Aritech Advisor RD 6203 Manuel du propriétaire
142645999-4
ADVISOR®
RD 6203
Programming
Manual
Software from version: V6.0
COPYRIGHT
SLC Europe & Africa 1997. All rights reserved. No part of this publication may be reproduced, transmitted, stored in a retrieval system,
or transmitted in any form, or by any means - electronic, photocopying, recording, or otherwise - without the prior written permission of SLC
Europe & Africa.
DISCLAIMER
SLC Europe & Africa makes no representations or warranties with respect to the contents hereof and specifically disclaim any implied
warranties of merchantability or fitness for any particular purpose. Further SLC Europe & Africa reserve the right to revise this publication
and to make changes from time to time in the contents hereof without the obligation of SLC Europe & Africa to notify any person of any
such revision.
TABLE OF CONTENTS
HOW TO USE THE MANUAL .................................................................................................................................... 5
PROGRAMMING MAP RD62................................................................................................................................... 7
Selecting a menu option................................................................................................................................. 7
Programming map.......................................................................................................................................... 8
TESTING AND PROGRAMMING THE DIALLER.......................................................................................................... 13
MENU CONTENTS ............................................................................................................................................... 15
Telephone numbers and account numbers of central stations .................................................................... 16
Dialling options ............................................................................................................................................. 21
Set telephone number to where events are reported................................................................................... 22
Report delay ................................................................................................................................................. 26
Options for various protocols........................................................................................................................ 27
Test call menu.............................................................................................................................................. 30
Engineer code and lock menu...................................................................................................................... 31
Line monitor options ..................................................................................................................................... 32
Listen-in options ........................................................................................................................................... 33
APPENDIX 1- THE PROTOCOLS ........................................................................................................................... 35
APPENDIX 2- SIA EXTENSIONS & CONTACT ID .................................................................................................... 41
APPENDIX 3- TRANSPORT-PC ............................................................................................................................ 45
APPENDIX 4- DEFAULT PROGRAMMING CHART..................................................................................................... 49
INDEX ................................................................................................................................................................ 55
Page 4 Programming manual for RD6203
Programming manual for RD6203 Page 5
HOW TO USE THE MANUAL
This programming manual explains all the programming options available for the RD6203 modem/dialler.
Using the menu structured program, in conjunction with the programming map, any required option may be
easily and quickly selected.
All the menu items are explained in the chapter ‘Menu Contents,’ and they are also listed in the programming
map. Each menu item in the map has a quick code number associated with it. These numbers are repeated
in the section numbering of the ‘Menu Contents’ chapter to help you quickly locate information about the
menu item.
An example of the method used is shown below:
Programming map:
The quick code of menu item ‘1 event/call’ is 5.2.1.
Menu Content’s chapter:
5.2.1 Every event in a separate data block
Here you set whether 1 or several events per data block are sent to the central station. This
option must normally be set at ‘Yes’.
The organisation of this manual is based on standard programming.
At the back of the manual you will find a short explanation of the protocols, SIA extensions, contact ID codes,
transport PC, as well as an index.
1 event/call Yes
menu item’s quick code
menu description
keypad display
explanation
Page 6 Programming manual for RD6203
Keys used:
CD3008
Move down the menu (forward) â
Move up the menu (backward) á
Accept programming option ü
Reject programming option X
A few programming options require the use of the zero (0) key to toggle a digit ON or OFF a display. An
example of this use is shown on page 25 in “Report options programming.”
Version V6.0 diallers may be used with the CD range of control panels using
version V5.x or V6.0 software.
TO ENSURE CORRECT OPERATION
Regardless of the panel software version, always default the dialler before
programming.
Note: If the dialler is defaulted to version 6, version 5 panels will not be able
to default the dialler.
!
Programming manual for RD6203 Page 7
PROGRAMMING MAP FOR THE RD62
The following programming map provides an overview of all the menus available from the RD6203
modem/dialler.
Selecting a menu item
There are two methods for selecting the different menu items:
1. Use the keypad keys to scroll through the menu items (the step-by-step method). The programming map
shows the keypad keys you should press in order to arrive at the menu items. When you arrive at the
desired item, press the accept key ü. You will then move to the next set of items.
The symbols used to represent the keys are as follows:
üAccept X Reject ↓Move forward ↑Move backward
2. Use the menu item’s quick code. With this method you simply enter the number(s) shown in the menu
items’ boxes of the programming map and the display will immediately select the item for you. This
method is much quicker than scrolling through the items because you press fewer keys. Consequently, it
is also less prone to keystroke errors.
The quick code numbers do not appear on the keypad display. They are shown on the programming map
to help you locate an item.
For example:
To select the item “SIA Freq. BELL” the keystrokes required are as follows:
Using the step-by-step method: Using the quick code method:
ââââ to select PROTOCOL OPT 5 to select PROTOCOL OPT
üâ to select SIA 1 2 to select TIMECLOCK
üâââ to select SIA FREQ. BELL 4 to select SIA FREQ. BELL
Number of keystrokes:
10 3
Consequently by using the quick code method, programming is quicker and less prone to error.
The menu items are explained in the chapter “Menu Contents”. They are listed in the order of their quick
codes (as shown in the programming map).
Page 8 Programming manual for RD6203
PROGRAMMING MAP RD6203
Note: The quick code numbers in front of each menu item are also the section numbers in the Menu Contents chapter.
Programming manual for RD6203 Page 9
Page 10 Programming manual for RD6203
Table des matières
Autres manuels Aritech Modem
Manuels Modem populaires d'autres marques
Davicom
Davicom DM562AP Manuel utilisateur
EpiValley
EpiValley TATA indicom SXC-1080 Manuel utilisateur
Zte
Zte WiMAX Manuel utilisateur
Intelimax
Intelimax MA-2060 Manuel utilisateur
SMC Networks
SMC Networks D3CM1604V Manuel d'utilisation et d'entretien
Telstra
Telstra Wi-Fi 4G Advanced Pro X Manuel utilisateur
US Robotics
US Robotics 3453C Manuel utilisateur
MaxTech
MaxTech Plug & Play Internal Voice/FAX/Data/SVD... Manuel utilisateur
Zte
Zte MF823 Manuel utilisateur
Four-Faith
Four-Faith F1403 Manuel utilisateur
Sierra Wireless
Sierra Wireless AIRLINK MP595W Manuel utilisateur
Gemtek
Gemtek WiMAX WIXFBR-103 Manuel utilisateur