ARGON18 E-119 TRI+ Manuel utilisateur

travelguide

2E-119TRI+DISC: travel guide

Tableofcontents

TOOLS NEEDED & EMERGENCY REPAIR KIT 

DISASSEMBLY AND PACKING -

 Remove the wheels 

 Remove the seatpost collar and seatpost 

 Remove the bento box 

 Remove the stem cap 

 Remove the bottle cage mount 

 Loosen the bridge 

 Remove the bridge 

 Remove the handlebar 

 Pack your bike 

REASSEMBLY -

 Install the handlebars 

 Install the bridge 

 Tighten the bridge 

 Install the bottle cage mount 

 Install the stem cap 

 Install the bento box 

 Install the wheels 

 Insert the seatpost and seatpost collar 

CONTACT 

My E-119 Tri+ Disc

Size:

Serial number:

Seatpost height:

Bridge angle:

E-119TRI+DISC: travel guide

ToolsNeeded&emergencyrepairKit Removethewheels

1. Remove the front wheel using a 6mm allen key.

2. Repeat for rear wheel.

3. If the travel bag or case doesn’t secure both axles,

install an axle spacer to avoid frame compression.

4. Install brake pad spacer in both calipers to avoid

brake pad locking closed during travel.

5. Depending on your travel case, the rear derailleur

may also need to be removed.

Brake pad

spacer

Disassemblyandpacking

IMPORTANT:

EMERGENCY REPAIR KIT. Essential parts to always have on hand

IN CASE OF EMERGENCY…THIS MIGHT SAVE YOUR RIDE!

IMPORTANT:

Indicates special precautions and important steps that must

be taken to avoid damage and/or injury.

Apply carbon paste

on the indicated

surfaces.

Apply grease on the

indicated surfaces.

Apply threadlocker

on the indicated

surfaces.

6 Nm

2.5

1 Nm

5.5 Nm

7 Nm

HT-1/4

12 Nm

2 Nm

3 Nm

35 Nm

2.5

40 Nm 4 Nm

T25

3 Nm

2.5 5

9 Nm

2.5

HT-2

2.5

HT-5

2.5

2 Nm

32.5

HTHT

4 Nm

2 Nm

10 Nm

2.5

4Nm

6 Nm

5 Nm

Torque Value

Allen key size

81504 80802 80832

SEAT POST CLAMP

SET OF ALLEN KEYS

SET OF TORX KEYS

CARBON PASTE

& GREASE

TORQUE WRENCH

CLEAN RAG

ISOPROPYL ALCOHOL

MEDIUM-STRENGTH

THREADLOCKER

Tektro F10RS

Semi-Metallic

SPARE BRAKE PADSPARE REAR DERAILLEUR HANGER

2.5

2 3

2.5

T25

2.5 52.5

2.5

1.5

32.5 3

2.5

4Nm

1.5

4E-119TRI+DISC: travel guide

1. Mark or record the height of the seatpost.

2. Unscrew the M8 x 10mm set screw in place.

3. Remove the wedge by lifting with the Allen key before removing the seatpost.

4. Remove the seatpost.

5. Unplug the battery if using Di2.

6. Store the wedge and seatpost in your travel bag.

Removetheseatpostcollarandseatpost Removethebentobox

M4 x 16mm

Disassemblyandpacking

2.5

2 3

2.5

T25

2.5 52.5

2.5

1.5

32.5 3

2.5

4Nm

1.5

2.5

2 3

2.5

T25

2.5 52.5

2.5

1.5

2.5 3

2.5

4Nm

1.5

2.5

2 3

2.5

T25

2.5 52.5

2.5

1.5

32.5 3

2.5

4Nm

1.5

1. Remove the rear M4 x 16mm screw.

2. Loosen both M4 x 16mm front screws.

3. Lift the rear of the bento box and slide it toward the rear

of the bike to remove the unit.

