Aurora Multimedia TVP-500F Manuel utilisateur

Pioneer TV/FM Tuner card with Dual HDMI

TVP-500F

Installation Manual

Manual# 050523

Model: TVP-500F

205 Commercial Court

Morganville, NJ 07751

www.auroramultimedia.com

TVP-500F Installation Manual

TABLE OF CONTENT

1INTRODUCTION .................................................................................................................................2

2ACCESSORIES.....................................................................................................................................2

3QUICK START GUIDE .......................................................................................................................3

4PIONEER DISPLAY SETTINGS........................................................................................................3

5CONNECTIONS ...................................................................................................................................4

5.1 A/V CONNECTORS ............................................................................................................................4

5.2 RF CONNECTOR ................................................................................................................................4

6SUPPORTED IR TRANSMITTER(S) AND BASIC KEY FUNCTIONS .......................................5

7OPERATING THE TVP-500F.............................................................................................................7

7.1 REMOTE CONTROL FUNCTIONS ........................................................................................................7

7.2 MENU STRUCTURE ...........................................................................................................................8

7.3 MAIN MENU:....................................................................................................................................8

7.4 GENERAL SETTINGS .........................................................................................................................9

7.5 VIDEO SETTINGS ..............................................................................................................................9

7.6 AUDIO SETTINGS ............................................................................................................................10

7.7 TUNER SETTINGS (NORTH AMERICA).............................................................................................10

7.8 TUNER SETTINGS (INTERNATIONAL) ..............................................................................................12

7.9 FM RADIO SETTINGS......................................................................................................................14

7.10 CC SETTINGS .................................................................................................................................15

7.11 V-CHIP SETTINGS...........................................................................................................................15

8TROUBLESHOOTING......................................................................................................................16

9FIRMWARE AND STARTUP PICTURE UPDATE.......................................................................17

10 RS-232 PROTOCOL.......................................................................................................................18

11 SPECIFICATIONS .........................................................................................................................21

11.1 APPLICABLE SIGNALS .....................................................................................................................21

11.2 CONNECTION TERMINALS ...............................................................................................................21

11.3 DIMENSIONS...................................................................................................................................21

11.4 WEIGHT..........................................................................................................................................21

12 LIMITED LIFETIME WARRANTY............................................................................................22

13 FCC PART 15 STATEMENT ........................................................................................................23

TVP-500F Installation Manual

1 Introduction

The TVP-500F is a high quality TV Tuner/Scaler with dual HDMI. It supports advanced

functionality, like video format /scan rate conversions, audio effects, Closed Caption decoding, V-Chip,

Sleep Timer, and more. In addition the TVP-500F has a FM tuner with RDS capability and station

information which is displayed on the plasma. The TVP-500F also expands on the displays capabilities

with its own internal menu systems and advanced features.

2 Accessories

The accessories supplied are:

-IR Remote (IRC-10)

All supplied components are shown on the picture below:

TVP-500F Installation Manual

3 Quick Start Guide

1. Make sure the Pioneer Display is off (no LED) and disconnected from the power.

2. Remove the blank plate covering the expansion slot or if an existing card is present, it must be

removed from the slot.

3. Carefully insert the card into the slot and tighten the spring loaded screws.

4. Connect the appropriate video sources to input connectors of TVP-500F (see “Connections” on

page 4 for details).

5. Connect the power source to the display (refer to Operating Instructions of the Display).

6. Turn on the display with the power button on the display remote.

Warning: Please keep in mind static images can lead to image burn in on some displays. Never leave a

still image on a phosphor based screen for long periods of time unless the intensity of the display is

turned down. Refer to your operations manual for you display device to assure proper functionality.

4 Pioneer Display Settings

Initial settings on the first use of TVP-500F:

Main Menu ÆSet Up:

- Color Decoding: RGB

- Clamp position: Locked

- Signal Format: 525P

Note: Inputs 3 and 4 have Color Decoding only.

Integrator Menu ÆOption:

- Baud Rate: 9600

To get into Integrator Menu, press and hold Display key on the display remote for approximately

5 seconds. Then press Menu key on the display remote. This will bring up the Integrator Menu.

It may be necessary to adjust picture size and position for best picture alignment using Screen adjustment

from the display Menu and from Video Position on TVP-500F Menu (page 9).

Plasma Displays often "overscan" the image slightly; in some cases when displaying a channel, there

may be a narrow black bar on the left/right or top/bottom of the screen. Use the utilities mentioned above

to “overscan” the picture as necessary to ensure that picture is filled the entire screen for all channels

and signal inputs.

