Arecont Vision MegaBall AV2245PM-W Manuel utilisateur

Installation Manual

MegaBall®2 PM Models

(Remote Zoom, Remote Focus, P-iris)

AV2245PM-W

AV2246PM-W

AV3245PM-W

AV3246PM-W

AV5245PM-W

AV2245PM-D

AV2245PM-D-LG

AV2246PM-D

AV2246PM-D-LG

AV3245PM-D

AV3245PM-D-LG

AV3246PM-D

AV3246PM-D-LG

AV5245PM-D

AV5245PM-D-LG

-W Models

-D Models

-D Models (In-ceiling)

Arecont Vision MegaBall®2 Installation Manual

Page | 2 support@arecontvision.com

MegaBall®2 Panomorph Models

AV5245DN-01-W

AV5245DN-01-WA

AV5245DN-01-D

AV5245DN-01-DA

AV5245DN-01-D-LG

AV5245DN-01-DA-LG

-W Models

-D Models

-D Models (In-ceiling)

Arecont Vision MegaBall®2 Installation Manual

Page | 3 support@arecontvision.com

MegaBall™2 Installation

Contents

Package Contents................................................................................................................................................... 4

Notes:........................................................................................................................................................................ 5

Warranty Information.............................................................................................................................................. 5

Install MegaBall™ 2 Wall Mount Camera (-W Models)..................................................................................... 6

Install MegaBall™ 2 Dome Version (-D Models)................................................................................................ 7

Software Installation.............................................................................................................................................. 15

Wall Mount (D4S-WMT-B or D4S-WMT) Installation Instructions (Sold Separately)................................. 16

Junction Box Adapter (SV-JBA) Installation Instruction (Sold Separately).................................................. 17

Electrical Box Adapter (SV-EBA) Installation Instructions (Sold Separately).............................................. 18

LED Indicators....................................................................................................................................................... 19

Support ................................................................................................................................................................... 20

Mounting Template............................................................................................................................................... 21

Arecont Vision MegaBall®2 Installation Manual

Page | 4 support@arecontvision.com

Package Contents

MegaBall™ 2 Wall Mount Version (-W)

A. Arecont Vision MegaBall™ 2 camera with

wall mount (indoor use only)

B. Mounting template

C. CD with AV100 software and user manuals

(license key required for recording)

D. Pack of three (3) screws and three (3)

anchors

NOTE: Anchors and screws are good to be

used for concrete, wall block and red bricks.

NOTE: Screws by themselves can be used in

wood.

Image 1-1

MegaBall™2 Dome Version (-D)

A. Arecont Vision MegaBall™ 2 camera with

in-ceiling mount (indoor use only)

B. Surface mount (preassembled on dome)

C. O-ring (preassembled on bezel)

D. Dome cover (Bubble)

E. CD with AV100 software and user manuals

(license key required for recording)

F. Security L-Key

G. Pack of three (3) screws and three (3)

anchors

NOTE: Anchors and screws are good to be

used for concrete, wall block and red bricks.

NOTE: Screws by themselves can be used in

wood.

H. Mounting template

Image 1-2

Notes:

1. Camera Operating Temperature -5°C (23°F) to +50°C (122°F)

2. Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and

with all local codes and authorities having jurisdiction. Wiring should be UL Listed and/or

Recognized wire suitable for the application.

3. Always use hardware e.g. screws, anchors, bolts, locking nuts etc. which are compatible with

mounting surface and of sufficient length and construction to insure a secure mount.

Warranty Information

3 Year Limited Warranty

ARECONT VISION warrants to Purchaser (and only Purchaser) (the “Limited Warranty”), that: (a) each Product shall be free

from material defects in material and workmanship for a period of thirty-six (36) months from the date of shipment (the

“Warranty Period”); (b) during the Warranty Period, the Products will materially conform with the specification in the applicable

documentation; (c) all licensed programs accompanying the Product (the “Licensed Programs”) will materially conform with

applicable specifications. Notwithstanding the preceding provisions, ARECONT VISION shall have no obligation or

responsibility with respect to any Product that (i) has been modified or altered without ARECONT VISION’s written

authorization; (ii) has not been used in accordance with applicable documentation; (iii) has been subjected to unusual stress,

neglect, misuse, abuse, improper storage, testing or connection; or unauthorized repair; or (iv) is no longer covered under the

Warranty Period. ARECONT VISION MAKE NO WARRANTIES OR CONDITIONS, EXPRESS, IMPLIED, STATUTORY OR

OTHERWISE, OTHER THAN THE EXPRESS LIMITED WARRANTIES MADE BY ARECONT VISION ABOVE, AND

ARECONT VISION HEREBY SPECIFICALLY DISCLAIMS ALL OTHER EXPRESS, STATUTORY AND IMPLIED

WARRANTIES AND CONDITIONS, INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A

PARTICULAR PURPOSE, NON-INFRINGEMENT AND THE IMPLIED CONDITION OF SATISFACTORY QUALITY. ALL

LICENSED PROGRAMS ARE LICENSED ON AN “AS IS” BASIS WITHOUT WARRANTY. ARECONT VISION DOES NOT

WARRANT THAT (I) THE OPERATION OF THE PRODUCTS OR PARTS WILL BE UNINTERRUPTED OR ERROR FREE;

(II) THE PRODUCTS OR PARTS AND DOCUMENTATION WILL MEET THE END USERS’ REQUIREMENTS; (III) THE

PRODUCTS OR PARTS WILL OPERATE IN COMBINATIONS AND CONFIGURATIONS SELECTED BY THE END USER;

OTHER THAN COMBINATIONS AND CONFIGURATIONS WITH PARTS OR OTHER PRODUCTS AUTHORIZED BY

ARECONT VISION OR (IV) THAT ALL LICENSED PROGRAM ERRORS WILL BE CORRECTED.

