Asus A7V-VM Manuel utilisateur

ASUSA7V-VM User’s Manual 1

1. FEATURES

Specifications

1.1 The ASUS A7V-VM Motherboard

The A7V-VM motherboard is carefully designed for the demanding PC user who

wants high-performance features in a small package.

1.1.1 Specifications

•AMD Athlon™ Processor Support: Supports AMD Athlon™ processor de-

signed for the AMD Athlon™ Processor Module (462-pin Socket A).

•North Bridge System Chipset: VIA VT8363™ system controller supports a

200MHz Front Side Bus (FSB), supports up to 1GB of PC133/PC100 SDRAM/

Virtual Channel Memory (VCM) SDRAM, complies with AGP 2.0 specifica-

tions for 4X, 2X, and 1XAGPmodes and PCI 2.2. bus interface with support for

5 PCI masters. It is optimized to deliver enhanced AMD Athlon™ processor

system performance.

•South Bridge System Chipset: VIA VT82C686A PCIset with PCI Super I/O

integrated peripheral controller supports UltraDMA/66, which allows burst mode

data transfer rates of up to 66.6MB/sec.

•PC133/PC100 Memory Support: Equipped with two DIMM sockets to sup-

port PC133/PC100-compliant SDRAMs (16, 32, 64, 128, 256, 512MB) up to

1GB.

• Super Multi-I/O: Provides two high-speed UART compatible serial ports and

one parallel port with EPP and ECP capabilities.

•Expansion Slots: Provides three 32-bit PCI 2.2 slots and one AGP expansion

slot. PCI supports up to 133MB/sec maximum throughput. Each PCI slot can sup-

port a Bus Master PCI card, such as a SCSI card.

•Wake-Up Support: Supports Wake-On-LAN activity with onboard network

support.

•AGP Slot: Supports an Accelerated Graphics Port card for high performance

component level interconnect targeted at 3D graphical display applications us-

ing 4X, 2X, or 1X mode bus.

•USB: Supports up to 4 USB ports, two on the back panel and two midboard for

more peripheral connectivity options.

•UltraDMA/66 & UltraDMA/33: Comes with an onboard PCI Bus Master IDE

controller with two connectors that support four IDE devices on two channels.

Supports UltraDMA/66, UltraDMA/33, PIO Modes 3 & 4 and Bus Master IDE

DMA Mode 2, and Enhanced IDE devices, such as DVD-ROM, CD-ROM, CD-

R/RW, LS-120, and Tape Backup drives.

•Onboard LAN Controller: Features the Realtek 10/100Mb Fast Ethernet Con-

troller, which supports Wired for Management, remote wake-up, and OnNow

initiative to reduce Total Cost of Ownership (TCO).

•OnboardAudio:HardwareAC’97 V2.1 CODEC compliant, Crystal’s 3D sound

circuitry, sample rate conversion from 7kHz to 48kHz.

E604

2ASUS A7V-VM User’s Manual

1. FEATURES

Specifications

1. FEATURES

•Infrared Interface: Integrated Serial Infrared interface supports an optional

remote control package for wireless interfacing with external peripherals, per-

sonal gadgets, or an optional remote controller.

1.1.2 Performance

• 100/133MHz or 100/100MHz Synchronous Host/DRAM Clock Support:

CPU frequency can operate at 100MHz while system memory operates at

133MHz or 100MHz.

• High-Speed Data Transfer Interface: This motherboard with its chipset and

support for UltraDMA/66 doubles the UltraDMA/33 burst transfer rate to

66.6MB/s. UltraDMA/66 is backward compatible with both DMA/33 and DMA

and with existing DMA devices and systems so there is no need to upgrade

current EIDE/IDE drives and host systems. (UltraDMA/66 requires a 40-pin

80-conductor cable to be enabled and/or for UltraDMA Mode 4.)

•Concurrent PCI: Concurrent PCI allows multiple PCI transfers from PCI mas-

ter buses to memory to CPU.

• SDRAM Optimized Performance: This motherboard supports Synchronous

Dynamic Random Access Memory (SDRAM), which increases the data transfer

rate (1.064GB/s max using PC133-compliant SDRAMs and 800MB/s max us-

ing PC100-compliant SDRAMs).

• ACPI Ready: ACPI (Advanced Configuration and Power Interface) provides

more Energy Saving Features for future operating systems (OS) supporting OS

Direct Power Management (OSPM) functionality. With these features imple-

mented in the OS, PCs can be ready around the clock, yet satisfy all the energy

saving standards. To fully utilize the benefits of ACPI, an ACPI-supported OS,

such as Windows 98, must be used.