TVP-500F Installation Manual

5 Connections

5.1 A/V connectors

•Composite Video input

•S Video input

•RGB/YPbPr input

•2 HDMI inputs

•Audio inputs for Video, S Video, and RGB/YPbPr

Example of interconnections for a display device, TVP-500F, DVD/VCR (or other source of video),

and TV antenna or cable is shown below. Note that standard RCA cables for audio and video connections,

standard S-Video cable, or RF antenna cables are not supplied with the TVP-500F.

5.2 RF connector

The coaxial connector (ANT) of TVP-500F is RF signal input – either aerial or cable TV, UHF/VHF,

if the TVP-500F shall be used as TV tuner. The other is for FM antenna reception.

TVP-500F Installation Manual

6 Supported IR transmitter(s) and basic key functions

The TVP-500F is controlled using an IR remote controller. It utilizes IR receiver of the display via

the built in IR sensor of the display.

The TVP-500F unit is compatible with the Aurora IRC-10 remote transmitter(s) below (see Fig.1).

IRC-10

SELECT

PO WER

MUT E

VOL

P1 P2 P3

P4 P6

P9P8

P1 2

P10

LA S T

P11

Presets

SET

CC/TT EDS SLEEP

TV FM

MENU INFO

VIDEO

SVIDEO

RGB/YPbPr

Plasma

TV P

Fig. 1

For details of the TVP-500F operation refer to the corresponding chapter of this document. Below is

a brief description of the remote transmitter and the keys used for control of the TVP-500F.

TVP-500F Installation Manual

IR Remote Function

TVP Selects to control the TVP-500F functions

PLASMA Selects to control functions specific to the plasma

POWER Toggles Power on/off

CC/TT Enables/Disables Closed Captioning or Teletext (if available)

EDS Enables/Disables Extended Data Service (if available)

SLEEP Sets Sleep Timer

TV INPUT Selects TV Antenna as source

FM INPUT Selects FM Antenna as source

VIDEO INPUT Selects Composite Video as source

S-VIDEO INPUT Selects S-Video as source

RGB/YPbPr INPUT Selects RGB or YPbPr as source

CHANNEL+/- Changes TV channel or FM frequency up/down

VOLUME +/- Adjusts volume level up/down

MUTE Toggles the volume mute on/off

ARROWS Moves the cursor up/down, selects or changes contents when Menu

is active.

MENU Displays the menu and exists from the menus

SELECT Selects option in menu

Sets contents or changes in dialog panels

INFO Displays current channel, input and output formats

SET Pressing this and one of the Preset buttons within 1.5 seconds will

store the current channel (TV) or station (FM)

LAST Return to the last saved channel

PRESET KEYS P1 – P12: Selects the stored preset for TV or FM

P1 – Also used as Red for Teletext

P4 – Also used as Green for Teletext

P7 – Also used as Yellow for Teletext

P10 – Also used as Blue for Teletext

0..9, DIGITS Directly enters channel number (TV) or FM frequency (FM) to switch

to. It is also used to enter the page numbers for Teletext.

TVP-500F Installation Manual

7 Operating the TVP-500F

Input Select:

Inputs 3, 4, and 5 of the display are reserved for TVP-500F if this card is installed. Below are

signal assignments for each input:

- Input 3: HDMI A

- Input 4: HDMI B

- Input 5: TV/FM, Composite Video, S Video, and RGBHV / YPbPr.

Both Pioneer and Aurora remotes (IRC-10) can be used to switch inputs.

Switching input using Pioneer remote:

-Press number 3 or 4 to switch to HDMI A or HDMI B respectively.

-Press number 5 to switch to TV/FM, Video, S Video, or RGB/YPbPr.

Switching inputs using Aurora remote:

-Press Plasma, then 3 or 4 to switch to HDMI A or HDMI B respectively.

-Press Plasma, then 5 to switch to TV/FM, Video, S Video, or RGB/YPbPr.

Since input 5 of the display is used to display different input signals from TVP-500F, these input signals

(Video, S Video, and RGB/YPbPr) can be selected using Aurora remote (the green buttons). Switching

between TV and FM can be done by using TV and FM buttons. Make certain to press TVP button first

to control the TVP-500F functions.

Note: RGB and YPbPr inputs share the same connection (VGA) and only one source can be connected

at a time. Pressing RGB / YPbPr button will toggle between RGB and YPbPr inputs. The last input

signal will be saved when changing to a different input and when this button is pressed again, the last

saved input will be selected.

