Asus NCCH-DR Manuel utilisateur

Motherboard

NCCH-DR

Series

iiii

E1679E1679

E1679

First Edition V1First Edition V1

First Edition V1

August 2004August 2004

August 2004

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form

or by any means, except documentation kept by the purchaser for backup purposes, without the

express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or

altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2)

the serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER

EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES

OR CONDITIONS OF MERCHANTABILITY OR FITNESS FORA PARTICULAR PURPOSE.

IN NO EVENT SHALLASUS, ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE

LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES

(INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS OF BUSINESS, LOSS OF USE

OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS HAS BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR

ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUALARE FURNISHED

FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGEATANY TIME

WITHOUT NOTICE,AND SHOULD NOT BE CONSTRUED AS A COMMITMENT BYASUS.

ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ERRORS OR

INACCURACIES THAT MAYAPPEAR IN THIS MANUAL, INCLUDING THE PRODUCTS

AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identification or

explanation and to the owners’ benefit, without intent to infringe.

iiiiii

iii

Contents

Notices ................................................................................................ vi

Safety information ............................................................................. vii

About this guide ............................................................................... viii

Typography ......................................................................................... ix

NCCH-DR Series specifications summary ............................................. x

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

1.1 Welcome! .............................................................................. 1-1

1.2 Package contents ................................................................. 1-1

1.3 Special features .................................................................... 1-2

1.3.1 Product highlights................................................... 1-2

1.3.2 Innovative ASUS features ....................................... 1-4

Chapter 2: Hardware informationChapter 2: Hardware information

Chapter 2: Hardware information

2.1 Before you proceed .............................................................. 2-1

2.2 Motherboard overview .......................................................... 2-2

2.2.1 Placement direction ................................................ 2-2

2.2.2 Screw holes ............................................................ 2-2

2.2.3 CPU heatsink weight support ................................. 2-3

2.2.4 Motherboard layout ................................................ 2-9

2.2.5 Layout contents ................................................... 2-11

2.3 Central Processing Unit (CPU) ............................................ 2-13

2.3.1 Installling the CPU ................................................. 2-13

2.3.2 Installing the CPU heatsink(s) ............................... 2-15

2.4 System memory ................................................................. 2-16

2.4.1 Overview ............................................................... 2-16

2.4.2 Memory configurations ......................................... 2-16

2.4.3 Installing a DIMM ................................................... 2-18

2.4.4 Removing a DIMM ................................................. 2-18

2.5 Expansion slots ................................................................... 2-19

2.5.1 Installing an expansion card .................................. 2-19

2.5.2 Configuring an expansion card.............................. 2-19

2.5.3 Interrupt assignments .......................................... 2-20

2.5.4 PCI/PCI-X slots ...................................................... 2-20

2.6. Jumpers .............................................................................. 2-21

2.7 Connectors ......................................................................... 2-26

2.7.1 Rear panel connectors .......................................... 2-26

2.7.2 Internal connectors............................................... 2-27

iviv

Contents

Chapter 3: Powering upChapter 3: Powering up

Chapter 3: Powering up

3.1 Starting up for the first time................................................ 3-1

3.2 Powering off the computer .................................................. 3-2

3.2.1 Using the OS shut down function ........................... 3-2

3.2.2 Using the dual function power switch .................... 3-2

Chapter 4: BIOS SetupChapter 4: BIOS Setup

Chapter 4: BIOS Setup

4.1 Managing and updating your BIOS ........................................ 4-1

4.1.1 Creating a bootable floppy disk .............................. 4-1

4.1.2 AwardBIOS Flash Utility .......................................... 4-3

4.1.3 ASUS CrashFree BIOS 2 utility ................................ 4-7

4.1.4 ASUS EZ Flash utility .............................................. 4-9

4.1.5 ASUS Update utility .............................................. 4-10

4.2 BIOS Setup program ........................................................... 4-13

4.2.1 BIOS menu screen ................................................. 4-14

4.2.2 Menu bar ............................................................... 4-14

4.2.3 Navigation keys .................................................... 4-14

4.2.4 General help .......................................................... 4-15

4.2.5 Sub-menu ............................................................. 4-15

4.2.6 Scroll bar .............................................................. 4-15

4.2.7 Pop-up window ..................................................... 4-15

4.3 Main menu .......................................................................... 4-16

4.3.1 Primary IDE Master ............................................... 4-17

4.3.2 Primary IDE Slave .................................................. 4-19

4.3.3 Secondary IDE Master ........................................... 4-19

4.3.4 Secondary IDE Slave ............................................. 4-19

4.4 Advanced menu .................................................................. 4-20

4.4.1 Advanced BIOS Features ...................................... 4-21

4.4.2 CPU Configuration ................................................. 4-22

4.4.3 Memory Configuration .......................................... 4-23

