s windshield with 180° Wide Angle
Lens and built-in HDR for the best field of view and record video to ensure
all the important events during the driving are recorded clearly.
The AD109 features up to 64G extend storage allowing you to store more
flexible. Once emergency occurring when driving, you can protect the
present file by pressing Event Recording button, avoid the file losing. If
something hit the car, the unit will power on automatically and recording
when parking. The built-in G-Sensor feature will automatically enter the
Event Recording Mode, and the unit records the event automatically. The
recorded files are protected not be overwritten.
This manual will give you the instructions and information about the AD109.
Please read it carefully before using the AD109, and keep it properly for
future reference.
- Mini size, 180 degree wide viewing angle
- Built-in microphone/speaker
- Compatible with Class 10 or above TF(SDHC) memory card up to
64GB
- 2.0” TFT display
- HD OUT
- Recycle recording
- Seamless recording
- Instant mute function
- HDR for better recording at night or in heavy whether
- Warning voltage for auto power off and save videos under 3.65V,
recharge reminder, working voltage is 3.7V.
- Auto power on and record while auto engine started
- Time-lapse power off (about 15 seconds) after disconnecting with car or
other devices power
- Video restore function if damaged
- Event recording (event video), Recycle recording (normal video) separate-
ly holding
- Built-in G-sensor
Features
EN 3
The Function of Default Setting
- Video resolution: 1920x1080 30P 16:9
- Recycle record: 3 Minutes
- Mic setup: On
- G-sensor setting: Medium
- HDR: close
- Park mode: off
- Backlight off setting: Normally on (screen will always turn on)
- Built-in lithium battery: Support 20mins recording time when battery is
full; please connect the unit to car power when you want to start a
long-time recording.
Note:
- If you can’t turn on the unit in first use, maybe the battery is low, please
connect to power, it will turn on automatically.
- If you want to change any function, please read Menu Configuration,
enter Menu Configurations main screen to set up.
Getting Started
Safety Precautions
About the Unit
- Do not disassemble or modify the unit by yourself. Contact the dealer
for help when the unit is failed to work.
- Do not press hard on the LCD screen causing the unit malfunction.
- Do not clean the unit with cleaners containing strong acid or alkaline.
- Avoid using or storing the unit in an extreme temperature environment
(-20°~75°) or exposing to sunlight directly.
- Avoid using the unit in the environment with strong magnetic wave or
excessive vibration affecting function.
- Store the unit in a dry place away from moisture.
- Avoiding dropping the unit from high places.
- In order to avoid the car's lighter socket to continue supplying power
when the car's engine is turned off or idled. Unplug the unit to reduce
unnecessary power consumption and avoid any unexpected problems.
- Do not touch the unit with wet hands for avoiding dangers.
EN 4
- Park Mode: Collision or shaking will trigger to start recording
About the Car Charger
- Only use the car charger or adapter provided by the unit to avoid
malfunction or danger.
- Please do not constantly plug in and remove the car charger for
avoiding damage.
- Do not touch the car charger with wet hands for avoiding dangers.
- For your safety, please do not set the charging cable too tight when
connecting.
About Backing up Data
- Do not place the unit where obstructing the driver’s view or deployment
of airbags for avoiding dangers.
EN 5
Store dry and away
from moisture
Avoid dropping
from high places
Avoid exposing to
extremely temperature
About the Mounting Location
- Mount the unit within the range between the windshield wipers to
ensure clear visibility on heavy weather or in a rainy day.
Within the range between the windshield wipers
- Do not remove the SD memory card during operating to avoid the file
loss or damaged.
- To avoid the loss of data caused by improper use, it is recommended to
back up the data pre-saved in SD card to a computer or other storage
device before using this unit.
EN 6
Appearance
Note:
Above pictures might be different from the actual ones.
Lens
Recording indicator
Charge indicator
2.0” TFT Display
Recording/OK
Snap/Down Lock
Playback/UP/Mute
Menu/Return
Front Back
Mount BracketAD109 Car DVR Recorder Car Charger
USB Cable Charging Cable Instruction Manual
Package Contents
EN 7
usbRESETHD out
USB Connector
Reset Button
Power On/Off Button
Micro SD Slot
HD OUT Connector
How to Install
Inserting the Memory Card
1. Before starting to record, you have to insert a Class 10 or above micro
SD card with up to 64GB capacity into the slot located on the side of the
unit.
Mount Socket
Memory Card
Top Bottom
Built-in MIC / Speaker
Micro SD Slot
AD109 Car DVR Recorder
2. Press button to enter Menu Configurations, press or .
button to select Format and press button to format the memory card.
EN 8
Mounting the Unit
1. Clean and dry thoroughly the windshield area where you want to mount
the unit.
Note:
Dirty and moist glass will cause the mounting bracket can not be firmly
mounted on the windshield.
3. To remove the memory card, push to eject memory card out of the slot.
Note:
- Make sure the memory card has been formatted before the initial using.
- Do not remove the memory card during recording. The unit will auto
power off after you removing the memory card, please press power on/off
button to turn on.
- When operating in the Recording Mode, press to stop recording.
- You have to insert a memory card into the unit firstly before connecting
the unit to the power supply.
- To avoid the loss of data caused by improper use, it is recommended to
back up the data pre-saved in SD card to a computer or other storage
device before formatting.
Windshield
FCWS/LDWS calibration
Card volum
Driving time warning
Format
EN 9
3. Turn the adjustment knob anticlockwise to loosen and then adjust the
unit to a suitable angle. Then turn the knob clockwise to tighten the
adjustment knob.
4. The mount bracket can be rotated up to 360°. Turn the rotation tray to
appropriate angle for the best of view.
Mount Bracket
Loosen
Mount Socket
Mount Bracket
AD109 Car DVR Recorder
Tighten
Adjust the unit to a suitable angle
Adjustment Knob
360°Rotation
Rotation Tray
Mount Bracket Mount Bracket
2. Insert the mounting bracket into the mount socket located on the back
top of the unit and slide sideways until the mounting bracket is mounted
on the unit firmly.
Table des matières
Autres manuels ausdom Caméra embarquée
