ATS RTFO Touch Manuel utilisateur
MAN - RTFO Touch - REV: 01
RTFO Touch
Rolling Thin Film Oven
INSTRUCTION MANUAL
This manual contains important operating and safety information. Carefully read and understand
the contents of this manual prior to the operation of this equipment.
www.atspa.com
REVISED OCTOBER 2018
Information in this document is subject to change without notice and does not represent a commitment on the part of
Applied Test Systems (ATS).
© Copyright Applied Test Systems 2018
For assistance with set-up or operation, contact the ATS service department. Please have this manual and product serial
number available when you call.
Telephone: +1-724-283-1212.
MAN - RTFO Touch - REV: 012
MAN - RTFO Touch - REV: 01 i
Manual Contents
A. Introduction.....................................................................................................................1
A.1 Unpacking....................................................................................................................................................1
A.2 After Sale Support.......................................................................................................................................1
B. Safety...............................................................................................................................2
B.1 For Owners, Operators, and Maintenance...................................................................................................2
B.2 Warnings......................................................................................................................................................3
B.3 Cautions.......................................................................................................................................................4
C. System Overview............................................................................................................5
C.1 Equipment Parts...........................................................................................................................................5
Front of Unit ...........................................................................................................................................5
Back of Unit............................................................................................................................................6
Interior Chamber....................................................................................................................................7
Interior Controls .....................................................................................................................................8
C.2 General Description.....................................................................................................................................9
Accessory Items ....................................................................................................................................9
Product Specications ...........................................................................................................................9
D. Installation..................................................................................................................... 10
D.1 General Installation....................................................................................................................................10
D.2 Leveling the Machine.................................................................................................................................10
D.3 Remote Communication Setup (Optional)..................................................................................................11
E. Verication..................................................................................................................... 12
E.1 Temperature Verication ............................................................................................................................12
E.2 Verication of Air Flow ............................................................................................................................... 12
F. Operation........................................................................................................................ 13
F.1 Test Setup...................................................................................................................................................13
Language.............................................................................................................................................14
Preheat ................................................................................................................................................14
Cycle Time (min)..................................................................................................................................15
Cycle Temperature (°C) .......................................................................................................................15
Cycle Air Flow (mL/min).......................................................................................................................15
Current Time........................................................................................................................................15
Preheat Delay (Optional)......................................................................................................................15
F.2 Run Test.....................................................................................................................................................16
G. Troubleshooting............................................................................................................18
G.1 Preface ......................................................................................................................................................18
G.2 Unit Will Not Turn On.................................................................................................................................18
G.3 Carousel Will Not Rotate...........................................................................................................................19
G.4 Fan Motor Will Not Rotate.........................................................................................................................19
G.5 Unit Has No Airow ...................................................................................................................................20
H. Maintenance..................................................................................................................21
H.1 Cleaning the Unit .......................................................................................................................................21
H.2 Replacing Damaged Cables......................................................................................................................21
H.3 Greasing the Bearings...............................................................................................................................21
Rear Bearing........................................................................................................................................21
Front Inside Bearing.............................................................................................................................22
H.4 Chain Maintenance....................................................................................................................................23
H.5 Tray Cleaning.............................................................................................................................................23
H.6 Replacement Parts....................................................................................................................................24
Appendix A: Warranty.......................................................................................................26
Appendix B: Wiring Diagram............................................................................................27
Appendix C: Image Glossary ...........................................................................................32
Appendix B: European Declaration of Conformity.........................................................33
MAN - RTFO Touch - REV: 01ii
MAN - RTFO Touch - REV: 01 | A. Introduction 1
A. Introduction
A.1 Unpacking
Retain all cartons and packing materials until the unit is operated and found to be in good condition. If
damage has occurred during shipping, notify Applied Test Systems (ATS) and the carrier immediately. If it is
necessary to le a damage claim, retain the packing materials for inspection by the carrier.
A.2 After Sale Support
If there are any questions concerning the operation of the unit or software, contact the ATS service
department at +1-724-283-1212. Before calling, please obtain the software revision number and the serial
number from the unit’s data tag or View Screen. A sample data tag is illustrated in Figure A.1, and can be
completed with the unit’s information for easy reference. Please be prepared to give a complete description
of the problem to the ATS service department.
Figure A.1 -ATS Sample Data Tag
MAN - RTFO Touch - REV: 01 | B. Safety
2
B. Safety
B.1 For Owners, Operators, and Maintenance
Read and understand all instructions and safety precautions listed in this manual before installing or
operating the unit. If there are any questions regarding operation of the unit or the instructions in this
manual, contact the ATS service department at +1-724-283-1212.