4.4.4 Chipset ................................................................. 4-24

4.4.5 Onboard Device .................................................... 4-25

4.4.6 PCIPnP ................................................................... 4-29

4.4.7 USB Configuration ................................................. 4-31

4.5 Power menu ........................................................................ 4-32

4.5.1 APM Configuration ................................................ 4-33

4.5.2 Hardware Monitor ................................................. 4-36

Contents

4.6 Boot menu .......................................................................... 4-38

4.6.1 Boot Device Priority .............................................. 4-38

4.6.2 Hard Disk Boot Priority ......................................... 4-39

4.6.3 Removable Device Priority .................................... 4-39

4.6.4 CD-ROM Boot Priority ........................................... 4-40

4.6.5 Boot Settings Configuration ................................. 4-40

4.6.6 Security ................................................................ 4-42

4.7 Exit menu ........................................................................... 4-44

Appendix: Reference informationAppendix: Reference information

Appendix: Reference information

A.1 NCCH-DR block diagram ....................................................... A-1

vivi

Notices

Federal Communications Commission StatementFederal Communications Commission Statement

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

•

This device may not cause harmful interference, and

•

This device must accept any interference received including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

manufacturer’s instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications StatementCanadian Department of Communications Statement

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with CanadianThis class B digital apparatus complies with Canadian

This class B digital apparatus complies with Canadian

ICES-003.ICES-003.

ICES-003.

The use of shielded cables for connection of the monitor to the graphics

card is required to assure compliance with FCC regulations. Changes or

modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate

this equipment.

viivii

vii

Safety information

Electrical safetyElectrical safety

Electrical safety

•To prevent electrical shock hazard, disconnect the power cable from the

electrical outlet before relocating the system.

•When adding or removing devices to or from the system, ensure that the

power cables for the devices are unplugged before the signal cables are

connected. If possible, disconnect all power cables from the existing

system before you add a device.

•Before connecting or removing signal cables from the motherboard,

ensure that all power cables are unplugged.

•Seek professional assistance before using an adpater or extension cord.

These devices could interrupt the grounding circuit.

•Make sure that your power supply is set to the correct voltage in your

area. If you are not sure about the voltage of the electrical outlet you are

using, contact your local power company.

•If the power supply is broken, do not try to fix it by yourself. Contact a

qualified service technician or your retailer.

Operation safetyOperation safety

Operation safety

•

Before installing the motherboard and adding devices on it, carefully read

all the manuals that came with the package.

•

Before using the product, make sure all cables are correctly connected

and the power cables are not damaged. If you detect any damage,

contact your dealer immediately.

•

To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

•

Avoid dust, humidity, and temperature extremes. Do not place the

product in any area where it may become wet.

•

Place the product on a stable surface.

•

If you encounter technical problems with the product, contact a qualified

service technician or your retailer.

viiiviii

viii

About this guide

This user guide contains the information you need when installing and

configuring the motherboard.

How this guide is organizedHow this guide is organized

How this guide is organized

This manual contains the following parts:

••

•Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introductionChapter 1: Product introduction

Chapter 1: Product introduction

This chapter describes the features of the motherboard and the new

technology it supports.

••

•Chapter 2: Hardware informationChapter 2: Hardware information

Chapter 2: Hardware informationChapter 2: Hardware information

Chapter 2: Hardware information

This chapter lists the hardware setup procedures that you have to

perform when installing system components. It includes description of

the switches, jumpers, and connectors on the motherboard.

••

•Chapter 3: Powering upChapter 3: Powering up

Chapter 3: Powering upChapter 3: Powering up

Chapter 3: Powering up

This chapter describes the power up sequence, the vocal POST

messages, and ways of shutting down the system.

••

•Chapter 4: BIOS setupChapter 4: BIOS setup

Chapter 4: BIOS setupChapter 4: BIOS setup

Chapter 4: BIOS setup

This chapter tells how to change system settings through the BIOS

Setup menus. Detailed descriptions of the BIOS parameters are also

provided.

••

•Appendix: Reference informationAppendix: Reference information

Appendix: Reference informationAppendix: Reference information

Appendix: Reference information

This appendix includes additional information that you may refer to

when configuring the motherboard.

Where to find more informationWhere to find more information

Where to find more information

Refer to the following sources for additional information and for product

and software updates.

1.1.

1. ASUS websitesASUS websites

ASUS websitesASUS websites

ASUS websites

The ASUS website provides updated information on ASUS hardware

and software products. Refer to the ASUS contact information.

2.2.

2. Optional documentationOptional documentation

Optional documentationOptional documentation

Optional documentation

Your product package may include optional documentation, such as

warranty flyers, that may have been added by your dealer. These

documents are not part of the standard package.

ixix

Conventions used in this guideConventions used in this guide

Conventions used in this guide

To make sure that you perform certain tasks properly, take note of the

following symbols used throughout this manual.

Typography

Bold textBold text

Bold text Indicates a menu or an item to select.

Italics

Used to emphasize a word or a phrase.

<Key> Keys enclosed in the less-than and greater-than sign means

that you must press the enclosed key.

Example: <Enter> means that you must press the Enter or

Return key.

