AT&T USBConnect Quicksilver Manuel utilisateur
AT&T USBConnect
Quicksilver
Getting Started Guide
Z08_193_X_GSG_ATT_150X100_land_V2.indd 1 28-08-2008 13:19:40
2
This page is intentionally left blank
Z08_193_X_GSG_ATT_150X100_land_V2.indd 2 28-08-2008 13:19:40
3
Welcome to AT&T
Thank you for purchasing the AT&T USBConnect Quicksilver.
Please use either this Getting Started Guide or our web tutorial available at
att.com/WirelessTutorials for the most complete and up-to-date information
available for setting up your device.
Z08_193_X_GSG_ATT_150X100_land_V2.indd 3 28-08-2008 13:19:40
4
Table of Contents
What’s in the box? 5
Getting started 6
Follow the steps below 7
1. Insert the SIM Card and connect the Quicksilver 7
2. Install the software 8
3. Connect to the AT&T Network 9
AT&T Communication Manager 10
Using AT&T Communication Manager 11
Using AT&T Communication Manager for Wi-Fi 13
To use AT&T Wi-Fi service 13
To connect to other Wi-Fi networks 14
Getting to know your device 15
Reassembling the Quicksilver 16
Frequently Asked Questions 17
Finding more information 20
Z08_193_X_GSG_ATT_150X100_land_V2.indd 4 28-08-2008 13:19:41
5
What’s in the box?
Your package contains 2 items:
• AT&T USBConnect Quicksilver • Getting Started Guide
AT&T USBConnect Quicksilver
Getting Started Guide
Z08_193_X_GSG_ATT_150X100_land_V2.indd 5 28-08-2008 13:19:42
6
Getting started
To get started, you need about 15 minutes and the following:
AT&T USBConnect Quicksilver
The Quicksilver sends and receives data between your laptop and the AT&T network.
The Quicksilver includes the necessary software for your Windows laptop and
will begin to auto-install when inserted for the first time. Mac users see page 8
before installing.
SIM Card
The SIM card stores the wireless number for your Quicksilver and your subscriber infor-
mation enabling access to the AT&T network.
Follow the easy steps for Windows Vista, XP and 2000 laptops on the next page.
Warning:
The Quicksilver device should be used with the LED indicator lights facing up or to either side for best perfor-
mance and safety. If trying to use the device with the LED indicators facing down, the user should maintain a
distance of at least ½ of an inch (12,7 mm) between the device and the user’s body.
Follow the steps below
1. Insert the SIM card and connect the Quicksilver (about 2 minutes)
• Open the Quicksilver by swiveling the cap to the right or left.
• Peel away the pull tab that extends over the USB connector from the bottom of the device.
•Use the pull tab to pull the dummy SIM from the slot.
• Insert the SIM into the slot directly above the USB connector.
• The notched portion of the SIM should go into the device first and be positioned
towards the back end of the device.
• Gently push the SIM card completely into the slot until it clicks into place and is
fully inserted.
• Inserted properly
• Not inserted properly
• Insert the Quicksilver into the laptop
Z08_193_X_GSG_ATT_150X100_land_V2.indd 6 28-08-2008 13:19:43
7
Follow the steps below
1. Insert the SIM card and connect the Quicksilver (about 2 minutes)
• Open the Quicksilver by swiveling the cap to the right or left.
• Peel away the pull tab that extends over the USB connector from the bottom of the device.
•Use the pull tab to pull the dummy SIM from the slot.
• Insert the SIM into the slot directly above the USB connector.
• The notched portion of the SIM should go into the device first and be positioned
towards the back end of the device.
• Gently push the SIM card completely into the slot until it clicks into place and is
fully inserted.
• Inserted properly
• Not inserted properly
• Insert the Quicksilver into the laptop
✕
Z08_193_X_GSG_ATT_150X100_land_V2.indd 7 28-08-2008 13:19:44
8
2. Install the software (about 10 minutes)
Windows Vista, XP and 2000
AT&T Communication Manager (ACM) supports laptops with Microsoft Windows Vista, XP and 2000 and allows
you to control how and when you connect to wireless networks. ACM will auto-install the first time you insert
your Quicksilver into your laptop and then be available whenever needed.
• Carefully push the Quicksilver into the USB port on your laptop.
• After you insert the Quicksilver into a laptop for the first time, the ACM software will automatically start and
guide you through the installation process.
• Once installation is complete, restart your laptop when prompted.
Mac OS
When Quicksilver is inserted into your Mac power book, it will automatically install the GlobeTrotter Connect
(GT Connect).
Requires Mac OS Versions: 10.3.9, 10.4.11, 10.5 and above
• Check the version of your Mac OS before you install GT Connect.
• Carefully insert the Quicksilver into the USB port on your Mac book.
• After you insert the Quicksilver into the Mac book for the first time, GT-Connect will automatically start and
guide you through the installation process.
Z08_193_X_GSG_ATT_150X100_land_V2.indd 8 28-08-2008 13:19:44
9
3. Connect to the AT&T Network (about 3 minutes)
Windows Vista, XP and 2000
• Double click on the ACM icon on your desktop.
• Wait while the Quicksilver initializes.
• Click the Connect button when it turns orange.
• Open your browser and access the Internet.
• Once connected, the “Connect” button will change to “Disconnect” to allow you to end
your session.
Mac OS
• Double click on the GlobeTrotter Connect icon on your desktop.
• Wait while the Quicksilver initializes.
• Click the Connect button when it is active.
• Open your browser and access the Internet.
• Once connected, the “Connect” button will change to “Disconnect”
to allow you to end your session.
Z08_193_X_GSG_ATT_150X100_land_V2.indd 9 28-08-2008 13:19:44
10
AT&T Communication Manager
Communication Manager is a software application that lets you control your connections to either the AT&T
mobile network nationwide using the Quicksilver or to available Wi-Fi networks including thousands of AT&T
Wi-Fi hotspots using your laptop’s built in Wi-Fi capability. ACM offers tools to manage those connections, find
the best connection available and make that connection quickly. Please note that connections to the AT&T
mobile network and AT&T hotspots require that Quicksilver be inserted into the laptop and that the device has
an active SIM and a valid rate plan.
1Use GSM
Mobile Network
2Use WiFi
Network
33G Indicator
4Signal Strength Indicator
5Carrier Indicator
6Text Messages
7VPN Connection
8Connection Status Indicator
9Click here to
Connect / Disconnect
Z08_193_X_GSG_ATT_150X100_land_V2.indd 10 28-08-2008 13:19:45
Table des matières
Autres manuels AT&T Matériel informatique
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
