AUDIOLINE SENSOR 500 Manuel utilisateur
SENSOR 500
Dedicated Network services telephone
User guide
DORO AUDIOLINE
1
The SENSOR 500 is a dedicated network services telephone which is compatible
with Caller display and Call Minder services. In addition it is also
pre-programmed for access to other optional services.
Up to 10 speed dial memories and a 20 name and number phonebook add to its
versatility.
Other features include: headset socket, on-hook dialling, Least Cost Routing
option and a choice of 12 languages for the display texts.
Note: Caller display, call minder and other optional services are usually
subscription services. Contact your network operator for full details.
The equipment has been approved in accordance with Council Decision 98/303/EC for
pan-European single terminal connection to the Public Switched Telephone Network
(PSTN). However, due to differences between the individual PSTN’s provided in the
different countries, the approval does not, of itself, give an unconditional assurance of
successful operation on every PSTN network termination point.
In the event of problems, you should contact your equipment supplier in the first
instance.
Compatible countries: UK, Sweden, Switzerland, Norway, Denmark, Finland.
Caller display, call minder and pre-programmed keys will only work in the country of
origin.
2
SENSOR 500 CONTENTS
SENSOR 500
Installation ...............3Caller display ..............9
Location of controls .........3New numbers ................9
Batteries ...................4Reviewing the call list .........10
Connection ................4List information ..............10
Wall mounting ..............5Erase phone number(s) ........11
Headset ...................5If the call list is full ...........11
Select language .............5Dialling from the call list ......11
Display ....................6
Set date and time ............6Speed dial memories ........12
Using the telephone .......7Phonebook ...............1 3
Making a call ..............7Store .......................14
Last number redial ...........8Erase ......................14
Volume control .............8Dial .......................14
Mute ......................8
Pause .....................8Least cost routing ..........15
..........................Programming ................16
Telephone ringer ............8Making a call ................16
Additional Network services ...8Examples ...................17
Call Answering ............18
Re-program .................19
Miscellaneous .............20
Trouble shooting .............20
Guarantee ...................21
3
INSTALLATION SENSOR 500
LOCATION OF CONTROLS
1Handset 14 Erase key
2Curly cord socket 15 Scroll call list/phonebook, save
3Wall mounting hook 16 Speed-dial/pre-programmed keys
4Hook switch 17 Volume control for handset
5Dial-Up key 18 Volume control for speaker
6Scroll call list/phonebook, replay 19 Mute key
7Line cord socket (rear) 20 Key/indicator for speaker/headset
8Display 21 Dial keys 0-9, *, #
9LED Indicator 22 Programming key
10 Play/Pause messages 23 Redial key
11 Headset socket (rear) 24 Recall key
12 Switch between speaker/headset 25 Phonebook access
13 Switch for ringer level
4
BATTERIES
Four AAA 1.5V batteries (not supplied) are required for the phonebook memory
and caller display list. When the batteries are low, the low battery indicator will be
present on the display.
PDisconnect the telephone from the telephone network.
PRemove the screw from the battery compartment lid (on the base of the telephone)
and insert the batteries, observing correct polarity.
PReplace the battery compartment lid and screw.
CONNECTION TO THE TELEPHONE NETWORK
PConnect the curly cord to the left hand side of the telephone and to the bottom of the
handset.
PConnect the telephone line cord to the socket entitled "LINE" on the rear of the
telephone and then connect the cord to the network wall outlet. The display will
show: NO CALLS.
Headset socket Line cord socket
To connect a headset, see page 4.
Do not place the unit in direct sunlight or in an area of high humidity.
In very rare situations the rubber feet on the base of the telephone may discolour a
surface.
It is recommended that you disconnect the base unit from the mains power during a
thunderstorm.
Do not use in the rain, near a bath or with wet hands.
To clean the product, use a damp cloth or antistatic wipe. Never spray cleaning fluid
directly onto the handset or base unit.
5
WALL MOUNTING
The phone can be wall mounted, using the bracket supplied.
Use the bracket supplied to mark the position of screw holes on a wall. Drill the holes
(check for hidden pipes, etc). Use the raw plug and screws provided, ensuring
approximately 3 mm remain between the wall and the head of the screw. Connect the
bracketto the rear of the base unit and place the complete assembly above the screws
and gently push it down onto the screws. Rotate the handset hanger hook 180 degrees.
HEADSET CONNECTION
Aheadset can be connected to the socket located on the rear of the telephone.
1. Connect headset to
headset socket at rear of the phone. Headset socket
2. Select headset position, using the switch on the right hand side of the telephone.
On-hook dialling:
Headset:
NOTE!
We recommend you to use a compatible headset.
Compatible headsets can be ordered via the Consumer Support department on
01527 584377.
SELECT LANGUAGE
Twelve languages are available for the display texts: English, Swedish, Finnish,
Danish, Norwegian, German, Spanish, Dutch, Portuguese, Turkish, Italian and
French.
