Antari WiFi-800 Manuel utilisateur

WiFi-800 USER MANUAL

2013 Antari Lighting and Effects Ltd.

English ‧中文

User Manual

Congratulations on the purchase of your new

ANTARI WiFi-800 FOG MACHINE.

Introduction

Thank you for choosing ANTARI WiFi-800 Fog Machine. You now own a state-of-the-art

machine. Prior to use, we suggest that you carefully read all of the instructions. By following

the suggestions found in this user manual, you can look forward to the reliable and

satisfactory performance of your ANTARI Fog Machine for years to come.

Please follow these operation, safety and maintenance instructions to ensure a long and

safe life-time for your fog machine.

CAUTION:

Risk of electric shock. Disconnect the appliance from the electric supply before

refilling liquid, cleaning or performing maintenance on the machine.

Danger of Electric Shock

♦Household Use only. Not designed for outdoor use.

♦Use grounded electrical outlet only. Prior to use take care to determine that the unit is

installed at the rated voltage.

♦Always unplug yourANTARI Fog Machine before filling its liquid tank.

♦Always keep fog machine in upright position.

♦Turn off or unplug the machine when not in use.

♦This machine is not water-proof. Keep this device dry.Don’t immerse in water .If moisture,

water, or fog fluid gets inside the housing, immediately unplug the unit and contact a

authorized service technician or yourANTARI dealer before using it again.

♦No user serviceable parts inside. Refer to yourANTARI dealer or qualified service

personnel.

Danger of Burns

♦This device is for adult use only and must be installed out of the reach of children. Never

leave the unit running unattended.

♦Never aim the output nozzle directly at people.

♦Fog machine output is very hot. Avoid coming within 60 cm of the output nozzle during

operation.

♦Locate the fog machine in a well-ventilated area. Never cover the unit’s vents. In order to

guarantee adequate ventilation, allow a free air space of at least 20 cm around the sides

and top of the unit.

♦Never aim the output nozzle at flames.

♦If the supply cord is damaged, it must be replaced by manufacturer or its service agent or

qualified personnel in order to avoid a hazard.

♦Always let your ANTARI Fog Machine cool down before cleaning or service.

Danger of Explosion

♦Never add flammable liquids (such as oil, gas, perfume) to the fog liquid tank.

♦Use only high-quality, water-based fog liquid that your dealer recommends. Other fog

liquids may cause clogging or damage fog machine.

♦Always make sure there is sufficient liquid in the tank. Operating this unit without liquid

will cause damage to the pump as well as over-heating of the heater.

♦If your ANTARI fog machine fails to work properly, discontinue use immediately. Drain

all fog liquid from the tank, pack the unit securely (preferably in the original packing

material), and return it to yourANTARI dealer for service.

♦Always empty fluid tank before posting or transporting this unit.

♦Never drink fog liquid. If it is ingested, call a doctor immediately. If fog liquid comes in

contact with skin or eyes, rinse thoroughly with water.

Note: Pay attention to all warning labels and instructions printed on the exterior of your

ANTARI Fog Machine

Unpacking & Inspection

Open the shipping carton and verify that all equipment necessary to operate the system has

arrived intact.

The shipping carton should contain the following items:

1. One unit of Antari WiFi-800 Fog Machine

2. Power cord

3. User Manual

If any equipment is missing contact your ANTARI dealer immediately.

Before beginning your initial setup on ANTARI WiFi-800 Fog Machine, make sure that there

is no evident damage caused by transportation. In the event that the unit’s housing or

cable is damaged, do not plug it in and do not attempt to use it until after contacting your

ANTARI dealer for assistance.

Setting Up

Step 1: Place the machine on a flat surface and in a suitable large area with at least 50 cm

open space around the machine.

Step 2: Fill the fluid tank with Antari approved fluid.

Step 3: Connect the machine to suitable rated power supply. To determine the power

requirement for the machine refer to the label on the back of the machine.

Step 4: Turn on the machine and allow it to heat up, while the machine is heating up the

LED status light on pushbutton will “Flash Red”. Heat up takes approximatly 2 mintues.

Once the machine has reached operating temperature, the status LED will light “Solid Red”.

Now the machine is ready for operation.

Step 5: To start making smoke, press the pushbutton locates on the handle; release

pushbutton to stop.

Step 6: To turn off the machine, put the power switch to the OFF position.

iOS Operation

Downloading the application

WiFi 800 using your iPhone or iPad.

Connecting iPhone/iPad to WiFi 800

Step 1: On your iPhone/iPad, select Settings > Wi-Fi > list of available Wi-Fi device will be

showed.

Step 2: Select WIFI800-XXXXXXXX, “XXXXXXXX” indicate the serial number of the

machine, is also the default SSID and password.

