AudioCodes Mediant 800 Manuel utilisateur

User's Manual

AudioCodes Series of Gateways & Session Border Controllers

Mediant 800 Gateway &

E-SBC

Version 7.2

Notice Mediant 800 Gateway & E-SBC | User's Manual

Notice

Information contained in this document is believed to be accurate and reliable at the time of

printing. However, due to ongoing product improvements and revisions, AudioCodes can-

not guarantee accuracy of printed material after the Date Published nor can it accept

responsibility for errors or omissions. Updates to this document can be downloaded from

https://www.audiocodes.com/library/technical-documents.

This document is subject to change without notice.

Date Published: April-29-2019

WEEE EU Directive

Pursuant to the WEEE EU Directive, electronic and electrical waste must not be disposed of with

unsorted waste. Please contact your local recycling authority for disposal of this product.

Customer Support

Customer technical support and services are provided by AudioCodes or by an authorized

AudioCodes Service Partner. For more information on how to buy technical support for AudioCodes

products and for contact information, please visit our website at

https://www.audiocodes.com/services-support/maintenance-and-support.

Documentation Feedback

AudioCodes continually strives to produce high quality documentation. If you have any comments

(suggestions or errors) regarding this document, please fill out the Documentation Feedback form

on our website at https://online.audiocodes.com/documentation-feedback.

Stay in the Loop with AudioCodes

Notes and Warnings

The device is an indoor unit and therefore, must be installed only INDOORS.

The scope of this document does not fully cover security aspects for deploying the

device in your environment. Security measures should be done in accordance with your

organization’s security policies. For basic security guidelines, refer to the

Recommended Security Guidelines document.

- ii -

Notice Mediant 800 Gateway & E-SBC | User's Manual

Throughout this manual, unless otherwise specified, the term device refers to your

AudioCodes product.

Before configuring the device, ensure that it is installed correctly as instructed in the

Hardware Installation Manual.

OPEN SOURCE SOFTWARE. Portions of the software may be open source software

and may be governed by and distributed under open source licenses, such as the terms

of the GNU General Public License (GPL), the terms of the Lesser General Public

License (LGPL), BSD and LDAP , which terms are located at

https://www.audiocodes.com/services-support/open-source and all are incorporated

herein by reference. If any open source software is provided in object code, and its

accompanying license requires that it be provided in source code as well, Buyer may

receive such source code by contacting AudioCodes, by following the instructions

available on AudioCodes website.

●Some of the features described in this document are licensed features and are

available only if the installed License Key contains these features.

●This device includes software developed by the OpenSSL Project for use in the

OpenSSL Toolkit (http://www.openssl.org/ ).

●This device includes cryptographic software written by Eric Young

(eay@cryptsoft.com).

Related Documentation

Document Name

SBC-Gateway-MSBR Series Release Notes

Mediant 800 Gateway & E-SBC Hardware Installation Manual

Complementary Guides

CLI Reference Guide

IP-based Voice Mail Configuration Note

SNMP User's Guide

SBC Design Guide

Recommended Security Guidelines Configuration Note

Syntax for SIP Message Manipulation Reference Guide

CAS Protocol Table Configuration Note

- iii -

Notice Mediant 800 Gateway & E-SBC | User's Manual

Document Name

Utility Guides

INI Viewer & Editor Utility User's Guide

DConvert User's Guide

CLI Wizard User's Guide

Document Revision Record

LTRT Description

10297 Initial document release for Version 7.2.

10298 ■Updated to patch version 7.20A.001.

■Updated sections: Computer Requirements (browser support);

Accessing the Web Interface (autocompletion); Areas of the GUI

(illustration); Configuring Management User Accounts (password); CLI-

Based Management (permissible user levels); Configuring TLS

Certificate Contexts (TLS version); Configuring Physical Ethernet Ports

(show command); Configuring Underlying Ethernet Devices (max.