<Key1+Key2+Key3> If you must press two or more keys simultaneously, the

key names are linked with a plus sign (+).

Example: <Ctrl+Alt+D>

Command Means that you must type the command exactly as shown,

then supply the required item or value enclosed in

brackets.

Example: At the DOS prompt, type the command line:

afudos /i[filename]

afudos /iNCCH-SR.ROM

DANGER/WARNING:DANGER/WARNING:

DANGER/WARNING: Information to prevent injury to yourself

when trying to complete a task.

CAUTION:CAUTION:

CAUTION: Information to prevent damage to the components

when trying to complete a task.

NOTE:NOTE:

NOTE: Tips and additional information to help you complete a

task.

IMPORTANT:IMPORTANT:

IMPORTANT: Instructions that you MUST follow to complete a

task.

NCCH-DR Series specifications summary

(continued on the next page)

CPUCPU

CPU

ChipsetChipset

Chipset

Front Side BusFront Side Bus

Front Side Bus

MemoryMemory

Memory

Expansion slotsExpansion slots

Expansion slots

StorageStorage

Storage

LANLAN

LAN

USBUSB

USB

BIOS featuresBIOS features

BIOS features

Rear panelRear panel

Rear panel

Support for dual Intel

Xeon™Processors up to 4.4+ GHz

with Hyper-Threading Technology

Support for Extended Memory 64-bit Technology (EM64T)

On-die 1MB L2 cache

North bridge: Intel

E7210 Memory Controller Hub (MCH)

South bridge: Intel

6300ESB I/O Controller Hub (ICH)

800 MHz

Dual-channel memory architecture

4 x 184-pin DDR DIMM sockets for up to 4GB memory

Supports PC3200/PC2700 unbuffered ECC or non-ECC

DDR DIMMs

1 x PCI-X 66 MHz/64-bit slot (supports ZCR, PCI-X 1.0)

1 x PCI-X 66 MHz/64-bit slot (PCI-X 1.0)

3 x PCI 33 MHz/32-bit slot (PCI 2.3)

IDE modelIDE model

IDE model

Intel

6300ESB South Bridge supports:

- 2 x UltraDMA100/66/33

- 2 x Serial ATA 150 connectors that support

RAID 0, RAID 1 configurations, and the Intel

Matrix

Storage Technology

SATA modelSATA model

SATA model

IDE model storage + Adaptec

AIC-8130 PCI-X SATA-II

controller that supports:

- 4 x SATA-II connectors (300 Mbps)

- RAID 0, RAID 1, or RAID 0+1 configurations

- Zero-Channel RAID (optional)

Intel

PRO/1000 CT Network Connection (82547GI)

Intel

PRO/1000 MT Network Connection (82541GI)

USB 2.0 (480 Mbps) / 1.1 (12 Mbps)

8Mb Flash ROM, Award BIOS, PnP, DMI, WfM2.0,

SM BIOS2.3

1 x PS/2 keyboard port

1 x PS/2 mouse port

2 x USB 2.0 ports

1 x Serial port

1 x Video port

2 x Gigabit LAN (RJ-45) ports

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Asus Carte mère

Asus

Asus TUF B365-PLUS GAMING Manuel utilisateur

Asus

Asus J1800I-C/BR Manuel utilisateur

Asus

Asus A88XM-E Manuel utilisateur

Asus

Asus PREMIUM P5N72-T Manuel utilisateur

Asus

Asus TUF GAMING B760M-PLUS WIFI D4 Manuel utilisateur

Asus

Asus P8B-X Manuel utilisateur

Asus

Asus PRIME Z790M-PLUS Manuel utilisateur

Asus

Asus Maximus IV GENE-Z/GEN3 Manuel utilisateur

Asus

Asus P4GD1 Manuel utilisateur

Asus

Asus PRIME H610M2 FPT Manuel utilisateur

Asus

Asus P5KPL IPC/SI Manuel utilisateur

Asus

Asus P5KPL EPU Manuel utilisateur

Asus

Asus KFN4-D16 1U Manuel utilisateur

Asus

Asus TUF H370-PRO GAMING Manuel utilisateur

Asus

Asus prime B250M-K Manuel utilisateur

Asus

Asus Z8PE-D18 - Motherboard - SSI EEB 3.61 Manuel utilisateur

Asus

Asus P9X79 LE Manuel utilisateur

Asus

Asus B85M-E/DASH Mode d’emploi

Asus

Asus A55BM-K Manuel utilisateur

Asus

Asus H310I-IM-A R2.0 Manuel utilisateur

Asus

Asus PRIME X299-Deluxe Series Manuel utilisateur

Asus

Asus CUV4X-CME Manuel utilisateur

Asus

Asus P8H77-V LE Manuel utilisateur

Asus

Asus K7V-T Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuel utilisateur

Epson

Epson S5U13700P00C000 Manuel utilisateur

Gigabyte

Gigabyte GA-K8N Ultra-SLI Manuel utilisateur

Albatron

Albatron PX925XE Series Manuel utilisateur