Asus P8B-E/4L Manuel utilisateur

Motherboard

P8B-E/4L

E6293

First Edition V1

January 2011

No part of this manual, including the products and software described in it, may be reproduced, transmitted,

transcribed, stored in a retrieval system, or translated into any language in any form or by any means,

except documentation kept by the purchaser for backup purposes, without the express written permission

of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless

such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the

product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,

LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),

EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY

DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND

SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY

OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL,

INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered trademarks or

copyrights of their respective companies, and are used only for identication or explanation and to the

owners’ benet, without intent to infringe.

iii

Contents

Notices........................................................................................................ vii

Safety information .................................................................................... viii

About this guide ......................................................................................... ix

 ............................................................ xi

Chapter 1: Product introduction

1.1 Welcome! ...................................................................................... 1-3

1.2 Package contents......................................................................... 1-3

1.3 Serial number label...................................................................... 1-4

1.4 Special features............................................................................ 1-4

1.4.1 Product highlights ........................................................... 1-4

1.4.2 Innovative ASUS features ............................................... 1-6

Chapter 2: Hardware information

2.1 Before you proceed ..................................................................... 2-3

2.2 Motherboard overview................................................................. 2-5

2.2.1 Placement direction ........................................................ 2-5

2.2.2 Screw holes .................................................................... 2-5

2.2.3 Motherboard layout ......................................................... 2-6

2.2.4 Layout contents............................................................... 2-7

2.3 Central Processing Unit (CPU) ................................................... 2-9

2.3.1 Installing the CPU ........................................................... 2-9

2.3.2 Installing the CPU heatsink and fan.............................. 2-12

2.3.3 Uninstalling the CPU heatsink and fan ......................... 2-13

2.3.4 Installing the CPU heatsink in rack ............................... 2-14

2.4 System memory ......................................................................... 2-15

2.4.1 Overview ....................................................................... 2-15

2.4.2 Memory Congurations................................................. 2-15

2.4.3 Installing a DIMM .......................................................... 2-16

2.4.4 Removing a DIMM ........................................................ 2-16

2.5 Expansion slots.......................................................................... 2-17

2.5.1 Installing an expansion card ......................................... 2-17

2.5.2 Conguring an expansion card ..................................... 2-17

2.5.3 Interrupt assignments ................................................... 2-18

2.5.4 PCI Express x8 slot (x4 link) ......................................... 2-19

2.5.5 PCI Express x16 slots (x16 link; x8 link) ....................... 2-19

Contents

2.5.6 PCI slots........................................................................ 2-19

2.5.7 PIKE slot ....................................................................... 2-19

2.5.8 Installing an ASUS PIKE RAID card ............................. 2-20

2.5.9 Installing ASMB5 management card............................. 2-21

2.5.10 Connecting the thermal sensor cable ........................... 2-21

2.6 Jumpers ...................................................................................... 2-22

2.7 Connectors ................................................................................. 2-28

2.7.1 Rear panel connectors.................................................. 2-28

2.7.2 Internal connectors ....................................................... 2-29

Chapter 3: Powering up

 ........................................................ 3-3

3.2 Powering off the computer.......................................................... 3-4

3.2.1 Using the OS shut down function.................................... 3-4

3.2.2 Using the dual function power switch.............................. 3-4

Chapter 4: BIOS setup

4.1 Managing and updating your BIOS ............................................ 4-3

4.1.1 ASUS CrashFree BIOS 3 utility ...................................... 4-3

4.1.2 ASUS EZ Flash Utility ..................................................... 4-4

4.1.3 BUPDATER utility............................................................ 4-5

4.2 BIOS setup program .................................................................... 4-7

4.2.1 BIOS menu screen.......................................................... 4-8

4.2.2 Menu bar......................................................................... 4-8

4.2.3 Menu items ..................................................................... 4-9

4.2.4 Submenu items ............................................................... 4-9

4.2.5 Navigation keys............................................................... 4-9

4.2.6 General help ................................................................... 4-9

4.2.7 Conguration elds ......................................................... 4-9

4.2.8 Pop-up window ............................................................... 4-9

4.2.9 Scroll bar......................................................................... 4-9

4.3 Main menu .................................................................................. 4-10

4.3.1 System Date ................................................................. 4-10

4.3.2 System Time ................................................................. 4-10

4.3.3 Security ......................................................................... 4-10

4.4 Event Logs menu ....................................................................... 4-12

Contents

4.5 Advanced menu ......................................................................... 4-14

4.5.1 ACPI Settings................................................................ 4-14

4.5.2 Trusted Computing........................................................ 4-15

4.5.3 WHEA Conguration ..................................................... 4-15