VLANs); SIP Signaling Messages (procedure); First Incoming Packet

Mechanism (NAT by Signaling); Robust Receipt of Media Streams by

Media Latching; Configuring General Security Settings (Web path);

Viewing IDS Alarms (show command); Viewing and Deleting DHCP

Clients (show command); Configuring the Device's LDAP Cache;

Centralized Third-Party Routing Server (SIP messages, Credentials for

Authentication); Configuring Call Setup Rules (dial plan query); Call

Setup Rule Examples; Three-Way Conferencing; Configuring Metering

Tones (procedure); Feature List (typo); Registration Refreshes; Using

Dial Plan Tags for IP-to-IP Routing (procedure); Enabling Interworking

of SIP and SIP-I Endpoints (SPIROU, SIP header X-AC-Action);

Configuring WebRTC (procedure); Configuring BroadSoft's Shared

Phone Line Call Appearance for Survivability (procedure); Enabling the

User Info Table (Web path); Configuring GW User Info Table in

Loadable Text File (note); Configuring SBC User Info Table in Loadable

Text File (syntax); Automatic Provisioning (CLI Script file); Configuring

RTCP XR (IP Group); Enabling Same Call Session ID over Multiple

Devices (removed); FXS Line Testing (removed).

■New sections: Utilizing Gateway Channel Resources for SBC; Using

Dial Plan Tags for Call Setup Rules; Using Dial Plan Tags for Message

Manipulation; VoIPerfect.

- iv -

Notice Mediant 800 Gateway & E-SBC | User's Manual

LTRT Description

■Updated parameters: TLSContexts_TLSVersion; InterfaceTable_

InterfaceName; IPGroup_MediaRealm (Web name); CallSetupRules_

AttributesToQuery (Web name); IPProfile_SBCIceMode (value);

IPProfile_SBCRTCPFeedback (values); IpProfile_

MediaIPVersionPreference; ForwardOnBusyTrunkDest_

ForwardDestination (note); ConditionTable_Name (max. chars); Test_

Call_RouteBy (default, values); CLIPrivPass; NATMode (values);

SendAcSessionIDHeader (removed); QOEPort (removed);

MaxGeneratedRegistersRate; GeneratedRegistersInterval;

EnableTCPConnectionReuse (Web name); PublicationIPGroupID;

RTCPXRESCTransportType (removed); RTCPXREscIP (removed);

RTCPXRReportMode; SetIp2TelRedirectScreeningInd (Web name);

SBCUserRegistrationGraceTime; SBCKeepOriginalCallId

■New parameters: IPGroup_SBCKeepOriginalCallID; IPGroup_

SBCDialPlanName; IPGroup_CallSetupRulesSetId; CallSetupRules_

QueryType; CallSetupRules_QueryTarget; IpProfile_

SBCVoiceQualityEnhancement; IpProfile_SBCMaxOpusBW;

IpProfile_SBCISUPVariant; WebLoginBlockAutoComplete;

EnforcePasswordComplexity; AUPDCliScriptURL; TrunkLifeLineType.

10621 ■Updated sections: Changing Index Position of Table Rows; Searching

for Configuration Parameters; Configuring TLS Certificate Contexts

(IPSec removed); Enabling the HTTP Proxy Application (license);

FXS/FXO Coefficient Types (REN); Direct Media; Configuring SBC IP-

to-IP Routing (IP Group (load balancing); VoIPerfect; MAC Address

Placeholder in Configuration File Name.

■New sections: Configuring IP Group Sets.

■Updated parameters: IpProfile_DisconnectOnBrokenConnection;

SIPInterface_SBCDirectMedia; IPProfile_SBCDirectMediaTag;

IP2IPRouting_DestType; IPOutboundManipulation_

PrivacyRestrictionMode; BrokenConnectionEventTimeout.

■New parameters: IP2IPRouting_IPGroupSetName; EnableNonCallCdr;

NoRTPDetectionTimeout; PGroupSet; IPGroupSetMember.

10623 ■Patch version 7.20A.100.

- v -

Notice Mediant 800 Gateway & E-SBC | User's Manual

LTRT Description

■Updated sections: CLI (telnet removed); Areas of the GUI (SBC

Wizard); Assigning Rows from Other Tables (search, add new, and

view); Invalid Value Indications; Creating a Login Welcome Message;

Configuring Management User Accounts (CLI); Enabling SSH with

RSA Public Key for CLI (public key); Configuring TLS Certificate

Contexts (DTLS); Assigning CSR-based Certificates to TLS Contexts;

Generating Private Keys for TLS Contexts; SRTP using DTLS Protocol;

Building and Viewing your Network Topology; SIP-based Media

Recording (multiple SRSs); Enabling SIP-based Media Recording;

Configuring SIP Recording Rules; Configuring Proxy Sets (keep-alive);

FXS/FXO Coefficient Types; DID Wink; WebRTC (RFCs); Configuring

WebRTC; VoIPerfect; Pre-Configured IP Groups; Normal Mode (CRP);

