ARMTEL ACM-IP2 Manuel utilisateur

ACM-IP2 Analogue subsystems

module

RMLT.465275.006UM

User Manual

Document version 12

26.30.11.190

2020

ENG

armtel.com

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE

User Manual

armtel.com page 1/28

info@armtel.com © Armtel

ENG

INTRODUCTION

This User Manual is intended for introducing ACM-IP2 Analogue subsystems module

RMLT.465275.006 manufactured by Armtel LLC, Russia to the User.

ACM-IP2 Analogue subsystems module provides the functions of bi-directional

conversion of the digital IP-interface to analog for providing Public Address/ General Alarm

communication systems with subscriber intercoms equipped with an analog interface, and

also provides the ability to listen to recorded or broadcasted audio messages to subscriber

devices by the built-in amplifier.

Short name of product – ACM-IP2.

Maintenance personnel for ACM-IP2 shall be appointed by the management at

the installation site.

The maintenance personnel shall be required to know the operating procedure of

ACM-IP2 to the extent provided for by the User Manual.

Duties of the maintenance personnel shall include maintenance of ACM-IP2 in

accordance with this User Manual.

ATTENTION! In connection with systematic work to improve the design and

manufacturing technology, it is possible some discrepancy between the description and the

supplied product, which does not affect its operation or maintenance.

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE

User Manual

page 2/28 armtel.com

ENG

SAFETY PROVISIONS

During installation and operation of ACM-IP2, observe safety precautions laid out in

local regulations on electrical safety.

In order to ensure fire safety, follow the following rules:

−before connecting the product to the power supply, make sure the power and

communication cables are properly insulated;

−protect power and communication cables from damage.

To avoid electric shock, do not:

−operate the product with a damaged power or communication cable.

ATTENTION! NEVER DISMANTLE THE PRODUCT CONNECTED TO MAINS OR

EXTERNAL POWER SUPPLY.

Do not use the product in rooms with high humidity (more than 80 %) or conductive

dust.

The safety provisions for specific operations described in this manual are marked with:

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE

User Manual

armtel.com page 3/28

info@armtel.com © Armtel

ENG

CONTENTS

INTRODUCTION.................................................................................................................................................................... 1

SAFETY PROVISIONS........................................................................................................................................................... 2

CONTENTS .............................................................................................................................................................................. 3

1 DESCRIPTION AND OPERATION................................................................................................................................. 4

1.1 Features....................................................................................................................................................................... 4

1.2 Main specifications ................................................................................................................................................. 6

1.3 Scope of supply........................................................................................................................................................ 8

1.4 Design.......................................................................................................................................................................... 9

1.5 ADSL-IP2 Adapter .................................................................................................................................................11

1.6 Labeling.....................................................................................................................................................................13

1.7 Package.....................................................................................................................................................................13

2 INTENDED USE ................................................................................................................................................................14

2.1 Operating limits .....................................................................................................................................................14

2.2 Preparation for use ...............................................................................................................................................15

2.3 Installation, connection and dismantling .....................................................................................................15

2.4 Operation .................................................................................................................................................................17

3 MAINTENANCE................................................................................................................................................................19

3.1 General guidelines ................................................................................................................................................19

3.2 Safety precautions.................................................................................................................................................19

3.3 Maintenance procedure......................................................................................................................................19

3.4 Checking operability ............................................................................................................................................19

4 REPAIR ..............................................................................................................................................................................20

5 STORAGE............................................................................................................................................................................20

6 TRANSPORTATION.........................................................................................................................................................21

7 DISPOSAL...........................................................................................................................................................................21

APPENDIX A (reference) ACM-IP2 Connection diagrams ...................................................................................22

APPENDIX B (reference) ACM-IP2 External appearance......................................................................................26

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE

User Manual

page 4/28 armtel.com

ENG

1 DESCRIPTION AND OPERATION

1.1 Features

ACM-IP2 is designed for use in distributed and centralized digital Intercom and Public

Address / General Alarm communication systems (based on allotted SIP server) at industrial

and transportation facilities.