4.5.4 CPU Conguration ........................................................ 4-16

4.5.5 North Bridge.................................................................. 4-18

4.5.6 South Bridge ................................................................. 4-18

4.5.7 SATA Conguration ....................................................... 4-19

4.5.8 Intel TXT(LT) Conguration........................................... 4-20

4.5.9 USB Conguration ........................................................ 4-20

4.5.10 ME Subsystem.............................................................. 4-21

4.5.11 Onboard Devices Conguration.................................... 4-21

4.5.12 APM .............................................................................. 4-23

4.5.13 Serial Port Console Redirection.................................... 4-24

4.5.14 Network Stack............................................................... 4-25

4.6 Monitor menu ............................................................................. 4-26

4.7 Boot menu .................................................................................. 4-27

4.8 Tool menu ................................................................................... 4-29

4.9 Exit menu.................................................................................... 4-29

 n

5.1 Setting up RAID............................................................................ 5-3

5.1.1 RAID denitions .............................................................. 5-3

5.1.2 Installing hard disk drives................................................ 5-4

5.1.3 Setting the RAID item in BIOS ........................................ 5-4

5.1.4 RAID conguration utilities.............................................. 5-4

  .................................... 5-5

5.2.1 Creating a RAID set ........................................................ 5-6

5.2.2 Adding or viewing a RAID conguration ....................... 5-12

5.2.3 Initializing the virtual drives ........................................... 5-13

5.2.4 Rebuilding failed drives................................................. 5-17

5.2.5 Checking the drives for data consistency ..................... 5-19

5.2.6 Deleting a RAID conguration....................................... 5-22

5.2.7 Selecting the boot drive from a RAID set...................... 5-23

5.2.8 Enabling WriteCache .................................................... 5-24

Contents

5.3 Intel®Rapid Storage Technology Option ROM Utility............. 5-25

5.3.1 Creating a RAID set ...................................................... 5-26

5.3.2 Creating a Recovery set ............................................... 5-27

5.3.3 Deleting a RAID set ...................................................... 5-29

5.3.4 Resetting disks to Non-RAID ........................................ 5-30

5.3.5 Recovery Volume Options ............................................ 5-31

5.3.6 Exiting the Intel®Rapid Storage Technology utility........ 5-32

5.3.7 Rebuilding the RAID ..................................................... 5-32

5.3.8 Setting the Boot array in the BIOS Setup Utility............ 5-34

Chapter 6: Driver installation

6.1 RAID driver installation ............................................................... 6-3

6.1.1 Creating a RAID driver disk ............................................ 6-3

6.1.2 Installing the RAID controller driver ................................ 6-6

6.2 Intel®chipset device software installation............................... 6-14

6.3 LAN driver installation............................................................... 6-16

6.4 VGA driver installation............................................................... 6-19

6.5 Management applications and utilities installation ................ 6-22

6.5.1 Running the support DVD ............................................. 6-22

6.5.2 Drivers menu................................................................. 6-22

6.5.3 Utilities menu ................................................................ 6-23

6.5.4 Make disk menu............................................................ 6-23

6.5.5 Contact information....................................................... 6-23

Appendix: Reference information

A.1 P8B-E/4L block diagram ..............................................................A-3

vii

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the

following two conditions:

• This device may not cause harmful interference, and

• This device must accept any interference received including interference that

may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class

B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed

to provide reasonable protection against harmful interference in a residential

installation. This equipment generates, uses and can radiate radio frequency energy

and, if not installed and used in accordance with manufacturer’s instructions, may

cause harmful interference to radio communications. However, there is no guarantee

that interference will not occur in a particular installation. If this equipment does

cause harmful interference to radio or television reception, which can be determined

by turning the equipment off and on, the user is encouraged to try to correct the

interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment to an outlet on a circuit different from that to which the

receiver is connected.

• Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise emissions

from digital apparatus set out in the Radio Interference Regulations of the

Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

The use of shielded cables for connection of the monitor to the graphics card is

required to assure compliance with FCC regulations. Changes or modications

to this unit not expressly approved by the party responsible for compliance could

void the user’s authority to operate this equipment.

REACH

Complying with the REACH (Registration, Evaluation, Authorization, and Restriction

of Chemicals) regulatory framework, we publish the chemical substances in our

products at ASUS REACH website at http://csr.asus.com/english/REACH.htm.

viii

Safety information

Electrical safety

• To prevent electrical shock hazard, disconnect the power cable from the

electrical outlet before relocating the system.

• When adding or removing devices to or from the system, ensure that the

power cables for the devices are unplugged before the signal cables are

connected. If possible, disconnect all power cables from the existing system

before you add a device.

• Before connecting or removing signal cables from the motherboard, ensure

that all power cables are unplugged.

• Seek professional assistance before using an adapter or extension cord.

These devices could interrupt the grounding circuit.

• Make sure that your power supply is set to the correct voltage in your area.

If you are not sure about the voltage of the electrical outlet you are using,

contact your local power company.

• If the power supply is broken, do not try to x it by yourself. Contact a

qualied service technician or your retailer.

Operation safety

• Before installing the motherboard and adding devices on it, carefully read all

the manuals that came with the package.