In addition to the safety warnings listed on the equipment, warnings are posted throughout this manual.
Read and follow these important instructions. Failure to observe these instructions can result in permanent
damage to the unit, signicant property damage, personal injury, or death.
All ATS equipment is designed to be operated with the highest level of safety. To maintain the safe operation
of this tester, ATS endeavors to educate the operator about safety issues surrounding certain parts of the
machinery. These safety issues are addressed through the use of labeling on the equipment. The following
labels may appear on your test unit:
Burn Hazard/Hot Surface
Electrical Shock/Electrocution
Protective Earth (Ground)
General Danger. When this symbol is displayed, user must always consult the manual to
determine the potential hazard(s) and any actions required to avoid them.
No Access for Unauthorized Persons
Read Operator’s Manual
Hand Entanglement
Ignition/Explosion
Additionally, the responsible body shall ensure that:
i. appropriate decontamination is carried out if hazardous material is spilled onto or into the
equipment
MAN - RTFO Touch - REV: 01 | B. Safety 3
ii. no decontamination or cleaning agents are used which could cause a hazard as a result of a
reaction with parts of the equipment or with material contained in it
iii. the manufacturer or his agent is consulted if there is any doubt about the compatibility of
decontamination or cleaning agents with parts of the equipment or with material contained in it
B.2 Warnings
The following statements are warning statements. Unlike caution statements, warning statements alert the
operator to conditions that may injure personnel. Operators must be aware of these conditions in order to
prevent injuries that may occur while operating this equipment.
WARNING: Disconnect power prior to performing maintenance. Place Main Power
Switch in ‘OFF’ position and disconnect the line cord from the power source before
performing any maintenance procedures
WARNING: Obey electrical code requirements. The oven and control system must be
wired and grounded in accordance with national and electrical code requirements.
WARNING: Be careful when working with equipment at elevated temperatures. In order
to prevent burns, wear protective clothing.
WARNING: Use caution when opening the oven. Electrically heated equipment can
cause severe burns.
WARNING: The air circulation fan is controlled by a door switch to protect operators
from the fan. If the fan continues to operate after the door is opened, discontinue use
immediately and contact the ATS Service Department at +1-724-283-1212.
WARNING: Unpack and operate on a stable surface.
WARNING: Pinch hazard.
WARNING: Do not open the side panel unless explicitly instructed to do so for
troubleshooting purposes.
WARNING: Do not use ammable solvents to clean the oven or use with products other
than designed for.
WARNING: Using solvents or products not specied by the equipment manufacturer
may create potential for formation of ammable or volatile gas mixtures. Always refer to
MAN - RTFO Touch - REV: 01 | B. Safety
4
product SDS or contact the manufacterer.
WARNING: Do not place objects that may obstruct the sample rack or blower.
WARNING: Before removing the air coil assembly always make sure the unit is powered
o and unplugged.
WARNING: Unit should always be operated in a well ventilated area. Refer to and
adhere to SDS sheets of product being tested.
WARNING: Proper Personal Protective Equipment (PPE) required for removal of hot
glassware.
B.3 Cautions
The following statements are caution statements. These statements alert the operator to conditions that may
damage equipment. Operators must be aware of these conditions in order to ensure safe operation of the
equipment.
CAUTION: Installation of electrical devices must be accomplished by competent
personnel and done in accordance with any current local and national codes.
CAUTION: The RTFO Touch must be grounded and wired in accordance with national
and local electrical code requirements.
CAUTION: Before energizing the electrical power to the RTFO Touch, place all controls
in an OFF position.
CAUTION: Do not exceed the maximum operating temperature.
CAUTION: All supporting and contacting surfaces must be non-ammable. Do not allow
ammable materials to contact the shell.
CAUTION: If an emergency shutdown needs to be performed, place ON/OFF switch in
an OFF position.
CAUTION: Do not overow RTFO Touch bottles. Refer to test specications for proper
amount of material.
MAN - RTFO Touch - REV: 01 | C. System Overview 5
C. System Overview
C.1 Equipment Parts
Front of Unit
1. HMI
2. Fan Motor
3. Carousel Wheel Motor
4. Power Indicator
5. Power Switch
6. USB Interface
7. Jog Button
8. Carousel with High Temp.
Silicon Rings
9. Leveling Legs
Figure C.1 - RTFO Touch Front
1
23
4
56
7
9
8
MAN - RTFO Touch - REV: 01 | C. System Overview
6
Back of Unit
1. Ethernet Port
2. Cooling Fan
3. Alarm
4. Air Inlet/Input Filter
5. Power Cord
Figure C.2 - RTFO Touch Back
1
2
4
3
5
Table des matières
Autres manuels ATS Four