1.Press down until the display shows "LANGUAGE", then release.
2.Press and release .
3.Select a language, using or .
4.Press and release to store the setting.
6
DISPLAY
When the unit is in standby mode the display will show: the current date and time, if new
callshave been received (if these have not been reviewed or answered) and the total
number of calls on the call list.
The display will also indicate if the batteries are low and require changing.
Text information
numbers
Low battery
New No./ Time Date
calls Position
SET DATE AND TIME
The current date and time will be set automatically once a call is received. However,
if you want to set these values yourself, follow the procedure below:
PPress and hold until the display shows "LANGUAGE", then release.
PPress and release , the display shows "SET TIME".
PPress and release .
PThe hour is now flashing on the display. Adjust with or .
Press C to store the setting and continue.
PThe minute is now flashing on the display. Adjust with or .
Press Cto store the setting and continue.
PThe day is now flashing on the display. Adjust with or .
Press C to store the setting and continue.
PThe month is now flashing on the display. Adjust with or .
Press to store the setting and return to stand-by mode.
7
SENSOR 500 USING THE TELEPHONE
MAKING A CALL
Acall can be made in several different ways, using the handset, on-hook dialling or
headset
USING the HANDSET
1. Lift the handset and wait for a dial tone.
2. Dial the phone number required.
PTo terminate the call replace the handset.
You can change to headset operation during a call by pressing and replacing the
handset.
Note: Ensure the switch on the right hand side is set to the desired function
headset/speaker.
USING the ON-HOOK DIALLING
1. Ensure that the switch on the right hand side of the phone is set to: .
2. Press and release . Use the volume control on the right hand side to adjust the
sound level.
3. Dial the number required.
4. When the called party answers, lift the handset.
PIf there is no reply, press and release the speaker key.
USING a HEADSET
1. Ensure that the switch on the right hand side of the phone is set to: .
2. Press and release . The dial tone is heard in the headset.
3. Dial the number required.
PPress and release to terminate the call.
8
LAST NUMBER REDIAL
If the last number dialled was engaged or the call was not answered, it is possible to
redial the number using the button.
PPress and release . The telephone number will be dialled automatically.
PWhen the called party answers, lift the handset (or headset) to converse.
If the call is not answered, press and release
It is also possible to lift the handset and then press the redial key.
VOLUME CONTROL
The sound volume in the handset or headset can be adjusted using the [VOL ] to
increase the volume, and [VOL ] to decrease the volume.
MUTE
If during a telephone conversation, you wish to talk privately to a third party without the
caller overhearing: Press the button (the words MUTE will appear on the display).
To resume the conversation, press the button again.
PAUSE
Ashort pause be added to phone numbers stored in the phonebook and the speed-dial
memories, using this button. This may be required if the phone is connected to a
PABX or if used with some network services.
TELEPHONE RINGER
The telephone ringer volume can be set to either high, low or off which is represented
by this symbol
ADDITIONAL NETWORK SERVICES
The R (Recall) button can be used to access additional network services. Contact your
network operator for further details.
Autres manuels pour SENSOR 500
3
Table des matières
Autres manuels AUDIOLINE Téléphone
AUDIOLINE
AUDIOLINE TEL2 Manuel utilisateur
AUDIOLINE
AUDIOLINE 1892 Manuel utilisateur
AUDIOLINE
AUDIOLINE TEL4CLIP Manuel utilisateur
AUDIOLINE
AUDIOLINE TEL18 Manuel utilisateur
AUDIOLINE
AUDIOLINE 30 Manuel utilisateur
AUDIOLINE
AUDIOLINE 33 Manuel utilisateur
AUDIOLINE
AUDIOLINE 22HS Manuel utilisateur
AUDIOLINE
AUDIOLINE AL502 Manuel utilisateur
AUDIOLINE
AUDIOLINE TEL28 Manuel utilisateur
AUDIOLINE
AUDIOLINE Funny Cow Phone Manuel utilisateur
AUDIOLINE
AUDIOLINE TEL39G CLIP Manuel utilisateur
AUDIOLINE
AUDIOLINE TEL38CLIP Manuel utilisateur
AUDIOLINE
AUDIOLINE PHONE EASY Manuel utilisateur
AUDIOLINE
AUDIOLINE TAB935 Manuel utilisateur
AUDIOLINE
AUDIOLINE TEL105 Manuel utilisateur
AUDIOLINE
AUDIOLINE TEL 8 PLUS Manuel utilisateur
AUDIOLINE
AUDIOLINE 503 Manuel utilisateur
AUDIOLINE
AUDIOLINE PHONE EASY Manuel utilisateur
AUDIOLINE
AUDIOLINE Bullet 280 Manuel utilisateur
AUDIOLINE
AUDIOLINE TEL 8 PLUS Manuel utilisateur
