Asus A8NE-FM Manuel utilisateur

Motherboard

A8NE-FM

iiii

No part of this manual, including the products and software described in it, may be reproduced,

transmitted, transcribed, stored in a retrieval system, or translated into any language in any form

or by any means, except documentation kept by the purchaser for backup purposes, without the

express written permission of ASUSTeK COMPUTER INC. (“ASUS”).

Product warranty or service will not be extended if: (1) the product is repaired, modified or

altered, unless such repair, modification of alteration is authorized in writing by ASUS; or (2) the

serial number of the product is defaced or missing.

ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OR CONDITIONS OF

MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS

DIRECTORS, OFFICERS, EMPLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL,

INCIDENTAL, OR CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS

OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE LIKE), EVEN IF ASUS

HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES ARISING FROM ANY DEFECT OR

ERROR IN THIS MANUAL OR PRODUCT.

SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FURNISHED FOR

INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT ANY TIME WITHOUT NOTICE, AND

SHOULD NOT BE CONSTRUED AS A COMMITMENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY

OR LIABILITY FOR ANY ERRORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL,

INCLUDING THE PRODUCTS AND SOFTWARE DESCRIBED IN IT.

Products and corporate names appearing in this manual may or may not be registered

trademarks or copyrights of their respective companies, and are used only for identification or

explanation and to the owners’ benefit, without intent to infringe.

E1834E1834

E1834

First Edition V1First Edition V1

First Edition V1

November 2004November 2004

November 2004

iiiiii

iii

Contents

Notices ................................................................................................. v

Safety information .............................................................................. vi

A8NE-FM specifications summary ...................................................... vii

Chapter 1:Chapter 1:

Chapter 1: Hardware informationHardware information

Hardware informationHardware information

Hardware information

1.1 Before you proceed .............................................................. 1-2

1.2 Motherboard overview .......................................................... 1-3

1.2.1 Placement direction ................................................ 1-3

1.2.2 Screw holes ............................................................ 1-3

1.2.3 Motherboard layout ................................................ 1-4

1.2.4 Layout contents ..................................................... 1-5

1.3 Central Processing Unit (CPU) .............................................. 1-7

1.3.1 Installing the CPU.................................................... 1-7

1.3.2 Installing the heatsink and fan ................................ 1-9

1.4 System memory ................................................................. 1-12

1.4.1 Overview ............................................................... 1-12

1.4.2 Memory configurations ......................................... 1-12

1.4.3 Installing a DIMM ................................................... 1-13

1.4.4 Removing a DIMM ................................................. 1-13

1.5 Expansion slots ................................................................... 1-14

1.5.1 Installing an expansion card .................................. 1-14

1.5.2 Configuring an expansion card.............................. 1-14

1.5.4 PCI Express x16 slot ............................................. 1-16

1.5.3 PCI slots ................................................................ 1-16

1.6 Jumpers .............................................................................. 1-17

1.7 Connectors ......................................................................... 1-20

1.7.1 Rear panel connectors .......................................... 1-20

1.7.2 Internal connectors............................................... 1-22

iviv

Contents

Chapter 2:Chapter 2:

Chapter 2: BIOS setupBIOS setup

BIOS setupBIOS setup

BIOS setup

2.1 Managing and updating your BIOS ........................................ 2-2

2.1.1 Creating a bootable floppy disk .............................. 2-2

2.1.2 AwardBIOS Flash Utility .......................................... 2-3

2.1.3 ASUS CrashFree BIOS 2 utility ................................ 2-7

2.2 BIOS Setup program ............................................................. 2-8

2.2.1 BIOS menu bar ........................................................ 2-9

2.2.2 Legend bar ............................................................. 2-9

2.3 Main Menu........................................................................... 2-11

2.3.1 System Time ......................................................... 2-11

2.3.2 System Date ......................................................... 2-11

2.3.3 Legacy Diskette A ................................................ 2-11

2.3.4 Installed Memory .................................................. 2-11

2.3.5 Primary and Secondary IDE Master/Slave ............. 2-12

2.3.6 First, Second, Third, and Fourth SATA Master ..... 2-14

2.4 Advanced Menu .................................................................. 2-15

2.4.1 CPU configuration ................................................. 2-16

2.4.2 Chipset configuration ........................................... 2-17

2.4.3 PCIPnP ................................................................... 2-19

2.4.4 Onboard device configuration ............................. 2-20

2.5 Power Menu ........................................................................ 2-25

2.5.1 APM configuration ................................................ 2-26

2.5.2 Hardware monitor ................................................. 2-28

2.6 Boot Menu .......................................................................... 2-30

2.6.1 Boot Device Priority .............................................. 2-30

2.6.2 Removable drives ................................................. 2-31

2.6.3 Hard Disk Drives ................................................... 2-31

2.6.4 CD-ROM drives ...................................................... 2-32

2.6.5 Boot settings configuration .................................. 2-32

2.6.6 Security ................................................................ 2-34

2.7 Exit menu ........................................................................... 2-35

Notices

Federal Communications Commission StatementFederal Communications Commission Statement