• New Compliancy: Both the BIOS and hardware levels of the motherboard meets

PC 99 compliancy. The new PC 99 requirements for systems and components are

based on the following high-level goals: Support for Plug and Play compatibility

and power management for configuring and managing all system components,

and 32-bit device drivers and installation procedures for Windows 95/98/NT.

ASUSA7V-VM User’s Manual 3

1. FEATURES

Specifications

1.1.3 Intelligence

• Fan Status Monitoring and Alarm: To prevent system overheat and system

damage, the CPU, power supply, and system fans can be monitored for RPM

and failure. All the fans are set for its normal RPM range and alarm thresholds.

• Auto Fan Off: The system fans will power off automatically even in sleep

mode. This function reduces both energy consumption and system noise, and is

an important feature to implement silent PC systems.

• Remote Ring On (requires modem): This allows a computer with this

motherboard to be turned on remotely through an internal or external modem.

With this feature, users can access their computer from anywhere in the world!

4ASUS A7V-VM User’s Manual

2. HARDWARE SETUP

Motherboard Layout

2. H/W SETUP

2.1 A7V-VM Motherboard Layout

FLOPPY

PRIMARY IDE

SECONDARY IDE

HP-PANEL

A7V-VM

Audio

Codec

Buzzer

VIA

VT82C686A

Chipset

DIMM Socket 1 (64/72-bit, 168-pin module)

DIMM Socket 2 (64/72-bit, 168-pin module)

CPU_FAN

Accelerated Graphics Port (AGP)

VIA

VT8363

Chipset

Flash EEPROM

(Programable BIOS)

CR2032 3V

Lithium Cell

CMOS Power

PS/2

T: Mouse

B: Keyboard

COM2

HP-USB

USB

T: USB1

B: USB2

Top:

RJ-45

HEAD_PHONE

WOLCON

PS_FAN

PCI Slot 1

PCI Slot 3

PCI Slot 2

ATXPWR

Socket A

DOCT_FAN

MODEM

CD_IN

AUX

Realtek

Fast

Enternet

CLRTC

COM1

PARALLEL PORT

VGA

GAME_AUDIO

Mic

Line

Out

Line

ASUSA7V-VM User’s Manual 5

2. HARDWARE SETUP

Layout Contents

2. H/W SETUP

2.2 Layout Contents

Expansion Slots

1) DIMM1, DIMM2 p. 8 168-Pin DIMM Memory Support

2) Socket A p. 9 Central Processing Unit (CPU)

3) PCI1, PCI2, PCI3 p.10 32-bit PCI Bus Expansion Slots

4) AGP p.12 Accelerated Graphics Port

Connectors

1) PS2KBMS p.13 PS/2 Mouse Connector (6-pin female)

2) PS2KBMS p.13 PS/2 Keyboard Connector (6-pin female)

3) USBLAN p.14 Fast-Ethernet Port Connector

4) USBLAN p.14 Universal Serial Bus Ports 0 & 1 (Two 4-pin female)

5) PRINTER p.14 Parallel Port Connector (25-pin female)

6) COM1/COM2 p.15 Serial Port Connectors (9 pins, 10-1 pins)

7) GAME_AUDIO p.15 Game/MIDI Connector (15-pin female)

8) GAME_AUDIO p.16 Audio Port Connectors (Three 1/8” female)

9) PRIMARY/SECONDARYIDE p.16 Primary/Secondary IDE Connectors (Two 40-1pins)

10) PS_, CPU_, DOCT_FAN p.17 PowerSupply,CPU, Chassis FanConnectors(Three3-pin)

11) FLOPPY p.18 Floppy Disk Drive Connector (34-1pins)

12) HP_USB p.18 USB Header (12-2 pins)

13) CD_IN, AUX, MODEM p.19 InternalAudio Connectors (Three 4 pins)

14) WOL_CON p.19 Wake-On-LAN Connector (3 pins)

15) ATXPWR p.20 ATX Power Supply Connector (20 pins)

16) MLED (PANEL) p.20 System Message LED Lead (2 pins)

17) SMI (PANEL) p.20 System Management Interrupt Switch Lead (2 pins)

18) SPK (PANEL) p.20 System Warning Speaker Connector (4 pins)

19) RESET (PANEL) p.20 Reset Switch Lead (2 pins)

20) PLED (PANEL) p.20 System Power LED Lead (3 pins)

21) IDELED (PANEL) p.21 IDEActivity LED Lead (2 pins)

22) PWR (PANEL) p.21 ATX Power / Soft-Off Switch Lead (2 pins)

6ASUS A7V-VM User’s Manual

2. HARDWARE SETUP

2.3 Hardware Setup Procedure

Before using your computer, you must complete the following steps:

• Check Motherboard Settings

• Install Memory Modules

• Install the Central Processing Unit (CPU)

• Install Expansion Cards

• Connect Ribbon Cables, Panel Wires, and Power Supply

2.4 Motherboard Settings

This section explains in detail how to change your motherboard’s function settings

through the use of switches and/or jumpers.