Emergency Mode (CRP); Auto Answer to Registrations (CRP);

Network Topology Types and Rx/Tx Ethernet Port Group Settings;

License Key; Viewing the License Key; Obtaining License Key for

Feature Upgrade (removed); Installing the a New License Key; Installing

License Key through Web Interface; Upgrading SBC Capacity Licenses

by OVOC License Pool; Viewing Device Information; Configuring

PacketSmart Agent for Network Monitoring; Viewing Call Routing

Status (removed); Configuring RTCP XR (IP Group); Configuring

RADIUS Accounting (typo for Accounting-Request); Configuring Multi-

Line Extensions and Supplementary Services; Automatic Provisioning

(Startup CLI Script File).

■New sections: Customizing the Web Interface; Replacing the Corporate

Logo; Replacing the Corporate Logo with an Image; Replacing the

Corporate Logo with Text; Customizing the Product Name;

Customizing the Favicon; SRTP using DTLS Protocol; SBC Wizard;

Viewing the Device's Product Key; Saving Configuration to a File;

Loading a Configuration File; Viewing Proxy Set Status; Local Handling

of BRI Call Forwarding.

■Updated parameters: TLSContexts_ServerCipherString; TLSContexts_

ClientCipherString; NATTranslation_SourceStartPort; NATTranslation_

SourceEndPort; NATTranslation_TargetStartPort; NATTranslation_

TargetEndPort; SNMPSysOid; SNMPTrapEnterpriseOid;

EnableCoreDump (typo); HTTPSCipherString (removed);

SSHAdminKey; SessionExpiresDisconnectTime;

ISDNJapanNTTTimerT3JA; BrokenConnectionEventTimeout;

RADIUSRetransmission (default); RadiusTO (default);

SIPRecRouting_RecordedIPGroupName; SIPRecRouting_

SRSIPGroupName.

■New parameters: WebUsers_SSHPublicKey; TLSContexts_

DTLSVersion; TLSContexts_DHKeySize; SIPRecRouting_

SRSRedundantIPGroupName; ProxySet_SuccessDetectionRetries;

ProxySet_SuccessDetectionInterval; ProxySet_Fail-

ureDetectionRetransmissions; ProxySet_MinActiveServersLB;

WebUsers; WebFaviconFileUrl; ISDNSuppServ_CFB2PhoneNumber;

ISDNSuppServ_CFNR2PhoneNumber; ISDNSuppServ_

CFU2PhoneNumber; ISDNSuppServ_NoReplyTime;

AUPDStartupScriptURL; BRICallForwardHandling.

- vi -

Notice Mediant 800 Gateway & E-SBC | User's Manual

LTRT Description

10626 ■Updated sections: Configuring VoIP LAN Interface for OAMP (CLI);

Configuring Management User Accounts (typo); Enabling SNMP;

Configuring IP Network Interfaces; SIP-based Media Recording

(multiple SRS); Configuring LDAP Servers (max. and cache);

Configuring Call Setup Rules; Alternative Routing Based on IP

Connectivity (Busy Out); Alternative Routing Based on SIP Responses

(Busy Out); Fixed Mapping of SIP Response to ISDN Release Reason;

Fixed Mapping of ISDN Release Reason to SIP Response; Configuring

SBC IP-to-IP Routing (note); Configuring SIP Response Codes for

Alternative Routing Reasons; SBC Wizard (screens); Auxiliary Files

(SBC Wizard); Viewing IP Connectivity (typo); Creating Core Dump and

Debug Files upon Device Crash (reset)

■New sections: Debugging Remote HTTP Services

■Updated parameters: IpProfile_SBCUseSilenceSupp (removed):

SIPRecRouting_SRSIPGroupName; SIPInterface_InterfaceName

(max. char); ProxySet_ProxyName (max. char);

MessageManipulations_ManipulationName (max. char);

MessagePolicy_Name (max. char); AllowedAudioCodersGroups_

Name (max. char); AllowedVideoCodersGroups_Name (max. char);

TelProfile_ProfileName (max. char); PREFIX_RouteName (max. char);

GWRoutingPolicy_Name; PstnPrefix_RouteName (max. char); _

ManipulationName (max. char); SBCAdmissionControl_

AdmissionControlName (max. char); Classification_

ClassificationName (max. char); IP2IPRouting_RouteName (max.

char); SBCRoutingPolicy_Name (max. char); IPGroupSet_Name (max.

char); IPInboundManipulation_ManipulationName (max. char);