• Before using the product, make sure all cables are correctly connected and the

power cables are not damaged. If you detect any damage, contact your dealer

immediately.

• To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

• Avoid dust, humidity, and temperature extremes. Do not place the product in

any area where it may become wet.

• Place the product on a stable surface.

• If you encounter technical problems with the product, contact a qualied

service technician or your retailer.

DO NOT throw the motherboard in municipal waste. This product has been

designed to enable proper reuse of parts and recycling. This symbol of the

crossed out wheeled bin indicates that the product (electrical and electronic

equipment) should not be placed in municipal waste. Check local regulations for

disposal of electronic products.

DO NOT throw the mercury-containing button cell battery in municipal waste.

This symbol of the crossed out wheeled bin indicates that the battery should not

be placed in municipal waste.

About this guide

This user guide contains the information you need when installing and conguring

the motherboard.

How this guide is organized

This user guide contains the following parts:

• Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new

technologies it supports.

• Chapter 2: Hardware information

This chapter lists the hardware setup procedures that you have to perform

when installing system components. It includes description of the switches,

jumpers, and connectors on the motherboard.

• Chapter 3: Powering up

This chapter describes the power up sequence and ways of shutting down

the system.

• Chapter 4: BIOS setup

This chapter tells how to change system settings through the BIOS Setup

menus. Detailed descriptions of the BIOS parameters are also provided.

 

This chapter provides instructions for setting up, creating, and conguring

RAID sets using the available utilities.

• Chapter 6: Driver installation

This chapter provides instructions for installing the necessary drivers for

different system components.

• Appendix: Reference information

This appendix includes additional information that you may refer to when

conguring the motherboard.



Refer to the following sources for additional information and for product and

software updates.

1. ASUS websites

The ASUS website provides updated information on ASUS hardware and

software products. Refer to the ASUS contact information.

2. Optional documentation

Your product package may include optional documentation, such as warranty

yers, that may have been added by your dealer. These documents are not

part of the standard package.

Conventions used in this guide

To make sure that you perform certain tasks properly, take note of the following

symbols used throughout this manual.

Typography

Bold text Indicates a menu or an item to select.

Italics Used to emphasize a word or a phrase.

<Key> Keys enclosed in the less-than and greater-

than sign means that you must press the

enclosed key.

Example: <Enter> means that you must press

the Enter or Return key.

<Key1+Key2+Key3> If you must press two or more keys

simultaneously, the key names are linked with

a plus sign (+).

Example: <Ctrl+Alt+Del>

Command Means that you must type the command

exactly as shown, then supply the required

item or value enclosed in brackets.

Example: At the DOS prompt, type the

command line: format A:/S

DANGER/WARNING: Information to prevent injury to yourself

when trying to complete a task.

CAUTION: Information to prevent damage to the components

when trying to complete a task.

NOTE: Tips and additional information to help you complete a

task.

IMPORTANT: Instructions that you MUST follow to complete a

task.

Autres manuels pour P8B-E/4L

Table des matières

Autres manuels Asus Carte mère

Asus

Asus AAEON UP Xtreme i11 Manuel utilisateur

Asus

Asus H81M-E Manuel utilisateur

Asus

Asus MAXIMUS VIII EXTREME Manuel utilisateur

Asus

Asus P5RD2-VM Manuel utilisateur

Asus

Asus A8AE-LE Amberine Manuel utilisateur

Asus

Asus A7N8X-VM 400 Manuel utilisateur

Asus

Asus Motherboard P5LD2 Manuel utilisateur

Asus

Asus A7V266 Manuel utilisateur

Asus

Asus M2N32-SLI PREMIUM VISTA Manuel utilisateur

Asus

Asus P4S333 Manuel utilisateur

Asus

Asus TUF Z270 MARK 2 Manuel utilisateur

Asus

Asus Maximus V GENE Manuel utilisateur

Asus

Asus Prime J4005I-C Manuel utilisateur

Asus

Asus A55BM-K Manuel utilisateur

Asus

Asus KFSN4 DRE IKVM - Motherboard - SSI EEB 3.61 Manuel utilisateur

Asus

Asus P6T SE - Motherboard - ATX Manuel utilisateur

Asus

Asus B150M-A/M.2 Manuel utilisateur

Asus

Asus F1A75-V PRO Manuel utilisateur

Asus

Asus ROG STRIX X370-I Manuel utilisateur

Asus

Asus P5GC MX 1333 - Motherboard - Micro ATX Manuel utilisateur

Asus

Asus M4A87T PLUS Manuel utilisateur

Asus

Asus A88XM-E/USB 3.1 Manuel utilisateur

Asus

Asus P4B266 Manuel utilisateur

Asus

Asus M3N78-VM - Motherboard - Micro ATX Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuel utilisateur

Epson

Epson S5U13700P00C000 Manuel utilisateur

Gigabyte

Gigabyte GA-K8N Ultra-SLI Manuel utilisateur

Albatron

Albatron PX925XE Series Manuel utilisateur