WARNING! Computer motherboards and expansion cards contain very delicate Inte-

grated Circuit (IC) chips. To protect them against damage from static electricity, you

should follow some precautions whenever you work on your computer.

1. Unplug your computer when working on the inside.

2. Use a grounded wrist strap before handling computer components. If you do not have

one, touch both of your hands to a safely grounded object or to a metal object, such as

the power supply case.

3. Hold components by the edges and try not to touch the IC chips, leads or connectors, or

other components.

4. Place components on a grounded antistatic pad or on the bag that came with the compo-

nent whenever the components are separated from the system.

5. Ensure that the ATX power supply is switched off before you plug in or remove the

ATX power connector on the motherboard.

Motherboard Settings

2. H/W SETUP

ASUSA7V-VM User’s Manual 7

2. HARDWARE SETUP

2. H/W SETUP

Motherboard Settings

2.5 System Memory (DIMM)

NOTE: No hardware or BIOS setup is required after adding or removing memory.

This motherboard uses only Dual Inline Memory Modules (DIMMs). Sockets are

available for 3.3Volt (power level) unbuffered Synchronous Dynamic Random Ac-

cess Memory (SDRAM) of 16, 32, 64, 128MB, 256 or 512MB to form a memory size

between 16MB and 1GB. One side (with memory chips) of the DIMM takes up one

row on the motherboard.

To use the chipset’s Error Checking and Correction (ECC) feature, you must use a

DIMM with 9 chips per side (standard 8 chips/side + 1 ECC chip).

Install memory in any combination as follows:

IMPORTANT

•For optimum signal integrity, inserting the DIMMs in the following order is

recommended: DIMM1, DIMM2.

•SDRAMs used must be compatible with the current PC133/PC100 SDRAM

specification.

Location 168-pin DIMM Total Memory

DIMM1 (Rows 0&1) SDRAM 16, 32, 64, 128, 256, 512MB x1

DIMM2 (Rows 2&3) SDRAM 16, 32, 64, 128, 256, 512MB x1

Total System Memory (Max 1GB) =

2.5.1 General DIMM Notes

• This motherboard supports SPD (Serial Presence Detect) DIMMs. This is the

memory of choice for best performance vs. stability.

• This motherboard does NOT support registered memory.

• SDRAM chips are generally thinner with higher pin density than EDO (Ex-

tended Data Output) chips.

• Single-sided DIMMs come in 16, 32, 64,128, 256MB; double-sided come in 32,

64, 128, 256, 512MB.

8ASUS A7V-VM User’s Manual

2. HARDWARE SETUP

2.5.2 DIMM Memory Installation

Insert the module(s) as shown. Because the number of pins are different on either

side of the breaks, the module will only fit in the orientation shown. DIMM mod-

ules are longer and have different pin contact on each side and therefore have a

higher pin density. SIMM modules have the same pin contact on both sides.

A7V-VM 168-Pin DIMM Sockets

Lock

20 Pins

60 Pins

88 Pins

A7V-VM

TheDIMMs mustbe3.3VUnbufferedforthis motherboard.Todetermine theDIMM

type, check the notches on the DIMMs (see figure below).

168-Pin DIMM Notch Key Definitions (3.3V)

DRAM Key Position Voltage Key Position

Unbuffered

RFU

Buffered Reserved

3.3V

5.0V

The notches on the DIMM module will shift between left, center, or right to identify

the type and also to prevent the wrong type from being inserted into the DIMM slot

on the motherboard. You must ask your retailer the correct DIMM type before pur-

chasing. This motherboard supports four clock signals.

System Memory

2. H/W SETUP

ASUSA7V-VM User’s Manual 9

2. HARDWARE SETUP

2.6 Central Processing Unit (CPU)

The motherboard provides a ZIF Socket A. The CPU that came with the mother-

board should have a fan attached to it to prevent overheating. If this is not the case,

then purchase a fan before you turn on your system.