IPOutboundManipulation_ManipulationName (max. char); TelProfile_

ECNlpMode (2 removed); SBCAdmissionControl_Rate; EnableWe-

bAccessFromAllInterfaces; ResetWebPassword; DisableSNMP;

EnableCoreDump; SSHMaxLoginAttempts;

IgnoreAlertAfterEarlyMedia; EnableBusyOut; ECNLPMode;

ISDNInCallsBehavior (defaults); SecureCallsFromIP (note);

AltRoutingTel2IPEnable (note); ProtocolType (BRI removed)

■New parameters: HTTPProxySyslogDebugLevel; ChargeCode_

ChargeCodeName

10629 ■Updated with patch version 7.20A.150.

- vii -

Notice Mediant 800 Gateway & E-SBC | User's Manual

LTRT Description

■Updated sections: Areas of the GUI (Configuration Wizard button);

Enabling Disabling SNMP; Viewing Certificate Information (screen);

Assigning Externally Created Private Keys to TLS Contexts (pass-

phrase); Generating Private Keys for TLS Contexts (pass-phrase);

Importing Certificates into Trusted Certificate Store (bulk import);

Configuring Underlying Ethernet Devices (MTU); Configuring Firewall

Settings (note); SIP-based Media Recording (max.); Configuring

Remote Web Services (QoS routing); Centralized Third-Party Routing

Server (QoS); Configuring Proxy Sets; Configuring CAS State

Machines (note); Alternative Routing Based on IP Connectivity;

Configuring SBC IP-to-IP Routing; Configuring IP Group Sets (dial plan

tags); Configuring Dial Plans; Software Upgrade; Installing License Key

through Web Interface; Upgrading SBC Capacity Licenses by OVOC

License Pool; Configuring RADIUS Accounting (typo); Configuring

DTMF Tones for Test Calls; Configuring Basic Test Calls; Configuring

SBC Test Call with External Proxy (removed); Channel Capacity.

■New sections: Microsoft Skype for Business Presence of Third-Party

Endpoints; Registrar Stickiness; Configuring Pre-Parsing Manipulation

Rules; Configuring Private Wire Interworking; Configuring Rerouting of

Calls to Fax Destinations; Using Dial Plan Tags for Routing

Destinations; FXS Line Testing; Disconnecting and Reconnecting HA;

Viewing the License Key; Viewing the Device's Product Key;

Debugging Web Services.

■Updated parameters: AccessList_Source_IP; AccessList_Source_

Port; AccessList_Start_Port; AccessList_End_Port;

HTTPRemoteServices_HTTPType (option 5); IPGroup_

SBCDialPlanName (note); ProxySet_IsProxyHotSwap; ProxyIp_

IpAddress; IpProfile_SBCRemoteReferBehavior (4); IpProfile_

SBCPlayHeldTone; IP2IPRouting_Trigger (6); IP2IPRouting_DestType

(12); DialPlanRule_Tag; SBCCDRFormat_FieldType (818); Test_Call_

RouteBy; Test_Call_Play (tone); KeepAliveTrapPort (default);

SBCtestID (removed); ProxyIPListRefreshTime;

RegistrationRetryTime (note); EnableReansweringINFO;

EnablePChargingVector (note); EnableTDMoverIP (2);

EnableSBCApplication (default).

■New parameters: DeviceTable_MTU; SRD_SBCDialPlanName;

SIPInterface_PreParsingManSetName; IPGroup_Tags; Account_

RegistrarStickiness; Account_RegistrarSearchMode; Account_

RegEventPackageSubscription; IpProfile_SBCFaxReroutingMode;

IP2IPRouting_RoutingTagName; IP2IPRouting_InternalAction;

IPGroupSet_Tags; CustomerSN; MaxRegistrationBackoffTime;

MaxSDPSessionVersionId; UseRandomUser; UnregisterOnStartup;

PresencePublishIPGroupId; EnableMSPresence;

PreParsingManipulationSets; PreParsingManipulationRules;

HookFlashFromMediaIP; MWINotificationTimeout;

EnableTDMOverIPforTrunk; CASOrientedBoard;

RoutingServerQualityStatus; RoutingServerQualityStatusRate;

TelProfile_MWINotificationTimeout.

10631 ■Updated with patch version 7.20A.152.

