Asus M2R-FVM Manuel utilisateur

Motherboard

M2R-FVM

E2614

First Edition

May 2006

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form

or by any means, except documentation kept by the purchaser for backup purposes, without the

express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modiﬁed or

altered, unless such repair, modiﬁcation of alteration is authorized in writing by ASUS; or (2) the

serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS

OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS,

ITS DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS

OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR

ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND

SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY

OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL,

INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identiﬁcation or

explanation and to the ownersʼ beneﬁt, without intent to infringe.

iii

Contents

Notices ............................................................................................... vii

Safety information .............................................................................viii

About this guide .................................................................................. ix

M2R-FVM speciﬁcations summary ....................................................... xi

Chapter 1: Product introduction

1.1 Welcome! .............................................................................. 1-1

1.2 Package contents ................................................................. 1-1

1.3 Special features .................................................................... 1-2

1.3.1 Product highlights ................................................... 1-2

1.3.2 Innovative ASUS features ...................................... 1-4

1.4 Before you proceed .............................................................. 1-5

1.5 Motherboard overview .......................................................... 1-6

1.5.1 Placement direction ................................................ 1-6

1.5.2 Screw holes ............................................................. 1-6

1.5.3 Motherboard layout ................................................ 1-7

1.5.4 Layout contents ..................................................... 1-8

1.6 Central Processing Unit (CPU) .............................................. 1-9

1.6.1 Installing the CPU .................................................... 1-9

1.6.2 Installing the heatsink and fan .............................. 1-11

1.7 System memory .................................................................. 1-14

1.7.1 Overview ............................................................... 1-14

1.7.2 Memory conﬁgurations ......................................... 1-15

1.7.3 Installing a DIMM ................................................... 1-16

1.7.4 Removing a DIMM .................................................. 1-16

1.8 Expansion slots ................................................................... 1-17

1.8.1 Installing an expansion card .................................. 1-17

1.8.2 Conﬁguring an expansion card .............................. 1-17

1.8.3 Interrupt assignments ........................................... 1-18

1.8.4 PCI slots ................................................................ 1-18

1.8.5 PCI Express x1 slot ............................................... 1-19

1.8.6 PCI Express x16 slot ............................................. 1-19

Contents

1.9 Jumpers .............................................................................. 1-20

1.10 Connectors ......................................................................... 1-23

1.10.1 Rear panel connectors .......................................... 1-23

1.10.2 Internal connectors ............................................... 1-24

Chapter 2: BIOS setup

2.1 Managing and updating your BIOS ........................................ 2-1

2.1.1 Creating a bootable ﬂoppy disk .............................. 2-1

2.1.2 ASUS EZ Flash 2 utility ............................................ 2-2

2.1.3 Award BIOS Flash Utility .......................................... 2-3

2.1.4 Saving the current BIOS ﬁle .................................... 2-5

2.1.5 ASUS CrashFree BIOS 2 utility ................................ 2-6

2.2 BIOS setup program .............................................................. 2-7

2.2.1 BIOS menu screen ................................................... 2-8

2.2.2 Menu bar ................................................................. 2-8

2.2.3 Legend bar .............................................................. 2-9

2.2.4 Menu items ............................................................. 2-9

2.2.5 Sub-menu items ...................................................... 2-9

2.2.6 Conﬁguration ﬁelds ................................................. 2-9

2.2.7 Pop-up window ...................................................... 2-10

2.2.8 General help .......................................................... 2-10

2.3 Main menu ........................................................................... 2-11

2.3.1 System Time ........................................................ 2-11

2.3.2 System Date ......................................................... 2-11

2.3.3 Legacy Diskette A ............................................... 2-11

2.3.4 Primary IDE Master/Slave ...................................... 2-12

2.3.6 SATA1, 2, 3 .........................................................................2-14

Contents

2.3.7 Installed Memory ................................................... 2-15

2.4 Advanced menu .................................................................. 2-15