Federal Communications Commission Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to

the following two conditions:

•

This device may not cause harmful interference, and

•

This device must accept any interference received including interference

that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a

Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are

designed to provide reasonable protection against harmful interference in a

residential installation. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

manufacturer’s instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by

turning the equipment off and on, the user is encouraged to try to correct

the interference by one or more of the following measures:

•

Reorient or relocate the receiving antenna.

•

Increase the separation between the equipment and receiver.

•

Connect the equipment to an outlet on a circuit different from that to

which the receiver is connected.

•

Consult the dealer or an experienced radio/TV technician for help.

Canadian Department of Communications StatementCanadian Department of Communications Statement

Canadian Department of Communications Statement

This digital apparatus does not exceed the Class B limits for radio noise

emissions from digital apparatus set out in the Radio Interference

Regulations of the Canadian Department of Communications.

This class B digital apparatus complies with CanadianThis class B digital apparatus complies with Canadian

This class B digital apparatus complies with Canadian

ICES-003.ICES-003.

ICES-003.

The use of shielded cables for connection of the monitor to the graphics

card is required to assure compliance with FCC regulations. Changes or

modifications to this unit not expressly approved by the party

responsible for compliance could void the user’s authority to operate

this equipment.

vivi

Safety information

Electrical safetyElectrical safety

Electrical safety

•

To prevent electrical shock hazard, disconnect the power cable from

the electrical outlet before relocating the system.

•

When adding or removing devices to or from the system, ensure that

the power cables for the devices are unplugged before the signal cables

are connected. If possible, disconnect all power cables from the existing

system before you add a device.

•

Before connecting or removing signal cables from the motherboard,

ensure that all power cables are unplugged.

•

Seek professional assistance before using an adapter or extension cord.

These devices could interrupt the grounding circuit.

•

Make sure that your power supply is set to the correct voltage in your

area. If you are not sure about the voltage of the electrical outlet you

are using, contact your local power company.

•

If the power supply is broken, do not try to fix it by yourself. Contact a

qualified service technician or your retailer.

Operation safetyOperation safety

Operation safety

•

Before installing the motherboard and adding devices on it, carefully read

all the manuals that came with the package.

•

Before using the product, make sure all cables are correctly connected

and the power cables are not damaged. If you detect any damage,

contact your dealer immediately.

•

To avoid short circuits, keep paper clips, screws, and staples away from

connectors, slots, sockets and circuitry.

•

Avoid dust, humidity, and temperature extremes. Do not place the

product in any area where it may become wet.

•

Place the product on a stable surface.

•

If you encounter technical problems with the product, contact a qualified

service technician or your retailer.

vii

A8NE-FM specifications summary

CPU

Chipset

Front Side Bus

Memory

Expansion slots

Storage

Audio

LAN

IEEE 1394

USB

BIOS features

Special features

Rear panel

(continued on the next page)

Socket 939 for AMD Athlon™ 64FX/AMD Athlon™ 64

processor

Supports AMD 64 architecture that enables simultaneous

32-bit and 64-bit architecture

NVIDIA

nForce4 (CK8-04 Standard - A02)

800MHz

Dual-channelmemoryarchitecture

2or optional 4 x184-pinDIMM sockets support non-ECC

unbufferred400/333MHzDDRmemory modules Supports

up to 4 GB system memory

1x PCI Expressx16 slot fordiscrete graphics card

3 x PCI slots

NVIDIA

nForce4

chipset supports:

- 4 x Ultra DMA 133/100/66/33 hard disk drives

- 4 x Serial ATA drives with RAID 0, RAID 1, RAID 1+0,

and JBOD configurations

Realtek

ALC655 6-channel CODEC

1 x Coaxial S/PDIF out port

Realtek

8201 CL 10/100 Mbps PHY LAN controller

T1 1394a controller supports:

- 2 x IEEE 1394a ports

Supports up to 8 USB 2.0 ports

4 Mb Flash ROM, Award BIOS, LPC

ASUS My Logo™

ASUSEZ Flash

ASUS Crash Free BIOS 2

ASUS CPU Overheating Protection (C.O.P.)