4. Place the bento box and screws in the travel bag.

Démontageetempaquetage

E-119TRI+DISC: travel guide

REGULAR POSITION

FORWARD POSITION

WITHOUT WATER BOTTLE MOUNT

Removethestemcap

1. Remove both M3 x 6mm stem cap screws.

2. Lift the rear of the stem cap and pull backward until the front edges are clear

of the ﬁrst spacer.

3. Remove the cap and place the stem cap and screws in your travel bag.

Removethebottlecagemount

1. Unscrew the water bottle cage and the mount.

2. Remove the bridge plug if the mount is not being used.

M5 x 12mm

M5 x 14mm

M5 x 8mm

M5 x 14mm

M5 x 8mm

M5 x 12mm

M3 x 6mm

2.5

2 3

2.5

T25

2.5 52.5

2.5

1.5

32.5 3

2.5

4Nm

1.5

2.5

2 3

2.5

T25

2.5 52.5

2.5

1.5

32.5 3

2.5

4Nm

1.5

2.5

2 3

2.5

T25

2.5 52.5

2.5

1.5

32.5 3

2.5

4Nm

1.5

6E-119TRI+DISC: travel guide

M6 x 18mm

1. Record your bridge angle. __________________ . Angles are laser etched on

the swivel spacer and beam.

2. Loosen the two M6 x 18mm swivel screws (only one turn) just

to allow angle movement.

3. Unplug the shifter from the junction box or Blipbox, if you have

an electronic build.

Loosenthebridge Removethebridge

1. Tilt the bridge backward to access the front spacer M6 screw.

2. Remove the front spacer screw.

3. Tilt the bridge forward to access the rear spacer M6 screw.

4. Remove the rear spacer screw.

5. Pack the bridge, spacers and screws in the travel bag.

Disassemblyandpacking

2.5

2 3

2.5

T25

2.5

1.5

32.5 3

2.5

4Nm

1.5

2.5

2 3

2.5

T25

2.5

1.5

32.5 3

2.5

4Nm

1.5

2.5

2 3

2.5

T25

2.5

1.5

32.5 3

2.5

4Nm

1.5

Démontageetempaquetage

M6 x 16 mm

E-119TRI+DISC: travel guide

Removethehandlebar

1. Remove both M6 x 16mm screws from the ﬁrst spacer.

2. Remove the ﬁrst spacer.

3. Pack the ﬁrst spacer and screws in the travel bag.

Packyourbike

1. Place and secure the handlebar on the non-drive side of the frame.

2. Pack the bike, wheels and small parts in the travel bag according to

bag instructions.

3. Make sure everything is secured (chain, handlebar, bridge assembly, etc.)

to avoid paint damage.

IMPORTANT:

Use a spacer in axles to avoid compression damage

during travel.

2.5

2 3

2.5

T25

2.5 52.5

2.5

1.5

32.5 3

2.5

4Nm

1.5

8E-119TRI+DISC: travel guide

Installthebridge

1. Apply grease to the threads of the two spacer screws

(SKU: 81532 to 81541).

2. Tilt the bridge forward to install the rear spacer M6 screw.

3. Install and tighten the rear M6 spacer screw to 9 Nm.

4. Tilt the bridge backward to install the front spacer M6 screw.

5. Install and tighten the front M6 spacer screw to 9 Nm.

6. For electronic assembly, run the extension cable from the junction box

through the channel in the spacers and swivel.

7. Connect both extensions cables to the JC-41 junction box or Blipbox

if you have an electronic build.

Installthehandlebars

1. Unpack the bike from the travel bag.

2. Install the handlebar on the fork.

3. Install the ﬁrst spacer over the handlebar.

4. Apply grease to the threads of both M6 x 16mm

button head screws (SKU: 81545).