2.4.1 JumperFree Conﬁguration ..................................... 2-16

2.4.2 Chipset .................................................................. 2-16

2.4.3 PCIPnP ................................................................... 2-18

2.4.4 Onboard Device Conﬁguration .............................. 2-20

2.5 Power menu ........................................................................ 2-23

2.5.1 ACPI Suspend Type ............................................... 2-23

2.5.2 ACPI APIC Support ................................................ 2-23

2.5.3 APM Conﬁguration ................................................ 2-24

2.5.4 Hardware Monitor .................................................. 2-25

2.6 Boot menu .......................................................................... 2-26

2.6.1 Boot Device Priority .............................................. 2-26

2.6.2 Boot Settings Conﬁguration ................................ 2-27

2.6.3 Security ................................................................. 2-28

2.7 Exit menu ............................................................................ 2-29

Notices

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

•

This device may not cause harmful interference, and

•

This device must accept any interference received including

interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits

are designed to provide reasonable protection against harmful interference

in a residential installation. This equipment generates, uses and can radiate

radio frequency energy and, if not installed and used in accordance with

manufacturerʼs instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will

not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with Canadian ICES-003.

The use of shielded cables for connection of the monitor to the graphics

card is required to assure compliance with FCC regulations. Changes

or modiﬁcations to this unit not expressly approved by the party

responsible for compliance could void the userʼs authority to operate

this equipment.

vii

Safety information

Electrical safety

•

To prevent electrical shock hazard, disconnect the power cable from

the electrical outlet before relocating the system.

•

When adding or removing devices to or from the system, ensure that

the power cables for the devices are unplugged before the signal

cables are connected. If possible, disconnect all power cables from the

existing system before you add a device.

•

Before connecting or removing signal cables from the motherboard,

ensure that all power cables are unplugged.

•

Seek professional assistance before using an adpater or extension

cord. These devices could interrupt the grounding circuit.

•

Make sure that your power supply is set to the correct voltage in your

area. If you are not sure about the voltage of the electrical outlet you

are using, contact your local power company.

•

If the power supply is broken, do not try to fix it by yourself. Contact

a qualified service technician or your retailer.

Operation safety

•

Before installing the motherboard and adding devices on it, carefully

read all the manuals that came with the package.

•

Before using the product, make sure all cables are correctly connected

and the power cables are not damaged. If you detect any damage,

contact your dealer immediately.

•

To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

•

Avoid dust, humidity, and temperature extremes. Do not place the

product in any area where it may become wet.

•

Place the product on a stable surface.

•

If you encounter technical problems with the product, contact a

qualified service technician or your retailer.

viii

About this guide

This user guide contains the information you need when installing and

conﬁguring the motherboard.

How this guide is organized

This guide contains the following parts:

• Chapter 1: Product introduction

This chapter describes the features of the motherboard and the

new technology it supports. This chapter also lists the hardware

setup procedures that you have to perform when installing system

components. It includes description of the switches, jumpers, and

connectors on the motherboard.

• Chapter 2: BIOS setup

This chapter tells how to change system settings through the BIOS

Setup menus. Detailed descriptions of the BIOS parameters are also

provided.

Where to find more information

Refer to the following sources for additional information and for product

and software updates.

1. ASUS websites

The ASUS website provides updated information on ASUS hardware

and software products. Refer to the ASUS contact information.

2. Optional documentation

Your product package may include optional documentation, such as

warranty ﬂyers, that may have been added by your dealer. These

documents are not part of the standard package.

Conventions used in this guide

To make sure that you perform certain tasks properly, take note of the

following symbols used throughout this manual.

Typography

Bold text Indicates a menu or an item to select.

Italics

Used to emphasize a word or a phrase.

<Key> Keys enclosed in the less-than and greater-than

sign means that you must press the enclosed key.

Example: <Enter> means that you must press the

Enter or Return key.

<Key1>+<Key2>+<Key3>If you must press two or more keys

simultaneously, the key names are connected

with a plus sign (+).

Example: <Ctrl>+<Alt>+<Del>

Command Means that you must type the command exactly

as shown, then supply the required item or value

enclosed in brackets.

Example: At the DOS prompt, type the command

line:

afudos /i[ﬁlename]

afudos /iM2R-FVM.bin

DANGER/WARNING: Information to prevent injury to yourself

when trying to complete a task.

