Asus M2NBP-VM CSM Manuel utilisateur
Motherboard
M2NBP-VM CSM
ii
Copyright © 2006 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and software described in it, may be reproduced, transmitted,
transcribed, stored in a retrieval system, or translated into any language in any form or by any means,
except documentation kept by the purchaser for backup purposes, without the express written permission
of ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired, modied or altered, unless
such repair, modication of alteration is authorized in writing by ASUS; or (2) the serial number of the
product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS
OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS
DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,
INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS,
LOSS OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE),
EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY
DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR
INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND
SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY
OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL,
INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be registered trademarks or
copyrights of their respective companies, and are used only for identication or explanation and to the
owners’ benet, without intent to infringe.
E2940
First Edition V1
November 2006
iii
Contents
Notices......................................................................................................... vi
Safety information ..................................................................................... vii
M2NBP-VM CSM specications summary.............................................. viii
Chapter 1: Product introduction
1.1 Special features............................................................................ 1-2
1.1.1 Product highlights ........................................................... 1-2
1.1.2 Innovative ASUS features .............................................. 1-4
1.2 Before you proceed ..................................................................... 1-5
1.3 Motherboard overview................................................................. 1-6
1.3.1 Motherboard layout ......................................................... 1-6
1.3.2 Placement direction ........................................................ 1-7
1.3.3 Screw holes .................................................................... 1-7
1.4 Central Processing Unit (CPU) ................................................... 1-8
1.4.1 Installing the CPU ........................................................... 1-8
1.4.2 Installing the heatsink and fan ...................................... 1-10
1.5 System memory ......................................................................... 1-12
1.5.1 Overview ....................................................................... 1-12
1.5.2 Memory congurations.................................................. 1-12
1.5.3 Installing a DIMM .......................................................... 1-16
1.5.4 Removing a DIMM ........................................................ 1-16
1.6 Expansion slots.......................................................................... 1-17
1.6.1 Installing an expansion card ......................................... 1-17
1.6.2 Conguring an expansion card ..................................... 1-17
1.6.3 PCI slots........................................................................ 1-19
1.6.4 PCI Express x1 slot....................................................... 1-19
1.6.5 PCI Express x16 slot..................................................... 1-19
1.7 Jumpers ...................................................................................... 1-20
1.8 Connectors ................................................................................. 1-23
1.8.1 Rear panel connectors.................................................. 1-23
1.8.2 Internal connectors ....................................................... 1-25
iv
Contents
Chapter 2: BIOS setup
2.1 Managing and updating your BIOS ............................................ 2-2
2.1.1 ASUS Update utility ........................................................ 2-2
2.1.2 Creating a bootable oppy disk....................................... 2-4
2.1.3 ASUS EZ Flash utility...................................................... 2-5
2.1.4 Updating the BIOS .......................................................... 2-6
2.1.5 Saving the current BIOS le............................................ 2-8
2.1.6 ASUS CrashFree BIOS 2 utility ...................................... 2-9
2.2 BIOS setup program .................................................................. 2-10
2.2.1 BIOS menu screen.........................................................2-11
2.2.2 Menu bar........................................................................2-11
2.2.3 Legend bar.................................................................... 2-12
2.2.4 Menu items ................................................................... 2-12
2.2.5 Sub-menu items............................................................ 2-12
2.2.6 Conguration elds ....................................................... 2-12
2.2.7 Pop-up window ............................................................. 2-13
2.2.8 General help ................................................................. 2-13
2.3 Main menu .................................................................................. 2-14
2.3.1 System Time ................................................................. 2-14
2.3.2 System Date ................................................................. 2-14
2.3.3 Legacy Diskette A ......................................................... 2-14
2.3.4 Primary and Secondary IDE Master/Slave ................... 2-15
2.3.5 SATA 1/2/3/4 ................................................................. 2-17
2.3.6 HDD SMART Monitoring ............................................... 2-18
2.3.7 Installed Memory........................................................... 2-18
2.3.8 Usable Memory............................................................. 2-18
2.4 Advanced menu ......................................................................... 2-19
2.4.1 CPU Conguration ........................................................ 2-19
2.4.2 Chipset.......................................................................... 2-20
2.4.3 PCIPnP ......................................................................... 2-21
2.4.4 Onboard Devices Conguration.................................... 2-22
2.4.5 USB Conguration ........................................................ 2-25
v
Contents
2.5 Power menu................................................................................ 2-26
2.5.1 ACPI Suspend Type...................................................... 2-26
2.5.2 ACPI APIC Support....................................................... 2-26
2.5.3 APM Conguration........................................................ 2-26
2.5.4 Hardware Monitor ......................................................... 2-29
2.6 Boot menu .................................................................................. 2-30
2.6.1 Boot Device Priority ...................................................... 2-31
2.6.2 Removable Drives......................................................... 2-31
2.6.3 Boot Settings Conguration ......................................... 2-31
2.6.4 Security ......................................................................... 2-34
2.7 Exit menu.................................................................................... 2-35
vi
Notices
Federal Communications Commission Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions:
•
This device may not cause harmful interference, and
•
This device must accept any interference received including interference that
may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with manufacturer’
s instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following
measures:
•
Reorient or relocate the receiving antenna.