5. Tighten both M6 x 16mm button head screws to 6 Nm.

reassembly

M6 x 16mm

6 Nm

2.5

1 Nm

5.5 Nm

7 Nm

HT-1/4

12 Nm

2 Nm

3 Nm

35 Nm

2.5

40 Nm 4 Nm

T25

3 Nm

2.5 5

9 Nm

2.5

HT-2

2.5

HT-5

2.5

2 Nm

32.5

HTHT

4 Nm

2 Nm

10 Nm

2.5

4Nm

6 Nm

5 Nm

6 Nm

2.5

1 Nm

5.5 Nm

7 Nm

HT-1/4

12 Nm

2 Nm

3 Nm

35 Nm

2.5

40 Nm 4 Nm

T25

3 Nm

2.5

9 Nm

2.5

HT-2

2.5

HT-5

2.5

2 Nm

32.5

HTHT

4 Nm

2 Nm

10 Nm

2.5

4Nm

6 Nm

5 Nm

6 Nm

2.5

1 Nm

5.5 Nm

7 Nm

HT-1/4

12 Nm

2 Nm

3 Nm

35 Nm

2.5

40 Nm 4 Nm

T25

3 Nm

2.5

9 Nm

2.5

HT-2

2.5

HT-5

2.5

2 Nm

32.5

HTHT

4 Nm

2 Nm

10 Nm

2.5

4Nm

6 Nm

5 Nm

E-119TRI+DISC: travel guide

Installthebottlecagemount

M6 x 18mm

1. Adjust the bridge angle as noted while disassembling.

2. Tighten both M6 x 30mm screws to 9 Nm.

Tightenthebridge

1. Install the water bottle mount on the bridge, using the grey M5 x 12mm screw.

Tighten it to 2 Nm.

2. Screw the water bottle cage onto the mount at the desired position using the

red screws. Tighten both screws to 2 Nm.

3. Insert the bridge plug if the mount is not being used.

REGULAR POSITION

FORWARD POSITION

WITHOUT WATER BOTTLE MOUNT

M5 x 14mm

M5 x 8mm

M5 x 12mm

M5 x 14mm

M5 x 8mm

reassembly

6 Nm

2.5

1 Nm

5.5 Nm

7 Nm

HT-1/4

12 Nm

2 Nm

3 Nm

35 Nm

2.5

40 Nm 4 Nm

T25

3 Nm

2.5 5

9 Nm

2.5

HT-2

2.5

HT-5

2.5

2 Nm

32.5

HTHT

4 Nm

2 Nm

10 Nm

2.5

4Nm

6 Nm

5 Nm

6 Nm

2.5

1 Nm

5.5 Nm

7 Nm

HT-1/4

12 Nm

2 Nm

3 Nm

35 Nm

2.5

40 Nm 4 Nm

T25

3 Nm

2.5

9 Nm

2.5

HT-2

2.5

HT-5

2.5

2 Nm

32.5

HTHT

4 Nm

2 Nm

10 Nm

2.5

4Nm

6 Nm

5 Nm

6 Nm

2.5

1 Nm

5.5 Nm

7 Nm

HT-1/4

12 Nm

2 Nm

3 Nm

35 Nm

2.5

40 Nm 4 Nm

T25

3 Nm

2.5 5

9 Nm

2.5

HT-2

2.5

HT-5

2.5

2 Nm

32.5

HTHT

4 Nm

2 Nm

10 Nm

2.5

4Nm

6 Nm

5 Nm

10 E-119TRI+DISC: travel guide

1. Slide the bento box onto the frame hole on the top tube.

Make sure the frame is between the bento box and the clamp.

2. Apply threadlocker to the threads of the screws.

3. Hand-tighten the three M4 x 16mm screws.

1. Insert the front edges into the ﬁrst spacer grooves.

2. Push the stem cap down until the holes are aligned with the threads

on the fork.