CAUTION: Information to prevent damage to the components

when trying to complete a task.

NOTE: Tips and additional information to help you complete a

task.

IMPORTANT: Instructions that you MUST follow to complete a

task.

M2R-FVM speciﬁcations summary

(continued on the next page)

CPU Socket AM2 for AMD Athlon™ 64 X2 /AMD Athlon™ 64

/AMD Sempron™ processors

Supports AMD Cool ‘n’ Quiet™ Technology

AMD64 architecture enables simultaneous 32-bit and

64-bit computing

Chipset ATI® RS485

ATI® SB600

HT Frequency 800 MHz /1GHz

Memory Dual-channel memory architecture

- 4 x 240-pin DIMM sockets support unbuffered

DDR2 667/533 MHz memory modules

- Supports up to 2GB system memory with dual-

channel memory

Expansion slots 1 x PCI Express™ x16 slots

1 x PCI Express™ x1 slots

2 x PCI 2.2 slots

Storage South Bridge SB600 supports:

- 1 x IDE connector for up to two Ultra DMA

133/100/66/33 devices

- 4 x Serial ATA connectors support four

Serial ATA devices

- RAID 0, RAID1 and RAID 0+1founctions

Audio Realtek® ALC883 8-channel Azalia CODEC

Supports Jack-Sensing & Enumeration Technology

Supports S/PDIF out interface

IEEE 1394 T1 1394 controller supports:

- 1 x IEEE 1394a connector

USB Supports up to 8 USB 2.0/1.1 ports

Form factor uATX form factor: 9.6 in x 9.6 in (24.5 cm x 24.5 cm)

LAN Realtek® RTL8100C 10/100M LAN controller

Special features - ASUS CrashFree BIOS 2

- ASUS EZ Flash

- ASUS Q-fan1.5

- ASUS MyLogo2

- Dram Burnt proof

Rear panel 1 x Serial (COM1) port

1 x VGA port

1 x S/PDIF Out port

1 x 1394 port

1 x LAN (RJ-45) port

4 x USB 2.0/1.1 ports

8-channel audio ports

Autres manuels pour M2R-FVM

Table des matières

Autres manuels Asus Carte mère

Asus

Asus P5BV - Motherboard - ATX Manuel utilisateur

Asus

Asus M4N68T LE V2 Manuel utilisateur

Asus

Asus KFSN4 DRE IKVM - Motherboard - SSI EEB 3.61 Manuel utilisateur

Asus

Asus P2B-D Manuel utilisateur

Asus

Asus ROG STRIX X370-F GAMING Manuel utilisateur

Asus

Asus SK8N Manuel utilisateur

Asus

Asus P5N32-SLI SE DELUXE Manuel utilisateur

Asus

Asus F2A85-M/CSM Manuel utilisateur

Asus

Asus TUV4X Manuel utilisateur

Asus

Asus KN97 Manuel utilisateur

Asus

Asus A7V600-F/S Manuel utilisateur

Asus

Asus PRIME A320M-A Manuel utilisateur

Asus

Asus Aaeon UP Squared i12 Manuel utilisateur

Asus

Asus STRIX Z270H Gaming Manuel utilisateur

Asus

Asus P8H61-M LX PLUS R2.0 Manuel utilisateur

Asus

Asus P5VDC-X Manuel utilisateur

Asus

Asus B85M-D Manuel utilisateur

Asus

Asus SABERTOOTH Z97 MARK 1 Manuel utilisateur

Asus

Asus PRIME A520M-E Manuel utilisateur

Asus

Asus P5L-MX IPAT Manuel utilisateur

Asus

Asus A8N-E Instructions générales

Asus

Asus H87M-E Manuel utilisateur

Asus

Asus B150M-A/M.2 Manuel utilisateur

Asus

Asus Z87I-DELUXE Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuel utilisateur

Epson

Epson S5U13700P00C000 Manuel utilisateur

Gigabyte

Gigabyte GA-K8N Ultra-SLI Manuel utilisateur

Albatron

Albatron PX925XE Series Manuel utilisateur