For RMA and Advance Replacement information visit ArecontVision.com

Arecont Vision MegaBall®2 Installation Manual

Page | 6 support@arecontvision.com

Install MegaBall™ 2 Wall Mount Camera (-W Models)

Mounting the Camera:

1. Remove the camera and hardware from the

box.

2. Using the mounting template, prepare the

mounting surface for camera installation.

3. Plug the Ethernet cable into the MegaBall™ 2

PoE female RJ45 connector. (Image 2)

NOTE: If the camera will be powered via PoE,

please skip to step 5.

Image 2

4. If the camera will be powered by an AC 24V

or DC 12-48V power supply, connect

external power with pigtail cable connector.

NOTE 1: Ensure that the polarity of the DC

input on the camera matches the way that

the wires are installed in the connector

shown in Image 2.

NOTE 2: AC power does not have polarity.

5. Align the holes on the camera wall mount

with the prepared holes on the mounting

surface. Attach the camera to the mounting

surface with the wood screws or any other

hardware suitable for the mounting surface.

Adjusting the Tilt, Pan, Z-Axis (yaw):

6. To adjust the camera tilt, pan or z-axis (yaw),

loosen the ring on the wall mount bracket as

shown in Image 3 then adjust as necessary and

retighten the ring.

Image 3

NOTE: The 3-axis bracket allows 360°

camera body rotation, 90° tilt and 360°

bracket rotation for easy installation in any

location. (Image 4)

Image 4

CAUTION: Adjusting the camera without

loosening the bracket ring may result in

scratches on the bracket joint. Incorrect

installation practices are not covered under

warranty!

Digital In

Alarm Out

Auxiliary Power

PoE RJ45

90°

360°

Bracket Ring

Install MegaBall™ 2 Dome Version (-D Models)

Mounting the Camera:

1. Remove the camera and hardware from the

box.

2. Using the mounting template, prepare the

mounting surface for camera installation.

3. Plug Ethernet cable into the MegaBall™ 2

PoE female RJ45 connector. (Image 5)

NOTE: If the camera will be powered via

PoE, please skip to step 5.

Image 5

4. If the camera will be powered by an AC 24V

or DC 12-48V power supply, connect

auxiliary power to terminal block on pigtail

cable connector.

NOTE 1: Ensure that the polarity of the DC

input on the camera matches the way that

the wires are installed in the connector

shown in Image 5.

NOTE 2: AC power does not have polarity.

5. Using the provided Security L-key (Image

1F), loosen the three (3) screws securing

the dome cover (Image 6). Remove the

vandal resistant dome cover.

NOTE: Do not remove the screws from the

dome cover.

Image 6

6. Loosen the three (3) machine screws

(Image 7) and remove the in-ceiling mount

camera from the surface mount housing.

Image 7

Digital In

Alarm Out

Auxiliary Power

PoE RJ45

Screws

Arecont Vision MegaBall®2 Installation Manual

Page | 8 support@arecontvision.com

In-ceiling Mount Installation (Optional)

7. Using the mounting template, cut a hole in

the surface for mounting.

8. Insert the in-ceiling mount camera into the

hole.

9. Tighten the “lever screws”until the flush

mount is snug, as shown in Image 8. The

“Support Arm” will ride down the screw to

compress the mounting surface.

NOTE: Do not over-torque the lever screws.

Image 8

Surface mount installation

10. Align the holes in the surface mount with the

prepared holes on the mounting surface

with the wood screws or any optional

hardware suitable for the mounting surface.

11. Attach the in-ceiling camera to the surface

mount, using the three machine screws as

shown on Image 7.

Adjusting the Tilt, Pan, Z-Axis (Yaw):

12. To adjust the camera tilt, pan or z-axis

(yaw), loosen the 3 set screws on the in-

ceiling mount as shown in Image 9. Then

adjust as necessary and retighten the 3 set

screws.

Image 9

NOTE : The 3-axis in-ceiling camera allows

360° camera body rotation, 90° tilt, and

360° camera sleeve rotation for easy

installation in any location as shown in

Image 10.

