Aunex AMX Series Manuel utilisateur

AMX Series Ampliers

Mini IPX Class D Digital Amplier Series

Models: AMX600.2D, AMX800.4D, AMX900.6D

Installation and Operation Manual

Please take time to thoroughly read through this manual to familiarize yourself with your new amplier.

This will ensure that your amplier will perform at its optimum capabilities.

Para obtener una copia de este manual en español, visite www.aunexusa.com y luego vaya a la página

del producto que necesita. Haga clic en la pestaña Soporte y descargue su manual en español.

AMX900.6D

FULL RANGE DIGITAL

Congratulations and thank you for purchasing an Aunex AMX Series

Amplier. This product has been engineered and manufactured

utilizing precision quality parts and craftsmanship. Improvements

in sound quality and system performance will be greatly enhanced

with the use of this amplier.

To ensure maximum performance we highly recommend you have

your new Aunex product installed by an Authorized Aunex Dealer.

Should you decide to install this product yourself, please make

sure to read this manual thoroughly to familiarize yourself with

the necessary installation requirements and tuning procedures.

Please read your warranty and retain a copy of your purchase

receipt and original carton should your equalizer ever needs

to be serviced and warranted.

Visit our website for the latest information on all Aunex products

at: www.aunexusa.com. If you have any questions regarding

this product, please contact your Authorized Aunex Dealer for

assistance or call / email Aunex Technical Support Department at

(909) 589-5010 / [email protected].

Caution: Continuous exposure to sound pressure levels over 100dB

may cause permanent hearing loss. High powered audio systems can

produce sound pressure levels that can exceed over 150dB. Please limit

your exposure to continuous high listening volumes.

General Feature Set of the AMX Series Ampliers

• Heavy Density Aluminum Extruded Heatsink

• IPX67 Element Ready

• Die Cast End Cap with Tone Control Access Panel

• 4 Layer PCB, SMD Technology

• Conformal Coated PCB

• Dierential Balanced RCA Inputs

• Fully Variable Crossover 12dB/Octave Slope

• Output Clipping Indicators

• Autosensing in High Level Input Mode

o Remote Input Becomes Remote Output Trigger if High

level Input is used.

• Power and Protection Logo Illuminated Status Indicator

o Blue Indicates Amplier is powered On

o Red Indicates the Amplier is in Protection

• Pigtails Power & Ground Connectors

• Pigtails Low Level RCA Input Connectors

• Pigtails Speaker Outputs Connectors

• Pigtail 3.5mm Auxiliary Input

• Advance Protection Circuit Monitoring: Short, Thermal, Overload

and Impedance

• Finish: Anodized with Brush Finish

AMX600.2D Feature Specic

• Dual Boost Circuitry Active in HP and LP Modes 0 – 18dB

• Pigtails Low Level RCA Output Connectors

AMX800.4D Feature Specic

• Input Mode Selector (2Ch. or 4Ch.)

• Pigtails Low Level RCA Output Connectors

AMX900.6D Feature Specic

• Input Mode Selector (2Ch. or 6Ch.)

What’s Included

• (1) AMX Series Mini Amplier

• (1) In-Line Fuse Holder with Mini ANL Fuse

o AMX600.2D is supplied with a 60A Fuse

o AMX800.4D is supplied with a 80A Fuse

o AMX900.6D is supplied with a 100A Fuse

• RCA Input Connectors

o (1) Pair on the AMX600.2D

o (2) Pairs on the AMX800.4D

o (3) Pairs on the AMX900.6D

• RCA Output Connectors

o (1) Pair on the AMX600.2D & AMX800.4D

• (1) Speaker Output Connector

• (4) Self Tapping Screws and (4) Washers

• (1) Instruction Manual

• (1) Sticker

Important Safety Considerations

• To prevent personal injury and damage to the unit, please read

the follow the instructions in this manual.

• This product is designed to use in vehicles with 12Volt,

negative-ground electrical systems.

• Install this product in a dry location away from your vehicles’

safety equipment (airbags, seat belt system, etc.). Water and

humidity may damage internal components.

• Use the included mounting accessories to secure this product

so that it does not come loose.

• Check before drilling to make sure you do not drill into any vital

vehicle system.

• Protect all system wiring from sharp metal edges.

• Do not disassemble or modify this unit; doing so will void your

manufacturer’s warranty.

Important Installation Precautions

Installation of mobile audio equipment requires experience.

Although this manual provides general installation procedures,

it will not show the exact installation method for your particular

vehicle.

If you do not have the required knowledge and experience,

we recommend that you have your equipment installed by an

Authorized Aunex Dealer.

• Turn o all stereo and other electrical devices before you begin.

• Disconnect the negative (-) lead from your vehicle’s battery to

avoid an electrical short. Reconnect the negative lead to your

battery once your installation is complete. So, in other words

the negative lead from our vehicle’s battery is the rst

connection you remove before starting your installation and

the last connect your make after you nish your installation.

• Check your mounting location to make sure there is sucient

room for your installation placement preference.

• Install this product in a dry location away from your vehicles’

safety equipment. Each AMX Series amplier circuit board

has been coated with a protective layer of Conformal

Coating. This will help protect the electronic circuit from harsh

environments that may contain humidity and a range of

airborne contaminants and varying temperatures. In addition,

each AMX Series amplier has a Tone Control Access panel

which will prevent water from entering the amplier circuit board.

However prolonged exposure to extreme water and high

humidity may damage internal components in time so keeping

the amplier dry and installed in a well-ventilated area will help

ensure many years of listening enjoyment.

• When running power cables through sheet metal it is best to use

grommets and loom to properly insulate your cables from metal

edges.

• Avoid mounting the amplier with the top ns facing down as

this may increase the operating temperature of your amplier.

• If mounting underneath a seat, make sure that there is at least

1 inch (25mm) of space above the amplier to permit proper

cooling.

• Avoid mounting the ampliers on a subwoofer enclosure as

prolonged excessive vibration may damage your amplier.

Mounting Placement

Choose a structurally sound location to mount your Aunex

amplier, making sure there are no items behind the area where

the screws will be driven.

For optimum sound quality, it is highly recommended that you

purchase Aunex wiring accessories as they are designed to give

your ampliers high-quality signal it needs to operate at peak

performance levels. Aunex provides a wide selection from

RCA cables and power wire to speaker wire and battery

connectors.

In order to access the tone controls on your AMX amplier,

you will rst need to loosen the screws from the metal Access

Panel, then you will need to push aside the rubber gasket. Once all

adjustments have been made, place the rubber gasket back in

place and realign the metal access panel. Then, tighten back all

screws hand-tight.

Side Panel Layout

AMX600.2D

Input Gain

MinMax

Filter Freq.

40Hz 400Hz

Clip

Aux

Input

Preouts

Inputs

X-Over Filter

HPFullLP

Boost Eq.

0dB 18dB

Speaker Outputs

Bridge

Ch.1 Ch.2

+12V Remote Ground

AMX800.4D

Input Gain

Min Max

Input Gain

Min Max

Filter Freq.

40Hz 400Hz

Filter Freq.

40Hz 400Hz

Clip Clip

Aux

Input

Preouts

Inputs

X-Over Filter

LPFullHP

X-Over Filter

HPFullLP

2 Ch. 4 Ch.

Input Mode

Ch.3 & Ch.4 Ch.1 & Ch.2

+12V Remote Ground

BridgeBridge

Ch.1 Ch.2Ch.3 Ch.4

Speaker Outputs

Side Panel Layout Continued

3 4 5 6 7 8

AMX800.4D

AMX600.2D

1 1

62 2 73

3 8

Side Panel Layout Continued

AMX900.6D

Input Gain

MinMax

Input Gain

MinMax

Ch.1 & Ch.2Ch.3 & Ch.4

Ch.5 & Ch.6

Filter Freq.

40Hz 400Hz

Filter Freq.

40Hz 400Hz

Clip

Aux

Input Inputs

X-Over Filter

HPFullLP

X-Over Filter

HPFullLP

2 Ch. 6 Ch.

Input Mode

+12V Remote Ground

BridgeBridgeBridge

Ch.1

Ch.2

Ch.3

Ch.4

Ch.5

Ch.6

Speaker Outputs

AMX900.6D

9 10 11 12

5 215 13

18 126 23 3

1. Input Gain: Use these Input Gain Potentiometers to match the

output voltage of your headunit / source unit to the input circuit

of your amplier. These Input Gains are not a volume knob. A

simple method of setting your Input Gains is to turn your

headunit / source unit up to approximately ¾ volume. Then

slowly adjust your Input Gains on your ampliers clockwise until

you can hear distortion from your speakers or subwoofers. Then

turn the gains down (counterclockwise) till the distortion is no

longer heard and your clipping indicators are not lit.

2. Crossover Filter Selector: Depending on how you will use your

AMX Amplier, you will select the appropriate setting on the

Crossover Switch. Set the Crossover Switch to LP mode if you

are using Subwoofers or MidBass drivers. Set the switch to HP

if you want the amplier’s internal crossover to serve as a high

pass lter. When the switch is set to the Full position will allow

the amplier to send its full bandwidth to your speakers. Avoid

changing the crossover switches with the audio system

playing at high volumes as this may damage your speakers.

3. Filter Frequency Filter: This potentiometer is used to adjust the

crossover frequency from 40Hz – 400Hz in both HP Mode (High

Pass) and LP Mode (Low Pass).

4. Boost Eq: The AMX600.2 amplier incorporates a two stage

Boost Eq. circuit that is not only active in Low Pass Mode but is

also active in High Pass Mode. In Low Pass Mode, the Boost

Eq. can increase output 0-18dB centered at 45Hz. In High Pass

Mode, the Boost Eq can increase output 0-18dB centered at

12kHz. (The AMX800.4D and AMX900.6D do not

incorporate this Boost Eq. feature.)

Note if you turn up the Boost Eq, you will need to readjust

the Input Gains to avoid clipping the output signal. Using the

Clipping LED’s will help set your Boost Eq and Input Gains

properly.

Side Panel Layout Continued

5. Clipping Led Indicators: These LED’s will light up when the

amplier output signal is being clipped. When the LED’s starts

to glow, your amplier output is between 1-2% THD (Total

Harmonic Distortion). When the clipping indicators are fully lit,

your amplier output is between 6-7% THD (Total Harmonic

Distortion). The ideal gain setting is where the clip indicators are

not lit allowing the amplier to send undistorted clean output.

Setting the ampliers gains improperly where the clip indicators

are always lit will over-work the amplier and may cause

excessive heat building and possibly product failure.

6. Aux Input: This 3.5mm Auxiliary Input can be used to send

audio signal from your phone or portable music player directly to

the amplier. Note that both your Low-Level RCA Input and

Auxiliary Input are both capable of accepting audio signal

simultaneously, so to prevent cross talk on both signals, it is best

to turn o one source if both are connected to your amplier.

7. Low Level RCA Preouts: This pair of RCAs Preouts

can be used to send audio signal from your amplier to

another amplier without the need of using RCA Splitter Y-Cables.

(The AMX900.6D does not have RCA preouts)

8. Low Level RCA Inputs: These are your dierential balanced

inputs that are used to connect audio signal from your headunit

/ source unit to your amplier. Your AMX Series Amplier is

capable to receiving either High Level Speaker Outputs or

Low-Level RCA cables. If you are using High Level Speaker

outputs, you may need a high to low level adapter such as the

Aunex AP-SL2 adapter. For your convenience these RCA Inputs

are removeable.

Side Panel Layout Continued

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Aunex Amplificateur

Aunex

Aunex AC Series Manuel utilisateur

Aunex

Aunex AP Series Manuel utilisateur

Aunex

Aunex AP Series Manuel utilisateur

Aunex

Aunex AC 5 Series Manuel utilisateur

Aunex

Aunex AC Series Manuel utilisateur

Aunex

Aunex AM Series Manuel utilisateur

Manuels Amplificateur populaires d'autres marques

ASTRO

ASTRO HVO V40 P Manuel utilisateur

Marantz

Marantz SUPERSCOPE BLA-545 Instructions de montage

NAD

NAD CI980 Manuel utilisateur

Technics

Technics SE-CH770 Manuel utilisateur

Harman Kardon

Harman Kardon HK6300 Manuel utilisateur

NAD

NAD T975 Manuel utilisateur

McIntosh

McIntosh MA6850 Manuel utilisateur

Electro-Harmonix

Electro-Harmonix ENGLISH MUFF’N Manuel utilisateur

Viatron

Viatron Autrix Manuel utilisateur

GME

GME GA9800 Manuel utilisateur

Atlas

Atlas CP700 Manuel utilisateur

Roland

Roland KC-1000 Manuel utilisateur

Pyle

Pyle PFMRA350BW Manuel utilisateur

Advantage

Advantage S-250 Manuel utilisateur

IRT Electronics

IRT Electronics DVA-3007 Manuel utilisateur

Dimavery

Dimavery BA-100 Series Manuel utilisateur

Sony

Sony XM-S400D Manuel utilisateur

Schertler

Schertler ROY X Manuel utilisateur