1 x PS/2 mouse port

1 x Parallel port

1 x IEEE 1394a port

1 x LAN (RJ-45) port

4 x USB 2.0 ports

1 x Coaxial S/PDIF Out port

1 x Serial (COM1) port

1 x PS/2 keyboard port

6-Channel audio ports

viiiviii

viii

1 x Floppy disk drive connector

2 x IDE connectors

4 x Serial ATA connectors

1 x CPU fan connector

1 x System fan connector

1 x Chip fan connector

2 x USB connectors

1 x IEEE 1394a connector

1 x 24-pin ATX power connector

1 x 4-pin ATX 12V power connector

1 x Internal audio connector

1x Front panel audio connector

1 x System panel connector

uATX form factor: 9.6 in x 9.6 in (24.4 cm x 24.4 cm)

A8NE-FM specifications summary

InternalInternal

Internal

connectorsconnectors

connectors

Form factorForm factor

Form factor

*Specifications are subject to change without notice.

Hardware

information

This chapter lists the hardware setup

procedures that you have to perform

when installing system components.

It includes description of the jumpers

and connectors on the motherboard.

1-21-2

1-2 Chapter 1: Hardware informationChapter 1: Hardware information

Chapter 1: Hardware informationChapter 1: Hardware information

Chapter 1: Hardware information

1.1 Before you proceed

Take note of the following precautions before you install motherboard

components or change any motherboard settings.

• Unplug the power cord from the wall socket before touching any

component.

• Use a grounded wrist strap or touch a safely grounded object or a

metal object, such as the power supply case, before handling

components to avoid damaging them due to static electricity

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded

antistatic pad or in the bag that came with the component.

•Before you install or remove any component, ensureBefore you install or remove any component, ensure

Before you install or remove any component, ensureBefore you install or remove any component, ensure

Before you install or remove any component, ensure

that the ATX power supply is switched off or thethat the ATX power supply is switched off or the

that the ATX power supply is switched off or the

power cord is detached from the power supply.power cord is detached from the power supply.

power cord is detached from the power supply. Failure

to do so may cause severe damage to the motherboard, peripherals,

and/or components.

Table des matières

Autres manuels Asus Carte mère

Asus

Asus MOTHERBOARD ULTRA P5V-VM Manuel utilisateur

Asus

Asus M4A785TD-V EVO - Motherboard - ATX Manuel utilisateur

Asus

Asus PRIME H610M-CS D4 Manuel utilisateur

Asus

Asus PRIME Z790-A WIFI Manuel utilisateur

Asus

Asus CROSSHAIR VI HERO Manuel utilisateur

Asus

Asus ROG STRIX Z490-E GAMING Manuel utilisateur

Asus

Asus P5LVM1394 Manuel utilisateur

Asus

Asus PRIME X370-A Manuel utilisateur

Asus

Asus P/I-P55T2P4S Manuel utilisateur

Asus

Asus Prime Z270-AR Series Manuel utilisateur

Asus

Asus Rampage III GENE Manuel utilisateur

Asus

Asus GRYPHON Z97 ARMOR EDITION Manuel utilisateur

Asus

Asus P5K-VM Manuel utilisateur

Asus

Asus ROG STRIX Z490-E GAMING Manuel utilisateur

Asus

Asus PRIME Z790M-PLUS Manuel utilisateur

Asus

Asus B150M Pro Gaming Manuel utilisateur

Asus

Asus P5Q PRO - Motherboard - ATX Manuel utilisateur

Asus

Asus STRIX Z270G GAMING Manuel utilisateur

Asus

Asus P8H67-M LE Manuel utilisateur

Asus

Asus PRIME B250M-J Manuel utilisateur

Asus

Asus P I-P65UP5 C-PKND Manuel utilisateur

Asus

Asus MEW-B Manuel utilisateur

Asus

Asus PRIME H310M-DASH Manuel utilisateur

Asus

Asus P8H61-M LX REV 3.0 Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuel utilisateur

Epson

Epson S5U13700P00C000 Manuel utilisateur

Gigabyte

Gigabyte GA-K8N Ultra-SLI Manuel utilisateur

Albatron

Albatron PX925XE Series Manuel utilisateur