ATCOM Rainbow4 Manuel utilisateur
Rainbow 4(s) Quick Start Guide
2
Content
1、Installation and access ...........................................................................................................................3
1.1 Connection .....................................................................................................................................3
1.2 Stand bracket installation instruction .............................................................................................3
1.3 Interface description.......................................................................................................................4
1.4 Check IP address ............................................................................................................................5
1.5 Enter the Setting of telephone ........................................................................................................5
2、Quick Configuration..............................................................................................................................6
2.1、Network Configuration................................................................................................................6
2.2、Account Configuration ................................................................................................................8
http://arttel.ru
http://arttel.ru/shop/ip-telefony/ip-telefon-atcom-rainbow-4s
Rainbow 4(s) Quick Start Guide
3
1. Installation and access
1.1 Connection
Set up Rainbow 4(s) as below:
1.2 Stand bracket installation instruction
A. Put the bottom side of the IP phone upside and press one-side joints of stand
bracket into the slot, please refer the picture as below:
B. Press the other side joints into the slot according to the direction of the arrow:
http://arttel.ru
http://arttel.ru/shop/ip-telefony/ip-telefon-atcom-rainbow-4s
Rainbow 4(s) Quick Start Guide
4
C. It is the right picture after fixing the stand bracket below:
D. Disassemble the stand bracket:
Push the spring joint of stand and pull the stand according to the direction of the
arrow. When the joints are pulled out of the slot, you can take off the stand
bracket：
http://arttel.ru
http://arttel.ru/shop/ip-telefony/ip-telefon-atcom-rainbow-4s
Rainbow 4(s) Quick Start Guide
5
1.3
Wiring instruction
After stand bracket fixed, please plug in all wires or cables as below:
1.4 Check IP
Rainbow4(s) uses DHCP mode by default, and you can review its current IP
address by pressing key when it is powered on and connected to the network.
http://arttel.ru
http://arttel.ru/shop/ip-telefony/ip-telefon-atcom-rainbow-4s
Rainbow 4(s) Quick Start Guide
6
1.5 Enter the Setting of telephone
Connect the PC and telephone in one network, input the IP address of
telephone at a browser and press “Enter”, you will be required to input the
username and password to access the web page. The username/password as
below:
Username
Password
Description
admin
admin
For Administrators
user
user
For General Users
2、Wizard
After log in the webpage, you’re able to set the telephone by quick configuration. Configure the
telephone quickly via Web：Basic→Wizard
User should set the below two parts in turn,
1. Network——LAN Port；
2. Account——SIP。
2.1
、
Network Configuration
There is 3 options for network access,
http://arttel.ru
http://arttel.ru/shop/ip-telefony/ip-telefon-atcom-rainbow-4s
Rainbow 4(s) Quick Start Guide
7
1. If chosen DHCP, the telephone will be assigned a IP address
automatically, click the button “Next” to enter the web page of “Account
Configuration”.
2. If chosen Static IP，user should input the IP address manually for the
telephone, click the button “Next” to enter the web page of “Static IP
Address”.
After IP address filled manually, click the button “Next” to enter the web
page of “Account Configuration”, or click the button “Back” to back to web page
of “Network Configuration”.
3. If chosen PPPoE, user should input the username/password (provide by
ISP) of PPPoE manually and then click the button “Next” to enter the web
page of “PPPoE”,
After the username/password of PPPoE filled manually, click the button
“Next” to enter the web page of “Account Configuration”, or click the button
“Back” to back to web page of “Network Configuration”.
Network Configuration can be completed in below webpage,
http://arttel.ru
http://arttel.ru/shop/ip-telefony/ip-telefon-atcom-rainbow-4s
Rainbow 4(s) Quick Start Guide
8
2.2
、
Account Configuration
The account configuration info will be saved to Line 1.
Click the buttom “Finish” to save network configuration and account
configuration, and click “Back” back to the previous web page.
http://arttel.ru
http://arttel.ru/shop/ip-telefony/ip-telefon-atcom-rainbow-4s
Ce manuel convient aux modèles suivants
1
Table des matières
Autres manuels ATCOM Téléphone IP
ATCOM
ATCOM A68 Manuel utilisateur
ATCOM
ATCOM AT-640P Manuel utilisateur
ATCOM
ATCOM AT800D Manuel utilisateur
ATCOM
ATCOM D2X Manuel utilisateur
ATCOM
ATCOM Nimbus CQ400 Manuel utilisateur
ATCOM
ATCOM AT800DP Manuel utilisateur
ATCOM
ATCOM AT530 Manuel utilisateur
ATCOM
ATCOM AT810 series Manuel utilisateur
ATCOM
ATCOM AT-620 Manuel utilisateur
ATCOM
ATCOM Rainbow2 Manuel utilisateur
ATCOM
ATCOM A40 Manuel utilisateur
ATCOM
ATCOM D2SW Manuel utilisateur
ATCOM
ATCOM AT530P Manuel utilisateur
ATCOM
ATCOM AT-640 Manuel utilisateur
ATCOM
ATCOM AT800 Series Manuel utilisateur
ATCOM
ATCOM AT530 Manuel utilisateur
ATCOM
ATCOM AU120 Manuel utilisateur
ATCOM
ATCOM 5520 Manuel utilisateur
ATCOM
ATCOM AT800 Series Manuel utilisateur
ATCOM
ATCOM D2SW Manuel utilisateur