3. Install and hand-tighten both M3 x 6mm screws.

4. If using eTap: Push the blipbox into the stem cap until it clicks.

M3 x 6mm

eTap Only

M4 x 16mm

InstallthebentoboxInstallthestemcap

reassembly

6 Nm

2.5

1 Nm

5.5 Nm

7 Nm

HT-1/4

12 Nm

2 Nm

3 Nm

35 Nm

2.5

40 Nm 4 Nm

T25

3 Nm

2.5 5

9 Nm

2.5

HT-2

2.5

HT-5

2.5

2 Nm

2.5

4 Nm

2 Nm

10 Nm

2.5

4Nm

6 Nm

5 Nm

2.5

2 3

2.5

T25

2.5 52.5

2.5

1.5

32.5 3

2.5

4Nm

1.5

Autres manuels pour E-119 TRI+

Table des matières

Autres manuels ARGON18 Vélo

ARGON18

ARGON18 GALLIUM PRO 259A Manuel utilisateur

ARGON18

ARGON18 E-118 NEXT Manuel utilisateur

ARGON18

ARGON18 GALLIUM DISC 280A Manuel utilisateur

ARGON18

ARGON18 ELECTRON PRO Manuel utilisateur

ARGON18

ARGON18 KRYPTON PRO 302A Manuel utilisateur

ARGON18

ARGON18 KRYPTON 212A Manuel utilisateur

ARGON18

ARGON18 Grey Matter Manuel utilisateur

ARGON18

ARGON18 RADON 237A Manuel utilisateur

ARGON18

ARGON18 GALLIUM CS DISC 362A Manuel utilisateur

ARGON18

ARGON18 E-119 TRI+ Manuel utilisateur

ARGON18

ARGON18 SUBITO Manuel utilisateur

ARGON18

ARGON18 KRYPTON XROAD 213C Manuel utilisateur

ARGON18

ARGON18 E-118 NEXT Manuel utilisateur

ARGON18

ARGON18 GALLIUM DISC 339A Manuel utilisateur

ARGON18

ARGON18 E-119 TRI+ Manuel utilisateur

ARGON18

ARGON18 E-118 NEXT Manuel utilisateur

ARGON18

ARGON18 E-118 NEXT Manuel utilisateur

ARGON18

ARGON18 E-117 TRI 285A Manuel utilisateur

ARGON18

ARGON18 GALLIUM PRO Manuel utilisateur

ARGON18

ARGON18 GALLIUM PRO DISC 338A Manuel utilisateur

ARGON18

ARGON18 GALLIUM DISC 339A 2021 Manuel utilisateur

ARGON18

ARGON18 E-118 TRI+ Disc 315A Manuel utilisateur

ARGON18

ARGON18 GALLIUM CS DISC 322A Manuel utilisateur

ARGON18

ARGON18 KRYPTON Manuel utilisateur

Manuels Vélo populaires d'autres marques

RAMBO

RAMBO R1000X2M-FF-BFD Manuel utilisateur

Vermeiren

Vermeiren SAFARI Manuel utilisateur

Velec

Velec A2/36V Manuel utilisateur

Coswheel

Coswheel A-ONE Manuel utilisateur

Betzold

Betzold 97869 Manuel utilisateur

Cervélo

Cervélo S3 2019 Manuel utilisateur

Tenways

Tenways AGO X Manuel utilisateur

Festo

Festo EGSC-BS-KF Manuel de la liste des pièces

Gio Electric

Gio Electric H1 Volt Manuel utilisateur

GOGOBEST

GOGOBEST GM30 Manuel utilisateur

DAHON

DAHON CIAO - 2009 Manuel utilisateur

Aprimatic

Aprimatic ONDA 500 Guide de démarrage rapide

MV Agusta

MV Agusta Lucky Explorer GRAVEL Manuel d'instructions

Greyp

Greyp G6 Series Manuel utilisateur

Babboe

Babboe Carve-E Manuel utilisateur

Huka

Huka orthros Manuel utilisateur

Xtracycle

Xtracycle Stoker 2021 Manuel utilisateur

APRILIA

APRILIA DORSODURO 750 ABS 2015 Manuel utilisateur