Image 10

Lever

Screw

Tilt 90°

Support

Arm

Set Screw

Camera Body

Rotate 360°

Camera Sleeve

Rotate 360°

Arecont Vision MegaBall®2 Installation Manual

Page | 9 support@arecontvision.com

Adjusting focus on Panomorph lens (DN-01

models only)

13. Loosen two set screws on focus ring by

provided security L-key (Image 1-2F on

Page 4) as shown in image 11

Image 11

14. Loosen two set screws on the front shell of

Megaball 2 camera by provided security L-

key (Image 1-2F on Page 4) as shown in

image 12

Image 12

15. To focus AV5245DN-01 camera, rotate

focus ring as needed to get best focus

position as shown in Image 13.

Image 13

NOTE: Ellipse maybe not symmetrical at best

focus position as shown in Image 14

Image 14

16. Rotate lens as needed to get ellipse

symmetrical as shown in Image 15.

Focus

Ring

Unsymmetrical Ellipse Image

Focus

Ring

Front

Shell

Arecont Vision MegaBall®2 Installation Manual

Page | 10 support@arecontvision.com

Image 15

NOTE: To get properly dewarping image from

ImmerVision Enables®software, Ellipse needs

to be symmetrical as shown in Image 16.

Image 16

17. Tighten two set screws on focus ring by

provided security L-key (Image 1-2F on

Page 4) as shown in image 11

18. Tighten two set screws on the front shell of

Megaball 2 camera by provided security L-

key (Image 1-2F on Page 4) as shown in

image 12

Dewarping from Immervsion Demo viewer

(DN-01 models)

19. Run the Immervision demo viewer. (Image

17, found on the CD).

Image 17

20. Choose Arecont from camera list as shown

in image 18.

Image 18

21. Choose A8TRT lens option as shown in

image 19.

Image 19

Lens

Symmetrical Ellipse Image

Autres manuels pour MegaBall AV2245PM-W

Ce manuel convient aux modèles suivants

Table des matières

Autres manuels Arecont Vision Caméra de sécurité

Arecont Vision

Arecont Vision MegaDome 2 Manuel utilisateur

Arecont Vision

Arecont Vision megadome Manuel utilisateur

Arecont Vision

Arecont Vision MegaDome 2 Manuel utilisateur

Arecont Vision

Arecont Vision MegaBall 2 Manuel utilisateur

Arecont Vision

Arecont Vision AV1215PM-S Manuel utilisateur

Arecont Vision

Arecont Vision D4S Series Manuel utilisateur

Arecont Vision

Arecont Vision AV08ZMV-300 Manuel utilisateur

Arecont Vision

Arecont Vision Megaball series Manuel utilisateur

Arecont Vision

Arecont Vision SurroundVideo Omni AV12176DN-08 Manuel utilisateur

Arecont Vision

Arecont Vision Contera AV02CLB-100 Manuel utilisateur

Arecont Vision

Arecont Vision AV1255AM Manuel utilisateur

Arecont Vision

Arecont Vision MegaDomeT Manuel utilisateur

Arecont Vision

Arecont Vision SurroundVideo G5 Mini Manuel utilisateur

Arecont Vision

Arecont Vision MegaDome AV1355DN-1HK Manuel utilisateur

Arecont Vision

Arecont Vision D4SO Series Manuel utilisateur

Arecont Vision

Arecont Vision AV12ZMV-301 Manuel utilisateur

Arecont Vision

Arecont Vision MegaDome G3 Manuel utilisateur

Arecont Vision

Arecont Vision D4SO Series Manuel utilisateur

Arecont Vision

Arecont Vision AV12975DN-NL Manuel utilisateur

Arecont Vision

Arecont Vision MegaView 2 AV1225PMIR-S Manuel utilisateur

Arecont Vision

Arecont Vision H.264 Day/Night SurroundVideo Series Manuel utilisateur

Arecont Vision

Arecont Vision MicroDome G2 AV1555DN-S Manuel utilisateur

Arecont Vision

Arecont Vision ConteraIP Fisheye AV12CPD-236 Manuel utilisateur

Arecont Vision

Arecont Vision AV12275DN-NL Manuel utilisateur

Manuels Caméra de sécurité populaires d'autres marques

Okina USA

Okina USA SIR36-870VF650LP Manuel utilisateur

Divio

Divio NDR155PA Manuel utilisateur

Canon

Canon VB-C500D Manuel utilisateur

Easy Access

Easy Access EasyGuard Manuel utilisateur

Vivotek

Vivotek FD9389-EHV-v2 Manuel utilisateur

TUYA

TUYA COSMO W2 Manuel utilisateur

Eusso

Eusso UNC7500-IR Guide de configuration

urmet domus

urmet domus 1096/204 Manuel utilisateur

VC VC20 series Manuel utilisateur

Axis

Axis Q1614 Manuel utilisateur

ieGeek

ieGeek DD201 Manuel utilisateur

VADDIO

VADDIO ClearVIEW HD-USB PTZ 999-6990-000 Manuel utilisateur

Vicon

Vicon V662-D-1 Mode d'emploi

Grundig

Grundig GCH-K0274P Manuel utilisateur

Lorex

Lorex VANTAGE LBC7032 Manuel utilisateur

4xem

4xem WPT Manuel utilisateur

Samsung

Samsung SCV-3082 Manuel utilisateur

Vitek

Vitek VTC-C544 Manuel utilisateur