Step 3: Enter password to connect to the machine, and wait until the network name is

checked.

Controlling

The Fog 800 application provides you two ways control your WiFi 800 fog machine:

Timer Mode – allows you to set smoke duration time. Slide the time bar (from 1 to 60

seconds), press ON to start making smoke. Smoke will stop once the timer count down to

zero.

Continuous Mode – simply press the ON button to make smoke. The machine continuously

make smoke, to stop press the OFF button.

Note: If ON button is pressed and machine can not make smoke, please make sure the

continuous cycle button is turn on

Wi-Fi Advance Setting

Aweb-based configuration allows you to make customize configuration to your Wi-Fi setting.

To start configuration first make Wi-Fi connection with the machine, then open a web

browser, enter http://192.168.16.254 and when login window appears enter default user

name admin and password admin

Wireless settings > Basic

Radio On/Off

Turn radio signal on or off

On default

Off

WiFi On/Off

Turn WiFi signal on or off

On default

Off

Network Mode

Select one of the following that meets your clients

11b/g mixed mode

11b only

11g only

11b/g/n mixed mode default

11n only(2.4G)

Network Name(SSID)

The name of your wireless network, create a name

for your wireless network using up to 32 characters.

Broadcast Network

Name(SSID)

Enable is default setting. If Disable is selected, the

SSID of the machine will not be seen. The wireless

client will have to know the SSID in order to connect

to it.

AP Isolation

Preventing devices connected toAP from

communicating directly with each other. Default is

set to Disable.

Frequency (Channel)

Select transmitting frequency.

Wireless Settings > Security

SSID choice

Select a SSID to start configuration

Security Mode

Choose one of the following mode for data

protection:

Disable

OPENWEP

WPA-PSK

WPA2-PSK

Autres manuels pour WiFi-800

Table des matières

Autres manuels Antari Machine à brouillard

Antari

Antari B-100 Manuel utilisateur

Antari

Antari FT-50 Manuel utilisateur

Antari

Antari S-500 Manuel utilisateur

Antari

Antari CINEMA HAZE CH-1 Manuel utilisateur

Antari

Antari Z-1520 RGB Manuel utilisateur

Antari

Antari FT-100 Fire Training Manuel utilisateur

Antari

Antari LCU-2S Manuel utilisateur

Antari

Antari M-11 Manuel utilisateur

Antari

Antari DNG-200 Manuel utilisateur

Antari

Antari Fogger X-510II Manuel utilisateur

Antari

Antari FT-100 Fire Training Manuel utilisateur

Antari

Antari Z-1520 RGB Manuel utilisateur

Antari

Antari MOBILE MB-1 Manuel utilisateur

Antari

Antari F-6 Manuel utilisateur

Antari

Antari M-9 RGBAW Manuel utilisateur

Antari

Antari Z Series Manuel utilisateur

Antari

Antari FT-200 Manuel utilisateur

Antari

Antari Z-Stream Manuel utilisateur

Antari

Antari IP-1600 Manuel utilisateur

Antari

Antari B-100X Manuel utilisateur

Antari

Antari Z-380 Manuel utilisateur

Antari

Antari M-5 Manuel utilisateur

Antari

Antari M-1 Manuel utilisateur

Antari

Antari F-1 Fazer Manuel utilisateur

Manuels Machine à brouillard populaires d'autres marques

Boost

Boost BOOST-FOG400LED-BK Manuel utilisateur

Home Accents Holiday

Home Accents Holiday FM1000-ASH Manuel utilisateur

EuroLite

EuroLite ZEITGEIST FOG-1200 Manuel utilisateur

Dyna-Fog

Dyna-Fog CYCLONE ULTRA 2734 Manuel utilisateur

PROEL

PROEL DRAGO HEAVY PLFD150HY Manuel utilisateur

Sparklyn

Sparklyn Y846 Manuel utilisateur

Magicfx

Magicfx CO2 Gun Manuel utilisateur

Ibiza

Ibiza LSM500LAS Manuel utilisateur

Venue Lighting Effects

Venue Lighting Effects ULTRA MINI-FOGGER Manuel utilisateur

High End

High End F-100 Manuel utilisateur

Chauvet

Chauvet ARENA 2100 FLEX Manuel utilisateur

Beamz

Beamz F1600 Manuel utilisateur

Sagitter

Sagitter SG ARS900C Manuel utilisateur

KISANKRAFT

KISANKRAFT KK-STF-480 Manuel utilisateur

Orion

Orion OT-U250PP Mode d’emploi

Beamz

Beamz S2500 Manuel utilisateur

American DJ

American DJ Dyno-Fog II Manuel utilisateur

JB Systems

JB Systems FX 1700 Manuel utilisateur