АСМ-IP2 enables to use analogue equipment and to interact with automation and

alarm units.

АСМ-IP2 is installed in communication cabinets, racks located in offices and control

rooms.

ACM-IP2 has two versions. Versions of АСМ-IP2 are shown in Table 1. External

appearance is given in Appendix B.

Table 1 - Versions of АСМ-IP2

Identification ADSL-IP2 Adapter

RMLT.465275.006

Not included

RMLT.465275.006-01

Included

ACM-IP2 can provide the following functions:

−simplex communication with analogue and digital terminal units via «Armtel-IP»

and SIP protocols;

−communication with analogue and digital terminal units using ADSL channel

and wireless data transfer Wi-Fi channel (for version RMLT.465275.006-01);

−construction of loud-speaking zonal alarm system (up to eight zones) with

the help of additional power amplifier and additional modules with relays

ARMT.665200.117 for switching of loudspeaker lines;

−recording of voice messages from terminal units to SD-card in WAV file format

with linear encoding of 16 bit 16 kHz, the size of the message depends on the

available space on the memory card of the unit. The total duration of messages

is more than 1500 minutes;

−playback of recorded voice messages on the terminal units;

−providing of calls priorities, set during configuration of the subscriber units, via

SIP and «Armtel-IP» protocols.

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE

User Manual

armtel.com page 5/28

info@armtel.com © Armtel

ENG

Configuration of АСМ-IP2 is performed from the administrator's PC, on which

the "IPN2 Configuration Software" RU.RMLT.00041-01 should be installed.

Figure 1 shows several alternatives of АСМ-IP2 usage.

Figure 1 – Example of АСМ-IP2 operation within distributed intercom and alarm systems

For example, organization of simplex communication sessions on routes:

- DIS-IP2 – Ethernet interface – Fast Ethernet Switch – Ethernet interface – АСМ-IP2 –

AW call station;

- AW call station – АСМ-IP2 – USB interface – ADSL-IP2 – WI-Fi access point – Ethernet

interface – Fast Ethernet Switch – Ethernet interface – DIS-IP2;

- AW call station – АСМ-IP2 – USB interface – ADSL-IP2 – ADSL interface – DSLAM –

Ethernet interface – Fast Ethernet Switch – Ethernet interface – DW-IP2.

Organization of loud-speaking Public address / General alarm sessions on routes:

- DIS-IP2 – Ethernet interface – Fast Ethernet Switch – Ethernet interface – АСМ-IP2 –

external amplifier – 4x Relay modules – loudspeakers (up to 8 pcs.);

- AW call station – АСМ-IP2 – Ethernet interface – Fast Ethernet Switch – Ethernet

interface – модуль АСМ-IP2 – built-in amplifier – loudspeaker (up to 1W).

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE

User Manual

page 6/28 armtel.com

ENG

1.2 Main specifications

Main specifications and operational characteristics of ACM-IP2 are given in

the Table 2.

Table 2 – Main specifications and operational characteristics

Parameter Value

Main specifications of ACM-IP2

Power supply by PoE plus line (IEEE 802.3at), V

-48

Rated voltage, V

-48

External power supply voltage range, V

from -36 to -60

Maximum current consumption at nominal power supply voltage:

- for version RMLT.465275.006, mA

- for version RMLT.465275.006-01, mA

510

610

Bandwidth (-3 dB level), Hz

from 300 to 6800

Communication interface

100BaseT Ethernet*

Communication protocol

«Armtel-IP», SIP

Overall dimensions, mm

174×125×55

Weight, kg

(0,3 ± 0,02)

Parameters of analogue lines

Number of analogue lines, pcs.

2**

Rated input signal, mV (dB)

775 (0)

Rated output signal, mV (dB)

Signal/noise ratio, min, dB

Internal resistance of the line, max, kOhm

1,0

* Two Ethernet ports, one being stand-by, also with power supply via PoE line.

