Assa Abloy 7003 Manuel utilisateur

Product Layout:

User Manual

7003 Smart Door Lock

Panel and lock body installation steps.

1. Adjust latch direction according to door opening side.

2. Lock body: Put lock body into hole made then tighten screw.

3. Put M 5 stud on front rose and use screwdriver tight it, data line and spindle go

thought lock body together properly and data line go thought back handle, then tight

M4*35 screws on back rose, last test lock body latch and bolt should work well.

4.Connect front data line onto port at back handle and put 4*AAA battery into handle,

after heard: “Du” means connected, last put battery cover on handle properly.

5. Put M 5 stud on front rose for cylinder then hole made for it and back rose should be

connect with right position then tight M4*35 screws. Cylinder go thought rose and

screw in cylinder screw on liner.

6.Install buckle plate and buckle box on frame, make sure bolt and latch work smoothly.

7. Try handle & lock body see if work smoothly otherwise check again until work well.

Change battery by using A screwdriver from back handle

Front rose back rose

Function button

Please keep internal/external panel clean before installation.

Lock body change direction

Handle change direction

latch

Latch adjust parts Commutate

lock body

liner

Pull spindle out and turn 180 degree

Inside Handle Outside Handle

Rose

1.When installing lock

sure batch bolt should

always on top and dead

bolt at.

2.Please adjust latch bolt

slope when necessary.

a.Latch bolt commutator

follow arrow direction that

push latch bolt in adjust it

as required.

b.Turn latch bolt 180° and

take it out from liner after

adjusting.

Product Features:

● Multiple way to access: Fingerprint & Mechanical Key.

● Fingerprint: Advanced semiconductor sensors with 360° scanner.

● Lock can have fingerprint access users capacity: Fingerprint ( 2 master users & 28 normal

users).

● Reminder: Unlock, low battery and up to lock voice.

● External power supply: Can use power bank with 5V for emergency power supply.

Operations:

1. Reset factory default: Press function button at back of lock for 5 seconds, voice will prompt

reset succeed.

2. Register master/user:

2.1 Initial mode: Short press function button at back handle 1 time voice promote add master.

2.2 Once master user is added: Short press function button at back handle 1 time, input any

registered master at this time can add 1 more master( if only 1 master registered) or common

user.

3. Delete registered fingerprint:

3.1 Short press function button at back handle 3 time, confirm any registered master and input

master or user need to be deleted, until heard succeed.

Other function:

1. Internal Forced Lock: Short press function button 2 times, voice promote locking,

at this time only master and key can unlock

2. On/Off unlocking mode:

2.1 After master open and pres function button at back 1 time within 6 second,unlocking

mode on.

2.2 By using mater open 1 time unlocking mode will off.

3. Turn off voice: Short press function button at back for 4 times, voice promote will be off.

4. Electricity quantity Checking and series checking: Short press function button at back for

5 times, voice will promote ( low / medium/high battery) and series no.

How to take battery cover out:

1. After installation of lock please reset lock to factory default mode.

2. After factory default mode make sure to register 1 master user.

3. The handle is the key part for opening and closing door, and its flexibility ratio directly

influences the usage of door lock, hence, don't hang articles on handle.

4. Gently press fingerprint on the fingerprint sensor for registration of fingerprint.

Please don't press with great force to prevent scratching the fingerprint sensor.

5. This lock uses 4 AAA high-energy alkaline batteries (1.5V). When it prompts "the

voltage is low, please replace battery" for the first time, the door can be opened for

about 100 times as per different battery capacities; At this time, the battery should be

replaced promptly to avoid inconvenience due to the exhausted battery.

Remark:

1. All fingerprint need to scan 3 times for addition.

2. After successful registration press function button at back to exit.

3. When Deleting fingerprint, one master user in fingerprint has to be left.

Remark:

4 5

When change battery use slotted screwdriver push in

and up towards door direction.

Autres manuels Assa Abloy Serrure de porte

Assa Abloy

Assa Abloy Corbin Russwin BLSS ML2000 Series Manuel utilisateur

Assa Abloy

Assa Abloy Sargent PR100 Manuel utilisateur

Assa Abloy

Assa Abloy Sargent PE8500 Series Manuel utilisateur

Assa Abloy

Assa Abloy 8654 Manuel utilisateur

Assa Abloy

Assa Abloy SARGENT 2828 Series Manuel utilisateur

Assa Abloy

Assa Abloy effeff MAGG1200SM Manuel utilisateur

Assa Abloy

Assa Abloy KESO KEK i-turn Manuel de l'opérateur

Assa Abloy

Assa Abloy besam US23-0696-01 Manuel de programmation

Assa Abloy

Assa Abloy Corbin Russwin ED8400 Series Manuel utilisateur

Assa Abloy

Assa Abloy Corbin Russwin Access 600 CL33600 TCRNE1... Manuel utilisateur

Assa Abloy

Assa Abloy Corbin Russwin Access 700 ML20700 TCPWI1... Manuel utilisateur

Assa Abloy

Assa Abloy CL33700 TCPWI1 Manuel utilisateur

Assa Abloy

Assa Abloy SARGENT 80 Series Manuel utilisateur

Assa Abloy

Assa Abloy Yale real Living Assure Lock SL Caractéristiques techniques

Assa Abloy

Assa Abloy MSL sFlipLock standard Manuel utilisateur

Assa Abloy

Assa Abloy ANYKEY Manuel utilisateur

Assa Abloy

Assa Abloy Sargent KP Series Manuel d'installation

Assa Abloy

Assa Abloy NORTON RIXSON CG0M19 Manuel utilisateur

Assa Abloy

Assa Abloy RIXSON W0700 Series Manuel utilisateur

Assa Abloy

Assa Abloy EMTEK LISCIO Guide de dépannage

Assa Abloy

Assa Abloy Effeff EX118P Series Manuel utilisateur

Assa Abloy

Assa Abloy Corbin Russwin Access 800 TCAC2 Series Manuel d'installation

Assa Abloy

Assa Abloy SARGENT 10X Series Manuel utilisateur

Assa Abloy

Assa Abloy SARGENT IN120 Wi-Fi Series Manuel utilisateur

Manuels Serrure de porte populaires d'autres marques

We.lock

We.lock SECBNEBL51 Manuel utilisateur

Iseo

Iseo MA1A Manuel utilisateur

ID Lock

ID Lock 150 Manuel utilisateur

Lockly

Lockly ACCESS TOUCH PRO Manuel utilisateur

iLoq

iLoq G50S Manuel utilisateur

SDC

SDC Z7835 Manuel utilisateur

ilco

ilco 452 Manuel utilisateur

Samsung

Samsung shs-h705 Manuel utilisateur

TRU-BOLT

TRU-BOLT 08102017 Manuel utilisateur

CDVI

CDVI 500-LADJ Manuel utilisateur

Igloohome

Igloohome Deadbolt 2S Metal Grey Instructions d'installation et d'entretien

eSSL

eSSL FL-300 Manuel utilisateur

JAKO

JAKO JKBTNX4 Manuel utilisateur

Dorma

Dorma MUNDUS PREMIUM GK 50 Guide de l'utilisateur

SCOOP

SCOOP Pullbloc 4.1 FS Panik Manuel utilisateur

Yale

Yale MORTISE 8800 SERIES Manuel utilisateur

Siegenia

Siegenia KFV AS3500 Manuel utilisateur

Saflok

Saflok Quantum ädesē RFID Manuel utilisateur