WARNING!Be sure that there is sufficient air circulation across the processor’s

heatsink by regularly checking that your CPU fan is working.Without sufficient

circulation, the processor could overheat and damage both the processor and the

motherboard. You may install an auxiliary fan, if necessary.

To install a CPU, first turn off your system and remove its cover. Locate the ZIF

socket and open it by first pulling the lever sideways away from the socket then

upwards to a 90-degree angle. Insert the CPU with the correct orientation as shown.

The notched corner should point towards the end of the lever. Because the CPU has

a corner pin for two of the four corners, the CPU will only fit in the orientation as

shown. The picture is for reference only; you should have a CPU fan that covers the

face of the CPU. With the added weight of the CPU fan, no force is required to

insert the CPU. Once completely inserted, close the socket’s lever while holding

down the CPU.After the CPU is , install an Intel recommended fan heatsink. Locate

the CPU fan connector (see 2.1 Motherboard Layout or 2.8 Connectors) and con-

nect the CPU fan cable to it.

CAUTION! Be careful not to scrape the motherboard when mounting a clamp-

style processor fan or else damage may occur to the motherboard.

A7V-VM Socket A

A7V-VM

AMD™ Athlon NOTCH

LOCK

LEVER

BLANK

CPU

2. H/W SETUP

10 ASUS A7V-VM User’s Manual

2. HARDWARE SETUP

2. H/W SETUP

Expansion Cards

2.7 Expansion Cards

WARNING!Unplug your power supply when adding or removing expansion

cards or other system components. Failure to do so may cause severe damage to

both your motherboard and expansion cards.

2.7.1 Expansion Card Installation Procedure

1. Read the documentation for your expansion card and make any necessary hard-

ware or software settings for your expansion card, such as jumpers.

2. Remove your computer system’s cover and the bracket plate on the slot you

intend to use. Keep the bracket for possible future use.

3. Carefully align the card’s connectors and press firmly.

4. Secure the card on the slot with the screw you removed above.

5. Replace the computer system’s cover.

6. Set up the BIOS if necessary

7. Install the necessary software drivers for your expansion card.

2.7.2 Assigning IRQs for Expansion Cards

Some expansion cards need an IRQ to operate. Generally, an IRQ must be exclu-

sively assigned to one use. In a standard design, there are 16 IRQs available but

most of them are already in use, leaving 6 IRQs free for expansion cards. If your

motherboard has PCI audio onboard, an additional IRQ will be used. If your moth-

erboard also has MIDI enabled, another IRQ will be used, leaving 4 IRQs free.

Autres manuels pour A7V-VM

Table des matières

Autres manuels Asus Carte mère

Asus

Asus P8H67-V R3 Manuel utilisateur

Asus

Asus PRIME Q270M-C/CSM Manuel utilisateur

Asus

Asus P5SD2-X SE Manuel utilisateur

Asus

Asus P5LD2-VM SE Manuel utilisateur

Asus

Asus A7VL-VM Manuel utilisateur

Asus

Asus P5KR Manuel utilisateur

Asus

Asus PRIME H310M2 R2.0 Manuel utilisateur

Asus

Asus Z87M-PLUS Manuel utilisateur

Asus

Asus MES-N Manuel utilisateur

Asus

Asus P3/370A Manuel utilisateur

Asus

Asus M4A89TD PRO/USB3 Manuel

Asus

Asus P5K SE EPU Manuel utilisateur

Asus

Asus STRIX Z270H Gaming Manuel utilisateur

Asus

Asus P9D-X Manuel utilisateur

Asus

Asus Maximus V Extreme Manuel utilisateur

Asus

Asus P5E-VM - Motherboard - Micro ATX Manuel utilisateur

Asus

Asus P5KPL-C 1600 Manuel utilisateur

Asus

Asus P8P67 PRO R3 Manuel utilisateur

Asus

Asus M4N98TD EVO Manuel utilisateur

Asus

Asus H97M-E Manuel utilisateur

Asus

Asus PRIME B350M-A Manuel utilisateur

Asus

Asus P5S-MX SE Manuel utilisateur

Asus

Asus PRIME H310I-PLUS R2.0/CSM Manuel utilisateur

Asus

Asus MAXIMUS III EXTREME Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur

Ski-Doo

Ski-Doo Bombardier MPEM 219 700 090 Manuel utilisateur

Epson

Epson S5U13700P00C000 Manuel utilisateur

Gigabyte

Gigabyte GA-K8N Ultra-SLI Manuel utilisateur

Albatron

Albatron PX925XE Series Manuel utilisateur