•
Increase the separation between the equipment and receiver.
•
Connect the equipment to an outlet on a circuit different from that to which the
receiver is connected.
•
Consult the dealer or an experienced radio/TV technician for help.
Canadian Department of Communications Statement
This digital apparatus does not exceed the Class B limits for radio noise emissions
from digital apparatus set out in the Radio Interference Regulations of the
Canadian Department of Communications.
This class B digital apparatus complies with Canadian ICES-003.
The use of shielded cables for connection of the monitor to the graphics card is
required to assure compliance with FCC regulations. Changes or modications
to this unit not expressly approved by the party responsible for compliance could
void the user’s authority to operate this equipment.
vii
Safety information
Electrical safety
• To prevent electrical shock hazard, disconnect the power cable from the
electrical outlet before relocating the system.
• When adding or removing devices to or from the system, ensure that the power
cables for the devices are unplugged before the signal cables are connected. If
possible, disconnect all power cables from the existing system before you add
a device.
• Before connecting or removing signal cables from the motherboard, ensure
that all power cables are unplugged.
• Seek professional assistance before using an adapter or extension cord. These
devices could interrupt the grounding circuit.
• Make sure that your power supply is set to the correct voltage in your area. If
you are not sure about the voltage of the electrical outlet you are using, contact
your local power company.
• If the power supply is broken, do not try to x it by yourself. Contact a qualied
service technician or your retailer.
Operation safety
• Before installing the motherboard and adding devices on it, carefully read all
the manuals that came with the package.
• Before using the product, make sure all cables are correctly connected and the
power cables are not damaged. If you detect any damage, contact your dealer
immediately.
• To avoid short circuits, keep paper clips, screws, and staples away from
connectors, slots, sockets and circuitry.
• Avoid dust, humidity, and temperature extremes. Do not place the product in
any area where it may become wet.
• Place the product on a stable surface.
• If you encounter technical problems with the product, contact a qualied
service technician or your retailer.
The symbol of the crossed out wheeled bin indicates that the product (electrical
and electronic equipment) should not be placed in municipal waste. Please
check local regulations for disposal of electronic products.
viii
M2NBP-VM CSM specications summary
(continued on the next page)
CPU
Chipset
Front Side Bus
Memory
Expansion slots
Graphics
Storage
High Denition Audio
LAN
USB
Support AMD socket AM2 for AMD Athlon™ 64FX/
Athlon™ 64 X2/Athlon™ 64/Sempron processors
AMD64 architecture enables simultaneous 32-bit and
64-bit computing
Supports AMD Cool ‘n’ Quiet™ Technology
AMD Live!™ Ready
Northbridge: NVIDIA®Quadro® NVS210S GPU
Southbridge: NVIDIA® nForce™430B MCP
2000/1600 MT/s
Dual-channel memory architecture
4 x 240-pin DIMM sockets support up to 8 GB of
unbufferred ECC 800/667/533 MHz DDR2 memory modules
1 x PCI Express™ x16 slot
1 x PCI Express™ x1 slot
2 x PCI slots
Integrated in the NVIDIA® GeForce™ 6 Graphics Processing
Unit (GPU)
Note:
DVI-D only supports digital display. You
cannot convert DVI-D to output RGB signal to
CRT display
.
