ATEN UC2322 Manuel utilisateur
UC2322 / UC2324
USB-to-Serial RS232 Hub
User Manual
- 2 -
Compliance Statements
FEDERAL COMMUNICATIONS COMMISSION
INTERFERENCE STATEMENT
This equipment has been tested and found to comply with the
limits for a Class B digital service, pursuant to Part 15 of the
FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation. Any changes or modifications made to this
equipment may void the user’s authority to operate this
equipment. This equipment generates, uses, and can radiate
radio frequency energy. If not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician
for help.
The device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
- 3 -
FCC Caution: Any changes or modifications not expressly
approved by the party responsible for compliance could void the
user's authority to operate this equipment.
KCC Statement
Industry Canada Statement
This Class B digital apparatus complies with Canadian ICES-
003.
RoHS
This product is RoHS compliant.
- 4 -
ATEN USB-to-Serial RS-232 Hub
User Manual
Online Registration
Telephone Support
Technical Support
For international online technical support – including
troubleshooting, documentation, and software updates:
http://support.aten.com
For North American technical support:
International http://support.aten.com
International 886-2-8692-6959
China 86-400-810-0-810
Japan 81-3-5615-5811
Korea 82-2-467-6789
North America 1-888-999-ATEN ext 4988
1-949-428-1111
Email Support support@aten-usa.com
Online
Technical
Support
Troubleshooting
Documentation
Software Updates
http://support.aten.com
Telephone Support 1-888-999-ATEN ext 4988
- 5 -
Package Contents
The ATEN USB-to-Serial RS-232 Hub package contains the
following items:
1 UC2322 / UC2324 USB-to-Serial RS-232 Hub
1 USB cable
1user instructions
Check to make sure that all the components are present and that
nothing got damaged in shipping. If you encounter a problem,
contact your dealer.
Read this manual thoroughly and follow the installation and
operation procedures carefully to prevent any damage to the
unit, and/or any of the devices connected to it.
*Features may have been added to the ATEN USB-to-Serial
RS-232 Hub since this manual was printed. Please visit our
website to download the most up-to-date version of the
manual.
- 6 -
Overview
The ATEN USB-to-Serial RS-232 Hub provides an external
plug-and-play RS-232 serial connection for computers,
notebooks, laptops, and hand-held computing devices that
support the USB specification. It comes with 2 or 4 standard DB-
9 male connectors for peripherals to plug into, and a USB cable
for connecting to the computer's USB port, or to a USB hub.
There are two models in the ATEN USB-to-Serial RS-232 Hub
series:
UC2322 – 2-Port USB-to-Serial RS-232 Hub
UC2324 – 4-Port USB-to-Serial RS-232 Hub
The ATEN USB-to-Serial RS-232 Hub provides mobile phones,
PDAs, digital cameras, modems and ISDN terminal adapters
with high quality serial connections at a data transfer rate of up
to 115.2 Kbps. It makes the USB interface transparent to the
peripherals, allowing them to easily interface with the USB,
eliminating the setup hassle found with traditional serial port
connections. As a USB specification compliant device, the
ATEN USB-to-Serial RS-232 Hub also supports energy-saving
suspend and resume operations.
The ATEN USB-to-Serial RS-232 Hub provides a quick, simple,
and cost-effective solution and is ideal for various kinds of
communication and automation applications.
Note:The ATEN USB-to-Serial RS-232 Hub does not support
devices such as serial mice that require an IRQ number or I/O
address.
- 7 -
Features
Easy way to add 2 or 4 RS-232 serial ports
Fully compliant with USB 1.1; USB 2.0 compatible
Supports RS-232 serial interface
Supports automatic handshake mode
Up to 115.2 Kbps data transfer rate for each serial port
Dual data buffers for each upstream and downstream data
transfer
No IRQ, DMA, I/O address resources required
Supports hot-swapping and plug-and-play
Built-in 16KV ESD protection
Supports both bus power and external power
Works with cellular phones, PDAs, digital cameras, modems
and ISDN terminal adapters
Regulatory Approvals
System Requirements
Computers
The driver must be installed on the host computer to be able to
communicate with the connected USB peripheral devices.
Operating Systems
Supported operating systems are shown in the table, below:
Hardware CE, FCC (Class B)
Driver Microsoft WHQL
OS Version
Windows 2000 or above
- 8 -
USB-to-Serial RS-232 Hub Front View
UC2322
UC2324
No. Component Description
1 power LED Lights to indicate that the USB-to-
Serial RS-232 hub is receiving
power and is up and running.
2 port link LED Lights to indicate that there is a
working RS-232 connection to the
corresponding port.
3 USB Type-B port The USB cable from your
computer or USB hub plugs in
here.
4 RS-232 serial port
(UC2324 only)
Your peripheral devices, such as
digital cameras, scanners, PDAs,
etc., plug in here.
1 32
1 342
- 9 -
USB-to-Serial RS-232 Hub Rear View
UC2322
UC2324
Side View
No. Component Description
1 RS-232 serial ports Your peripheral devices, such as
modems, scanners, PDAs, etc.,
plug in here.
2 power jack The power adapter cable plugs in
here. Note: The USB-to-Serial
RS-232 hub is bus-powered, so
the use of a power adapter is
optional.
1
1
1
- 10 -
Installation
Follow the steps below to connect the USB-to-Serial RS-232
Hub.
1. Install drivers.
a) Download the most up-to-date driver from our ATEN
product web page and unzip the downloaded file.
b) Select an appropriate operating system and system type
that your computer supports.
Make sure that all devices you will be installing are
properly grounded.
UC2324 (Front) UC2324 (Rear) UC2324 (Side)
UC2322 (Front) UC2322 (Rear) UC2322 (Side)
3
3
5
5
3
2
2
USB
USB
RS-232
RS-232
RS-232
Power
Power
Autres manuels pour UC2322
2
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels ATEN Changer
ATEN
ATEN VS481C Manuel utilisateur
ATEN
ATEN CS1308 Manuel utilisateur
ATEN
ATEN US3310 Manuel utilisateur
ATEN
ATEN CM1942 Manuel utilisateur
ATEN
ATEN MasterView CS-1732A Manuel utilisateur
ATEN
ATEN CL3884NW Manuel utilisateur
ATEN
ATEN ACS1208 Manuel utilisateur
ATEN
ATEN MASTER VIEW CS-124U Manuel utilisateur
ATEN
ATEN ALTUSEN KH1516 Manuel utilisateur
ATEN
ATEN US221A Manuel utilisateur
ATEN
ATEN CS-72E Manuel utilisateur
ATEN
ATEN Master View CS-1754 Manuel utilisateur
ATEN
ATEN CL5808 Manuel utilisateur
ATEN
ATEN Altusen KL1116L Manuel utilisateur
ATEN
ATEN KN4164Vl Manuel utilisateur
ATEN
ATEN CS724KM Manuel utilisateur
ATEN
ATEN ALTUSEN SN0108 Manuel utilisateur
ATEN
ATEN VS0801H Manuel utilisateur
ATEN
ATEN CS1182DP Manuel utilisateur
ATEN
ATEN CL5716I Manuel utilisateur