7.1 Remote Control Functions

When no menu is active, usual keys of IR transmitter can be utilized to change volume level and switch

channels. These control keys are:

Key: Volume+/- (”VOL”)

Adjusts the plasmas volume up and down when plasma mode is selected on the top of the remote.

Key: Channel +/- (“CH”)

Changes TV channel (TV mode) or change FM frequency (FM mode). Number and label (if was defined)

of the new channel or FM station is shown at top of screen for 5 seconds.

TVP-500F Installation Manual

Keys: 0-9

Dialog: “SWITCH TO” or “NEW FM FREQUENCY” – enter new channel number or FM frequency,

several digits can be entered if necessary. Channel or FM frequency is switched to after a 3 seconds

timeout (since the most recent digit is entered) or after pressing Select button.

Key: Menu

Display the main menu. See the Menu Structure chapter.

Key: Select

Enter selections for the menu.

Key: Power

Switch plasma power on or off when the plasma mode on top of the remote is selected.

7.2 Menu Structure

The menu structure allows controllability of various aspects of TVP-500F configuration.

For all menus, Up/Down arrows move the cursor (yellow “selection” highlight) up/down. Select

button will select the current submenu/option and finishes text entry (passwords, channel labels, etc.).

Left/right arrows change the currently active option, if possible.

When in “text edit” dialog (e.g., channel label editing), left/right arrows move the cursor left/right,

up/down arrows change the character at the cursor.

7.3 Main Menu:

The Main Menu displays all sub-menus that will be discussed in more detail in the subsequent

chapters.

Note: when existing from the Main Menu, a 3 to 5 seconds delay is needed before the next IR

command (from the remote) is sent out.

TVP-500F Installation Manual

7.4 General Settings

This menu allows control of various “general” aspects of TVP-500F behavior.

A/V Input – Selects input signals for input 5 of the plasma.

Current time – Sets the current time.

Timer On – Sets the turn on time of the plasma and allows it to be enabled and disabled.

Timer Off – Sets the turn off time of the plasma and allows it to be enabled and disabled.

Sleep timer – Sets sleep timer.

7.5 Video Settings

Brightness -- Adjusts the brightness of the picture.

Contrast -- Adjusts the contrast of the picture.

Color -- Adjusts color saturation (0 corresponds to grayscale picture).

Startup Logo -- Enables/Disables “logo” picture display after TVP-500F is on.

Timer Logo -- Sets time (in seconds) for which the logo will be displayed after the TVP-500 is

on.

Video Position -- Opens the “Video position” submenu, allowing control of picture size and

position on screen.

Table des matières

Autres manuels Aurora Multimedia Tuner TV

Aurora Multimedia

Aurora Multimedia VR-1FF Manuel utilisateur

Aurora Multimedia

Aurora Multimedia TV/FM Tuner Manuel utilisateur

Aurora Multimedia

Aurora Multimedia VTune Pro Manuel utilisateur

Aurora Multimedia

Aurora Multimedia TV/ FM Tuner V Tune Pro Manuel utilisateur

Aurora Multimedia

Aurora Multimedia ICS-SP20 Manuel utilisateur

Aurora Multimedia

Aurora Multimedia VPH-100 Manuel utilisateur

Manuels Tuner TV populaires d'autres marques

KWorld

KWorld PE310SE Manuel utilisateur

COMPRO

COMPRO M505 - STARTUP Manuel utilisateur

Genius

Genius TVGo DVB-T31 Manuel utilisateur

Zinwell

Zinwell ZAT-332 Manuel utilisateur

RGBlink

RGBlink TAO 1mini-HN Manuel utilisateur

TViX

TViX PVR R-2200 Manuel utilisateur

Xavix

Xavix Xavixport Manuel utilisateur

Peak

Peak NET-TV Manuel utilisateur

Fracarro

Fracarro SAF-HD 10 Manuel utilisateur

Eonon

Eonon E0770 Manuel utilisateur

Hauppauge

Hauppauge WinTV-NOVA-T-Stick Manuel utilisateur

Digital Devices

Digital Devices Octopus Net Manuel utilisateur

Gericom

Gericom USB 2.0 DVB-T Tuner Manuel utilisateur

ADS Technologies

ADS Technologies PTV-334 Manuel utilisateur

Manta

Manta DVBT013T2 Manuel utilisateur

Kenwood

Kenwood KTC-D500E Manuel utilisateur

AVIWEST

AVIWEST DMNG PRO 100 Manuel utilisateur

Abode

Abode IP Streaming Camera Manuel utilisateur