ATEN AS-251S Manuel utilisateur

1 of 4

2 To 1 Serial (RS-232)

AUTO SWITCH

AS-251S

User Manual

Read this manual thoroughly and follow the installation procedures carefully to

prevent any damage to the AS-251S and/or the devices it connects to.

Manual Part No. PPAG-905-001

Printed in Taiwan 05/2002

All brand names and trademarks are the registered property of their respective owners.

Packing Checklist

1 x AS-251S 2 to 1 Serial (RS-232) Auto Switch

1 x User's Manual

If anything is damaged or missing, contact your dealer.

Overview

This easy to install Auto Switch allows two computers to share a serial printer. Since it features a light

weight, compact, design, and requires no external power, it can be easily placed in any convenient

location.

of 4

Features

No External Power Required

Automatic and Manual Selection

Transparent to the User

Easy to Install and Operate

Compact size

Installation

Make sure that all the equipment to be connected up is powered Off.1.

Use a DB-25 male to female serial cable to connect your first computer's COM1 or COM2 port

to the Aconnector of the AS-251S.

Use a DB-25 male to female serial cable to connect your second computer's COM1 or COM2

port to the Bconnector of the AS-251S.

Use a DB-25 male to female serial cable to connect your printer's serial port to the Cconnector

of the AS-251S.

Turn on the power to all the equipment.5.

Switch Setting

There are two slide switches located on the unit's side panel that are used to configure the AS-251S.

The one on the left determines which port has access to the printer; the one on the right sets the

timeout value.

of 4

Selected Port

The port that has access to the printer is determined with this three position slide switch as follows:

Position Result

AUTO Under AUTO (the central position of the switch), access to the printer

is automatic, and is determined on a first come first served basis. As

soon as a signal is received, the switch immediatley connects and

stays on the port until the print job has finished.

B Sliding the switch to the B position (the extreme right), locks the

switch on the B port and locks out the A port. Only signals from the

computer connected to the B port will be sent to the printer. The B

LED on the unit's top panel lights (and the A LED is off) to indicate

this.

A Sliding the switch to the A position (the extreme left), locks the switch

on the A port and locks out the B port. Only signals from the

computer connected to the A port will be sent to the printer. The A

LED on the unit's top panel lights (and the B LED is off) to indicate

this.

Timeout

The timeout switch is a two position switch:

Slide the switch to the left position for a 10 second timeout.

Slide the switch to the right position for a 60 second timeout.

Specifications

Function Specification

Cable Distance 15 m

Input Connectors 2 x DB-25 Female (DCE)

Output Connectors 1 x DB-25 Female (DTE)

Port Selection Automatic / Selectable

Timeout 10 / 60 secs.

Operating Temp. 5 to 40˚ C

of 4

Storage Temp. -20 to -60˚ C

Humidity 0 - 80% RH

Housing Plastic

Weight 130 g

Dimensions (L x W x H) 105 x 85 x 26 mm

Limited Warranty

IN NO EVENT SHALL THE DIRECT VENDOR S LIABILITY EXCEED THE PRICE PAID FOR THE

PRODUCT FORM DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL

DAMAGES RESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITS DOCUMENTATION.

The direct vendor makes no warranty or representation, expressed, implied, or statutory with respect

to the contents or use of this documentation, and specially disclaims its quality, performance,

merchantability, or fitness for any particular purpose.

The direct vendor also reserves the right to revise or update device or documentation without

obligation to notify any individual or entity of such revisions, or update. For further inquires please

contact your direct vendor.

Table des matières

Autres manuels ATEN Changer

ATEN

ATEN Petite CS62US Manuel utilisateur

ATEN

ATEN US221A Manuel utilisateur

ATEN

ATEN CS 1644 Manuel utilisateur

ATEN

ATEN CS782DP Manuel utilisateur

ATEN

ATEN Master View ACS-1712 Manuel utilisateur

ATEN

ATEN VP2730 Manuel utilisateur

ATEN

ATEN CS1792 Manuel utilisateur

ATEN

ATEN CS1182DP Manuel de service

ATEN

ATEN CL5708I Manuel utilisateur

ATEN

ATEN Slideaway CL5708 Manuel utilisateur

ATEN

ATEN ALTUSEN SN0108 Manuel utilisateur

ATEN

ATEN VS-201 Manuel utilisateur

ATEN

ATEN VS-881 Manuel utilisateur

ATEN

ATEN Altusen KM0932 Manuel utilisateur

ATEN

ATEN Altusen KN1108V Manuel utilisateur

ATEN

ATEN RCM Series Manuel utilisateur

ATEN

ATEN Bi-Tronics AF-142 Manuel utilisateur

ATEN

ATEN Altusen KM0032 Manuel utilisateur

ATEN

ATEN Master View CS-72A Manuel utilisateur

ATEN

ATEN KL9116 Manuel utilisateur

ATEN

ATEN CL5708IM Manuel utilisateur

ATEN

ATEN ALTUSEN KL1508 Manuel de l'opérateur

ATEN

ATEN CN9600 Manuel utilisateur

ATEN

ATEN Altusen KN4116VA Manuel utilisateur

Manuels Changer populaires d'autres marques

URC

URC Total Control MFS-8 Manuel utilisateur

Azbil

Azbil HPQ-D11 Manuel utilisateur

Sony

Sony DFS-900M Manuel utilisateur

SICK

SICK i17S Manuel utilisateur

F&F

F&F SZR-277 Manuel utilisateur

Shure

Shure UAMS/BK Manuel utilisateur

Dräger

Dräger X-zone Switch Off Manuel utilisateur

Asco

Asco Joucomatic 349 Series Manuel utilisateur

BT Mini Hub Manuel utilisateur

D-Link

D-Link DES-1226G Manuel utilisateur

Johnson Controls

Johnson Controls FS80-C Manuel utilisateur

Alcatel-Lucent

Alcatel-Lucent 7450 ESS-12 Manuel utilisateur

MicroNet

MicroNet SP1200A Manuel utilisateur

Ruijie

Ruijie RG-PF2920 Series Manuel d'installation et d'exploitation

Altinex

Altinex DA1914SX Manuel utilisateur

MiLAN

MiLAN MIL-SM2401M Manuel utilisateur

RJM

RJM MASTERMIND PBC/6X Manuel utilisateur

Atlas

Atlas MMK-KVM8 Manuel utilisateur