- viii -

Notice Mediant 800 Gateway & E-SBC | User's Manual

LTRT Description

■Updated sections: Configuring the LDAP Search Filter Attribute (Web

path); Enabling LDAP Searches for Numbers with Characters;

Microsoft Skype for Business Presence of Third-Party Endpoints;

Configuring the Device for Skype for Business Presence (example);

Configuring Media Realm Extensions; Configuring SBC IP-to-IP

Routing (back to the sender); Prerecorded Tones File; Installing on HA

Devices (note); Loading a Configuration File (note); Channel Capacity

and Capabilities; Technical Specifications

■Updated parameters: SNMPReadOnlyCommunityString (max. chars);

SNMPReadWriteCommunityString (max. chars);

SNMPTrapCommunityString (max. chars); MediaRealmExtension_

IPv4IF; MediaRealmExtension_IPv6IF; ProxySet_

EnableProxyKeepAlive; PstnPrefix_SourceAddress;

SIPSDPSessionOwner; AddPrefix2ExtLine

■New parameters: IPGroup_SBCUserStickiness; IPProfile_

LocalRingbackTone; IPProfile_LocalHeldTone

10632 ■Updated with patch Version 7.20A.154.007

■Updated sections: Silence Suppression (removed); Fax / Modem

Transparent Mode (silnce suppression removed); Configuring SIP

Recording Rules (view sessions in CLI); Configuring RTP Base UDP

Port (note removed re SIP Interface); Centralized Third-Party Routing

Server (call preemption added); Pre-empting Existing Calls for E911 IP-

to-Tel Calls; Configuring Firewall Allowed Rules; Locking and Unlocking

the Device (typos); Viewing Active Alarms (max display)

■New sections: Configuring Additional Management Interfaces;

Configuring Specific UDP Ports using Tag-based Routing

■Updated parameters: WebUsers_Password (note); InterfaceTable_

ApplicationTypes; CpMediaRealm_PortRangeStart (note removed);

SIPInterface_UDPPort (note removed); ProxySet_

SuccessDetectionRetries (max); ProxySet_SuccessDetectionInterval

(max); Account_RegistrarSearchMode (phys link); AudioCoders_Sce

(global parameter removed); IpProfile_SCE (removed); IpProfile_

SBCRemoteReferBehavior (new option 5); IPProfile_

SBCRemoteHoldFormat (new option 6); IP2IPRouting_InternalAction;

SBCCDRFormat_Title (max. char.); WebUsers (CLI name); EnableWe-

bAccessFromAllInterfaces; FaxBypassPayloadType;

ModemBypassPayloadType; EnableSilenceCompression (removed)

■New parameters: SIPInterface_AdditionalUDPPorts; IPProfile_

SBCSupportMultipleDTMFMethods; AdditionalManagementInterfaces;

EnableWebAccessFromAllInterfaces; DefaultTerminalWindowHeight;

ActiveAlarmTableMaxSize; SBCRe-

moveSIPSFromNonSecuredTransport

10633 ■Updated with patch Version 7.20A.156.009

- ix -

Notice Mediant 800 Gateway & E-SBC | User's Manual

LTRT Description

■Updated sections: Configuring Management User Accounts; Device

Located behind NAT; Configuring a Static NAT IP Address for All

Interfaces (removed); SIP-based Media Recording (URL of France reg.;

note on SRS redundancy); Configuring SIP Recording Rules (note re

timestamp); Configuring the OVOC Server (note re report mode);

Configuring Call Setup Rules (ENUM); Call Setup Rule Examples

(e.g., 5); Interworking SIP Early Media (figure); Prerecorded Tones File;

Automatic Configuration Methods; DHCP-based Provisioning (note re

resets); Viewing Device Status on Monitor Page (analog status)

■New sections: Using Conditions for Starting a SIPRec Session;

Handling Registered AORs with Same Contact URIs; Configuring Dual

Registration; Provisioning the Device using DHCP Option 160;

Enabling SIP Call Flow Diagrams in OVOC

■Updated parameters: WebUsers_SessionLimit; WebUsers_

SessionTimeout; SRD_BlockUnRegUsers (option 2 updated);

SIPInterface_AdditionalUDPPorts; SIPInterface_BlockUnRegUsers;

IPGroup_SIPConnect; CallSetupRules_QueryType (OPTION 3);

CallSetupRules_QueryTarget; CallSetupRules_AttributesToQuery;

CallSetupRules_Condition; IpProfile_SBCSDPPtimeAnswer;

IpProfile_SBCPreferredPTime; IpProfile_

SBCRemoteRepresentationMode (0 updated); DialPlanRule_Tag;