NVIDIA® nForce™430B media and communications processor
(MCP) supports:
- 2 x Ultra DMA 133/100/66/33 interfaces for four
(4) hard disk drives
- 4 x Serial ATA 3 Gb/s hard disk drives supporting
RAID 0 and RAID 1 conguration.
SoundMAX® ADI AD1986A 5.1-channel CODEC
Supports Jack Sensing technology
S/PDIF out interface
NVIDIA® nForce™430B built-in Gigabit MAC with external
Marvell®PHY
Supports up to 8 USB 2.0 ports
ix
M2NBP-VM CSM specications summary
Manageability
Special features
BIOS features
Rear panel
Internal connectors
WfM2.0, DMI2.0, WOL by PME, WOR, PXE, Chassis Intrusion
ASUS CrashFree BIOS 2
ASUS EZ Flash
Note:
ASUS CrashFree BIOS 2 and ASUS EZ Flash only
support VGA/RGB output.
4 Mb Flash ROM, Award BIOS, PnP, DMI2.0, WfM2.0, ACPI
2.0, SM BIOS 2.3
1 x Parallel port
1 x LAN (RJ-45) port
4 x USB 2.0 ports
1 x VGA/RGB Out port
1 x VGA/DVI-D port
1 x PS/2 keyboard port
1 x PS/2 mouse port
5.1-channel audio ports
1 x Front panel audio connector
1 x CD audio in connector
1 x Chassis intrusion connector
1 x CPU fan connector
2 x Chassis fan connectors
1 x Power fan connector
1 x Floppy disk drive connector
1 x COM connectors
1 x Primary IDE connector
1 x Secondary IDE connector
1 x S/PDIF Out connector
4 x Serial ATA connectors
2 x USB 2.0 connectors for 4 additional USB 2.0 ports
1 x 24-pin ATX power connector
1 x 4-pin x ATX 12V power connector
1 x System panel connector
1 x TPM connector
ATX power supply (with 24-pin and 4-pin 12 V plugs)
ATX 12 V 2.0 compliant
uATX: 9.6 in. x 9.6 in. (24.5cm x 24.5cm)
*Specications are subject to change without notice.
x
Autres manuels pour M2NBP-VM CSM
1
Table des matières
Autres manuels Asus Carte mère
Asus
Asus P I-P55TP4N Manuel utilisateur
Asus
Asus P4C800-E Deluxe Manuel utilisateur
Asus
Asus ROG STRIX B550-F GAMING (WI-FI) Manuel utilisateur
Asus
Asus KFN4-DRE - Motherboard - SSI EEB 3.51 Manuel utilisateur
Asus
Asus PRIME Z370-P Manuel utilisateur
Asus
Asus PRIME B250M-PLUS/BR Manuel utilisateur
Asus
Asus TUV4X Manuel utilisateur
Asus
Asus Blitz Extreme Manuel utilisateur
Asus
Asus Z87-DELUXE DUAL Manuel utilisateur
Asus
Asus P5VD2 VM - SE Motherboard - Micro ATX Instructions de montage
Asus
Asus P5SD1-FM2 Manuel utilisateur
Asus
Asus A7V133 Manuel utilisateur
Asus
Asus A7V400-MX SE Manuel utilisateur
Asus
Asus PRIME B450M-K Manuel utilisateur
Asus
Asus P2Z Manuel utilisateur
Asus
Asus ROG STRIX Z370-H GAMING Manuel utilisateur
Asus
Asus M3A78 PRO Manuel utilisateur
Asus
Asus PRIME X370-PRO Manuel utilisateur
Asus
Asus M4N78 - PRO w/ Athlon II X2 240 Manuel utilisateur
Asus
Asus A55BM-E Manuel utilisateur
Manuels Carte mère populaires d'autres marques
Texas Instruments
Texas Instruments ADS8372EVM Manuel utilisateur
Commell
Commell MS-C73 Manuel utilisateur
IBT Technologies
IBT Technologies MB860 Manuel utilisateur
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur
Biostar
Biostar M7VIT Bravo Instructions d'utilisation et d'installation
Intel
Intel D33217CK Manuel utilisateur