** One line is in operation, the second line is reserved.

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE

User Manual

armtel.com page 7/28

info@armtel.com © Armtel

ENG

Table 2 – Main specifications and operational characteristics (end)

Parameter Value

Parameters of built-in amplifier

Number of channels of the built-in amplifier, pcs.

2***

Power of integrated amplifier per one channel

(at 8 Ohm load), min, W

1,0

Parameters of control lines

Number of control lines (programmable), pcs.

Input current, max, mA

5,0

Output current, at least, mA

Main specifications of ADSL-IP2 (for version RMLT.465275.006-01)

Power supply, V

3,3; 5,0

Communication interface

ADSL, ADSL2, ADSL2+

Communication protocol by ADSL line

IEEE802.3, IEEE802.3u,

ITU G.992.1…992.5

Communication interface

WI-FI 2.4

Communication protocol for Wi-Fi

IEEE 802.11a/b/g/n

Communication interface with ACM-IP2

USB 2.0

Overall dimensions with an antenna raised upright, mm

183×85×78

Weight, kg

(0,18 ± 0,01)

Operational characteristics

Electrical protection class (under GOST IEC 61140-2012)

III

Climatic category according GOST 15150-69

NF4.1

Relative air humidity at 25 °С, %

up to 80

Temperature range,

from - 5 to + 55

*** Transmission of audio information is carried out simultaneously through 2 channels.

1) Indoor use. АСМ-IP2 is installed in communication cabinets, racks located in offices and

control rooms

ACM-IP2 ANALOGUE SUBSYSTEMS MODULE

User Manual

page 8/28 armtel.com

ENG

1.3 Scope of supply

The scope of supply for ACM-IP2 is provided in Table 3.

Table 3 – Scope of supply

Identification Name

Quanti-

ty, pcs. Note

RMLT.465275.006* ACM-IP2 Analogue subsystems module 1

Product components

RMLT.468158.001

ADSL-IP2 Adapter

For version

RMLT.465275.006-01

Wi-Fi antenna NETIS PA105S 2,4 GHz

ARMT.665230.207.002

Flexible cable

Operational documentation

RMLT.465275.006PP

Product Passport

RMLT.465275.006UM

User Manual

* Version according to the contract for the supply. Parameter of versions see Table 1.

Autres manuels pour ACM-IP2

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels ARMTEL Unité de contrôle

ARMTEL

ARMTEL ACM-IP2.1 Manuel utilisateur

ARMTEL

ARMTEL ARMT.665200.104UM Manuel utilisateur

ARMTEL

ARMTEL ACM-IP2 Manuel utilisateur

ARMTEL

ARMTEL TOP-EC-IP2 Manuel utilisateur

Manuels Unité de contrôle populaires d'autres marques

Festo

Festo Compact Performance CP-FB6-E Manuel de la liste des pièces

Elo TouchSystems

Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur

JS Automation

JS Automation MPC3034A Manuel utilisateur

JAUDT

JAUDT SW GII 6406 Series Guide rapide

Spektrum

Spektrum Air Module System Manuel utilisateur

BOC Edwards

BOC Edwards Q Series Manuel utilisateur

KHADAS

KHADAS BT Magic Manuel utilisateur

Etherma

Etherma eNEXHO-IL Manuel utilisateur

PMFoundations

PMFoundations Attenuverter Manuel utilisateur

GEA

GEA VARIVENT Manuel utilisateur

Walther Systemtechnik

Walther Systemtechnik VMS-05 Manuel utilisateur

Altronix

Altronix LINQ8PD Instructions de montage

Eaton

Eaton Powerware Series Manuel utilisateur

WAGO

WAGO 750-407/040-000 Manuel utilisateur

Sony

Sony CCU-590 Manuel utilisateur

Graco

Graco 25D614 Manuel utilisateur

Task Force Tips

Task Force Tips YE-RF-900 Manuel de programmation

Shini

Shini SPV-U Series Manuel utilisateur