LoggingFilters_LogDestination (new option 3); LoggingFilters_

CaptureType (new option 6); WebSessionTimeout (range); StaticNatIP

(removed); BriTEIAssignTrigger; BriTEIRemoveTrigger

EnableSilenceDisconnect, FarEndDisconnectSilencePeriod,

FarEndDisconnectSilenceMethod, FarEndDis-

connectSilenceThreshold, BrokenConnectionDuringSilence;

UseDisplayNameAsSourceNumber; SecureCallsFromIP;

SBCDBRoutingSearchMode; SBCKeepContactUserinRegister

■New parameters: WebUsers_CliSessionLimit; SIPRecRouting_

ConditionName; IPGroup_UserUDPPortAssignment;

NoAlarmForDisabledPort; CallFlowReportMode;

DhcpOption160Support; SIPRecTimeStamp

■Miscellaneous: EMS/SEM replaced with One Voice Operations Center

(OVOC) – text and screenshots

10635 ■Updated with Patch Version 7.20A.158.009

- x -

Autres manuels pour Mediant 800

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels AudioCodes Porte

AudioCodes

AudioCodes MP-104 Manuel utilisateur

AudioCodes

AudioCodes Mediant 800 Instructions de montage

AudioCodes

AudioCodes Mediant 500 Manuel utilisateur

AudioCodes

AudioCodes MediaPack MP-102 Manuel utilisateur

AudioCodes

AudioCodes MediaPack MP-11x Series Manuel utilisateur

AudioCodes

AudioCodes MediaPack 504 Instructions de montage

AudioCodes

AudioCodes MP-11 Manuel utilisateur

AudioCodes

AudioCodes Mediant 800 Manuel utilisateur

AudioCodes

AudioCodes Mediapack mp-11x Manuel utilisateur

AudioCodes

AudioCodes MediaPack Manuel utilisateur

AudioCodes

AudioCodes MediaPack MP-124 Manuel utilisateur

AudioCodes

AudioCodes Mediant 1000 Manuel utilisateur

AudioCodes

AudioCodes Mediant 800 Manuel utilisateur

AudioCodes

AudioCodes MediaPack MP-124 Manuel utilisateur

AudioCodes

AudioCodes Mediant 1000 Manuel utilisateur

AudioCodes

AudioCodes Mediant 2000 Manuel utilisateur

AudioCodes

AudioCodes MP-11x Fast Track Manuel utilisateur

AudioCodes

AudioCodes MediaPack MP-112 Instructions de montage

AudioCodes

AudioCodes Mediant 1000 Manuel utilisateur

AudioCodes

AudioCodes Mediant 1000 Manuel utilisateur

AudioCodes

AudioCodes Mediant 1000 Manuel utilisateur

AudioCodes

AudioCodes Mediant 1000 MSBG Manuel

AudioCodes

AudioCodes MP-104 Mode d’emploi

AudioCodes

AudioCodes Mediant 1000 Instructions de montage

Manuels Porte populaires d'autres marques

LST

LST M500RFE-AS Manuel utilisateur

Kinnex

Kinnex Media Gateway Manuel utilisateur

2N Telekomunikace

2N Telekomunikace 2N StarGate Manuel utilisateur

Mitsubishi Heavy Industries

Mitsubishi Heavy Industries Superlink SC-WBGW256 Manuel utilisateur

ZyXEL Communications

ZyXEL Communications ZYWALL2 ET 2WE Manuel utilisateur

Telsey

Telsey CPVA 500 - SIP Manuel utilisateur

RTA

RTA 460A-NNA4 Fiche technique

Shaw

Shaw Gateway HDPVR Manuel utilisateur

ABB

ABB VSN900 Guide de démarrage rapide

Commander

Commander Pulse Manuel utilisateur

2N Telekomunikace

2N Telekomunikace ATEUS EasyGate 501309E Manuel utilisateur

NETGEAR

NETGEAR C6300BD Manuel utilisateur

Amit

Amit CDW531AM Manuel utilisateur

HMS

HMS Netbiter EasyConnect EC150 Manuel utilisateur

Huawei

Huawei EchoLife HG620 Manuel utilisateur

AT&T

AT&T U-verse 3801 Manuel d'utilisation et d'entretien

Logic IO

Logic IO RTCU MX2 turbo Manuel utilisateur

Suttle

Suttle MediaMAX MXM-521 Manuel utilisateur