Apera Instruments LabSen 751 Manuel utilisateur

LabSen 751 Stainless Steel Sheath Spear pH Electrode

User Manual

LabSen electrochemical sensors are premium pH electrode with manufacturing technology and key

components imported from Switzerland. LabSen751 spear pH electrode adopts spear membrane,

which can easily pierce into solid or semi-solid medium. This probe is suitable for pH measuring of

cheese, flour products, meat and fruits.

This probe has following features:

⚫ Adopts food grade stainless steel sheath, offers strong protection, comply with food hygiene

requirements, suitable for food pH testing.

⚫ Blue gel inner solution, does not flow and will not cause bubble.

⚫ Maintenance-free polymer electrolyte, non-diaphragm structure.

⚫ Long life reference system, has better stability and service life.

1 Technical Data

Measuring Range

(0 ~ 14) pH

Electrolyte

Polymer

Temperature

Range

(0 ~ 80)°C

Soaking Solution

3M KCl

Membrane Type

Membrane

Resistance

<250MΩ

Shaft Material

Food-Grade Titanium

Electrode Dimension

Electrode (Ø12×115) mm

Measuring Tip(Ø6×50) mm

Reference

Long Life

Connector

BNC

Junction

Ceramic+Single Pore

Cable

Ø3×1m

2 Usage and Maintenance

2.1 Connect BNC plug to the input on the pH meter.

2.2 When measuring, please unscrew the bottle cap, pull out the electrode and rinse it with

deionized water. After using, please put the electrode back into the bottle and screw tight the

cap.

2.3 The electrode must be soaked in Protelyte solution for storage. Because after long time

Before pulling out or putting back the electrode,

make sure to fully loosen the blue cap on the

storage sleeve so that the electrode can move in

and out smoothly.

exposure in air, Polymer electrolyte will cause shrinkage.

2.4 The electrode’s measuring tip should be soaked in the soaking bottle containing certain amount

of Protelyte soaking solution to keep the membrane hydrated and junction unblocked. Clean

the bottle and replace the storage solution if the storage solution gets turbid and mildewed.

The electrode should never be sinked in pure water or buffer solution for long.

2.5 The connector of the electrode should keep clean and dry. If being contaminated, please clean

it with medical cotton and absolute alcohol and blow dry to prevent the short circuit of the

electrode and slow reaction of electrode.

2.6 Spear pH Electrode is suitable for measure wet solid or semi-solid medium. Please forcibly

even when piercing, to prevent damage of the electrode. In case the sample medium is too

hard (such as meat and fruit); please cut a small hole before piercing the electrode into it.

2.7 After 1-year of use, we recommend replacing the electrode to ensure the best accuracy.

3 Warranty

We warrant this electrode free from defects in material and workmanship and agrees to repair or

replace free of charge, at option of APERA INSTRUMENTS any malfunctioned or damaged product

attributable to responsibility of APERA INSTRUMENTS for a period of six months. Warranty period

is the time limit to provide free service for the products purchased by customers, not the service life

of the tester or electrodes.

This limited warranty does not cover any damages due to:

transportation; storage; improper use; failure to follow the product instructions or to perform any

preventive maintenance; modifications; combination or use with any products, materials, processes,

systems or other matter not provided or authorized in writing by us; unauthorized repair; normal wear

and tear; or external causes such as accidents, abuse, or other actions or events beyond our

reasonable control.

APERA INSTRUMENTS (Europe) GmbH

Address: Wilhelm-Muthmann-Str.18,

42329 Wuppertal, Germany

Phone: +49 202 51988998

Website: www.aperainst.de

Email: info@aperainst.de

Table des matières

Autres manuels Apera Instruments Instrument de mesure

Apera Instruments

Apera Instruments TN400 Manuel utilisateur

Apera Instruments

Apera Instruments PH60 Manuel utilisateur

Apera Instruments

Apera Instruments PH60Z-MS Manuel utilisateur

Apera Instruments

Apera Instruments PHB-3 Manuel utilisateur

Apera Instruments

Apera Instruments LabSen 823 Manuel utilisateur

Apera Instruments

Apera Instruments SX731 Manuel utilisateur

Apera Instruments

Apera Instruments LabSen 753 Manuel utilisateur

Apera Instruments

Apera Instruments MP511 Manuel utilisateur

Apera Instruments

Apera Instruments DO8500 Manuel utilisateur

Apera Instruments

Apera Instruments LabSen 221 Manuel utilisateur

Apera Instruments

Apera Instruments SX610 Manuel utilisateur

Apera Instruments

Apera Instruments LabSen 851-H Manuel utilisateur

Apera Instruments

Apera Instruments WS100 Manuel utilisateur

Apera Instruments

Apera Instruments EC700 Manuel utilisateur

Apera Instruments

Apera Instruments SX823-B Manuel utilisateur

Apera Instruments

Apera Instruments SX736 Manuel utilisateur

Apera Instruments

Apera Instruments TN420 Manuel utilisateur

Apera Instruments

Apera Instruments LabSen 211 Manuel utilisateur

Apera Instruments

Apera Instruments GroStar AI101G Manuel utilisateur

Apera Instruments

Apera Instruments SX751 Manuel utilisateur

Apera Instruments

Apera Instruments WS100 Manuel utilisateur

Apera Instruments

Apera Instruments Premium Series Manuel utilisateur

Apera Instruments

Apera Instruments PH850 Manuel utilisateur

Apera Instruments

Apera Instruments 2310T-F Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur