Antari FT-100 Fire Training Manuel utilisateur

FT-100

Fire Training Fog Machine

User Manual

- English

-中文

 
0
 
 
 
 
 
 
Introduction ................................................................................................................................................. 1
Safety Information....................................................................................................................................... 1
Package Contents & Inspection................................................................................................................... 2
Machine Details........................................................................................................................................... 3
Technical Label Information........................................................................................................................ 3
Fog Fluid...................................................................................................................................................... 3
Setting and Manual Operation..................................................................................................................... 4
Control Settings ........................................................................................................................................... 4
DMX Connection ........................................................................................................................................ 5
WTR-20 Wireless Remote (Standard)......................................................................................................... 5
Z-3 Cable Remote (Optional) ...................................................................................................................... 6
Service and Maintenance............................................................................................................................. 6
Technical Specifications .............................................................................................................................. 7
Warranty Disclaimer.................................................................................................................................... 7
Machine Dimension..................................................................................................................................... 8
前言............................................................................................................................................................. 9
安全注意事項............................................................................................................................................. 9
包裝內容與檢查....................................................................................................................................... 10 
機器訊息....................................................................................................................................................11 
技術標籤資訊............................................................................................................................................11 
煙霧水........................................................................................................................................................11 
設定與手動操作說明............................................................................................................................... 12 
控制設定................................................................................................................................................... 12 
DMX 說明................................................................................................................................................. 13 
WTR-20 無線控制器(標配)..................................................................................................................... 14 
Z-3 有線控制器(選配).............................................................................................................................. 14 
維護和保養............................................................................................................................................... 15 
技術規格................................................................................................................................................... 15 
保固聲明................................................................................................................................................... 15 
機器尺寸圖............................................................................................................................................... 16 
Appendix I – Grounding Instruction.................................................................................................................. 17 
 
 

User Manual

1. Introduction

Please read all the user manual before operating the machine, and place the manual where the user can refer to it at

all time. The manual includes how to install and operate the machine under safe condition and explain all the labels

printed on the machine. If you encounter any problem, contact your local Antari dealer for assistant immediately.

2. Safety Information

DANGER

If the danger is not avoided, it will cause death or serious injury

WARNING

If the warning is not heeded, it can cause death or serious injury.

CAUTION

If the precaution is not taken, it may cause minor or moderate injury.

DANGER

Must connect the machine to the correct rated voltage or it might lead to an electrical shock or a burn and may

cause serious consequences.

Must connect the machine to a protected circuit and ensure it is properly grounded to avoid the risk of

electrocution. For grounding instruction, please refer to Appendix I on page 17.

Do not operate the machine with a bundled power cord, it could lead to a fire hazard.

When operating the machine, do not point at people, animals, or fire.

WARNING

Machine’s nozzle is extremely hot, please keep at least 50cm distance from the nozzle when the machine is

running.

Please operate the machine on a flat, level hard and well ventilated surface area, reserve at least 50cm space

around the machine and make sure there is no flammable gas or material nearby.

Do not disassemble, repair or modify the machine, it may cause damages, malfunction, risk of electrical shock

or result in fire.

The machine can only be operated by adults or professionals, is not intended for use by person with reduced

physical sensory, mental capabilities, or lack of experience and knowledge including children.

Do not leave the machine running unattended, make sure all powers are off when leaving.

Children should be supervised to ensure that they do not play with the machine.

Do not use the machine upside down or tilt it, it might cause damages or malfunction.

Please store the fluid inside in a well ventilated area without direct sunlight and keep out of reach of children.

In case of eye contact or accidentally swallow the fluid, please seek medical attention immediately.

CAUTION

Keep the machine dry at all time. The machine is not waterproof, do not expose the machine to water, rain, or

moisture environment.

Please make sure the power outlet is not damaged or loose before plug in the power cord.

If the power cord is damaged, it must be replaced by Antari or its local dealers, otherwise the warranty will be

void.

Before operating the machine, please sure the fluid is filled in the fluid tank to avoid the pump in idling state

which could lead to overeat or malfunction.

Before transporting the machine, please make sure the fluid is drained and tank is empty. (Recommend using

original package)

The machine is for indoor use only.

Do not operate the machine in any area with unstable voltage.

If you experience strange sound or malfunction, turn off the power and unplug the power cord immediately

and contact your local Antari dealer for assistant.

Do not contact any moving part.

Only use accessories recommended or sold by Antari.

Please make sure the power is off when not using the machine and unplug the power cord if not intend to use

for a long period of time.

To disconnect, turn all controls to the off position, then remove plug from outlet.

Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

Unplug from outlet before servicing or cleaning.

Do not operate the machine with a damaged cord or plug, or after the machine malfunctions or is dropped or

damaged in any manner. Return machine to the nearest authorized service facility for examination, repair, or

electrical or mechanical adjustment.

To ensure the lifespan of the machine, please only use the fluid manufactured by Antari, do not use other fluid

or additive, otherwise it may clog the heater and cause malfunction.

Before operating the machine, please read all warning labels on the machine, description as below;

Top Cover Printing

WARNING!

HOT NOZZLE!

KEEP AT LEAST 50 CM DISTANCE

REMINDER

USE ANTARI LIQUID ONLY OR ONLY USE DEALER RECOMMENED FOG FLUID.

NEVER ADD FLAMMABLE SUBSTANCES.

Back Cover Printing

WARNING!

DISCONNECT POWER BEFORE CHANGING FUSE

USE ONLY WITH ADULT SUPERVISION

DO NOT OPERATE WITHOUT LIQUID

FOR INDOOR USE ONLY. KEEP DRY

NO USER SERVICEABLE PARTS INSIDE

3. Package Contents & Inspection

3.1 Package Contents

Immediately upon receiving the machine, carefully unpack the carton, check the content to ensure it is the correct

model and all parts are included. If any part appears to be damaged or missing during transportation, please contact

your local dealer and return in original package for inspection.

1 x FT-100 Fire Training Fog Machine

1 x 6 Liter Fluid Tank

1 x WTR-20 Wireless Remote

1 x Neutrik powerCON Power Cable

1 User Manual or Scan QR Code on the Machine

3.2 Optional Accessories

Item Code

Description

Z-3

Cable Remote

4. Machine Details

01. Nozzle

06. Neutrik powerCON Connector

02. 6 Liter Fluid Tank

07. Remote Connector

03. W-2 Wireless Receiver

08. XLR 5-Pin Connector (DMX)

04. Power Switch

09. LCD Display

05. Breaker

10. Rotary Knob

5. Technical Label Information

Please read the technical label information on the back of the machine before operating it.

1. Model Name

5. Breaker/Fuse

2. Input Voltage

6. QR CODE for User Manual

3. Frequency

7. Serial No.

4. Rated Power

6. Fog Fluid

CAUTION!

Always turn off the power before filling the fluid tank. Do not add flammable

liquid to the fluid tank. If fluid gets inside the machine, please contact your local

Antari dealer for assistant.

Only the fog fluid manufactured by Antari can be used, do not mix or dilute the fog fluid. Due to improper

storage or using other fluid might clog the heater and cause malfunction.

The machine is tested and calibrated with the specific fog fluid to get the best performance.

Please empty the fluid in the tank before switching to another fluid to avoid mixing.

Only the essence manufactured by Antari can be used, and add according to the ratio recommended by Antari

(Recommended ratio is 1:1000), if using other essence or different ratio might clog the heater and cause

malfunction.

The warranty on your fog machine will be void if you use fog fluid not manufacture by Antari.

7. Setting and Manual Operation

WARNING

Machine falling off might cause serious injury, please make sure it is secure

and firm on the overhead.

Step 1. Place the machine on a flat, level hard and well ventilated surface area and reserve at least 50cm open

space around the machine, and make sure there is no flammable gas or material nearby;

Step 2. Fill the fluid tank with Antari approved fog fluid, and make sure the tube is not twisted;

Step 3. Connect the machine to the power outlet. Please read the technical label on the back of the machine and

make sure the power outlet is the correspond to the rated voltage for the machine;

Step 4. Turn on the machine, warm up process takes approximately 8.5 minutes. Once the machine has reached

operating temperature, the LCD display will show “Ready To Fog”. Now the machine is ready for

operation;

Step 5. Please refer to “8. Control Settings” for operating instruction;

Step 6. To turn off the machine, please make sure the machine is not operating then turn of the power. If you will

not use the machine a long period of time, please remove the power cord.

8. Control Settings

FT-100 Fire Training Fog Machine can be operated in the following modes. The machine can only accept 1 type of

signal at a time. When using different control modes at the same time, the machine will work according to built-in

control priority as follow:

Manual

Timer

DMX512

Wireless

Cable Remote

8.1 Control Panel Description

[TIMER] knob Middle is LCD Display [VOLUME] knob

Fogging in Timer Mode

Rotary Knob

Operating Method

Action

TIMER knob (Left)

Press Once

Activate Timer Mode

VOLUME knob (Right)

Press Once

Deactivate Timer Mode

VOLUME knob (Right)

Rotate

Adjust Output Volume

Fogging in Volume Mode

Rotary Knob

Operating Method

Action

VOLUME knob (Right)

Press Once

Activate Volume Mode

VOLUME knob (Right)

Press Once

Deactivate Volume Mode

VOLUME knob (Right)

Rotate

Adjust Output Volume

Menu and Setting

Rotary Knob

Operating Method

Action

TIMER knob (Left)

Press and Hold for 3 seconds

Enter Setting Menu

TIMER knob (Left)

Rotate

Scroll Through Menus

TIMER knob (Left)

Press once

Enter/Confirm Selection

TIMER knob (Left)

Rotate

Adjust for Preferred Value

VOLUME knob (Right)

Press once

Return to Previous Page

8.2 Menu Options Description

Options

Description

Timer Interval xxx S

Set Interval Time from 5-200 sec

Timer Duration xxx S

Set Duration Time from 1-200 sec

Timer Output xxx%

Set Output Volume from 1-100%

Volume Output xxx%

Set Output Volume from 1-100%

DMX512 Address:xxx

Set DMX Address from 001-512

Wireless ON

Turn ON/OFF Wireless Function

Fluid Sensor Set ON

Turn ON/OFF Fluid Sensor

W-DMX Power

Turn ON/OFF W-DMX Function

Run Last Setting OFF

Turn ON/OFF Memory Mode (Turn ON, the machine will remember last setting)

Keypad Sound

Turn ON/OFF Rotary Knob Sound

Wireless Detect Pair

Pair or Unpair Wireless Remote

Nonstop Burst OFF

Turn ON/OFF Nonstop Burst Function (Turn ON, continous fogging nonstop)

9. DMX Connection

9.1 DMX Connector Pin Assignment

This machine has a XLR 5-Pin connector for DMX connection. The diagram below indicates pin assignment

information;

Function

Ground

Data-

Data+

N/A

**There is a protection cap on DMX IN, please

remove it with your finger before operation.

9.2 DMX Channel Function

1 Channel Mode

DMX Value Range

Function

Channel 1

Fog Output Level

0 – 4

Off

5 – 255

1 – 100%

10. WTR-20 Wireless Remote (Standard)

WTR-20 Wireless Remote is a standard accessory for FT-100 Fire Training Fog Machine, it included a W-2

wireless transmitter and a W-2 wireless receiver (Installed on the Machine), it’s ready to use. If you encounter any

problem, please contact your local Antari dealer for assistant.

10.1 W-2 Wireless Transmitter & Receiver

Battery：27A 12V

Effective Range：The effective range is approximately 50

meter, depends on actual condition, it may vary.

If effective range is significantly shorter, please change battery.

W-2 wireless transmitter has 4 buttons, each function as follow:

W-2 Wireless Transmitter

W-2 Wireless Receiver

(Installed on the Machine)

Button

Function

[A]

Start Fogging

[B]

Stop Fogging

[C]

Increase Fog Output

[D]

Decrease Fog Output

10.2 Pair & Unpair

Each receiver can pair up to 5 transmitters, please follow the steps below to pair or unpair the transmitter;

Step 1. Press and hold the [TIMER] knob for 3 seconds to enter menu;

Step 2. Rotate the [TIMER] knob to [Wireless Detect];

Step 3 Start to pair or unpair the transmitter according to the instruction.

11. Z-3 Cable Remote (Optional)

Z-3 Cable Remote is an optional accessory for FT-100 Fire Training Fog Machines, please see instruction below;

1. Plug the cable remote to the connector on the back of the machine, red indicator light on (Power);

2. Press the switch (Orange Indicator Light On); turn the knob to adjust the output to start fogging;

3. Press the switch (Orange Indicator Light Off), or turn the knob to far left to stop fogging.

** If you encounter any problem, please contact your local Antari dealer for assistant

12. Service and Maintenance

DANGER

Disconnect the power cord before starting maintenance operation!

Always keep the machine clean and dry.

Can use air compressor, vacuum or a soft brush to remove the dust on the machine.

Can use a slightly damp cloth to clean the casing.

Before store the machine, please make sure the machine is completely cool down to avoid moisture inside

causing malfunction.

It is recommended to run the machine at least once a month in order to maintain the machine’s best

performance and output condition.

Excessive dust and build up liquid residue will reduce the performance and cause overheat.

12.1 Breaker Reset

Please follow the instructions below to reset the breaker;

Step 1. Disconnect AC power

Step 2. Flip break back to position

Step 3. Turn on machine for testing

**If the breaker still jumps off after reset, please contact your local Antari dealer for

assistance.

Breaker Specification

120V = 15A 250V

240V = 7A 250V

13. Technical Specifications

FT-100

Input Voltage

US Model: AC 100-120V, 50/60Hz 13.0A

EU Model: AC 220-240V, 50/60Hz 6.5A

Rated Power

120V 1500W

240V 1450W

Warming-up Time

8.5 minutes (approx.)

Fluid Consumption

100 ml/min (100% output)

Fluid Tank Capacity

6 Liters (1.59 Gallon)

Compatible Fluid

Antari FLP Fire Training Fog Fluid

Ambient Temp. Range

0°C – 40°C (32°F – 104°F)

Control Methods

Manual、Timer、DMX512、Wireless、Cable Remote (Optional)

Interface

XLR 5-Pin Connector (DMX)、Neutrik powerCON Connector (Power)

DMX Channels

1 Channel

Included Accessories

WTR-20 Wireless Remote

Optional Accessories

Z-3 Cable Remote

Dimension

L 580 W 279 H 331 mm (L 22.83 W 10.99 H 13.03 inch)

Weight

14.6 kg (32.19 lbs.)

14. Warranty Disclaimer

We guarantee the merchandise manufactured by us to be free from defect in material and workmanship for a period

of one year. Our obligation and liability under this warranty shall be restricted to repair or replacement at our

factory or local authorized dealer. We assume no liability of the products that are improperly used or used for any

purpose other than that for which they are specially designed. This warranty shall not apply to any merchandise

which has been repaired, altered or assembled outside our factory in any way so as in our judgment to affect its

performance, nor which has been subjected to misuse, negligence, or accident nor to any merchandise operated

contrary to our printed instructions. We will not allow or be liable of any loss or any damages of any kind in

connection with the use, sale, or repair of any merchandise purchased from us.

15. Machine Dimension

Autres manuels pour FT-100 Fire Training

Table des matières

Autres manuels Antari Machine à brouillard

Antari

Antari IP-1600 Manuel utilisateur

Antari

Antari Fazer X-310 PRO Manuel utilisateur

Antari

Antari F-5D Fazer Manuel utilisateur

Antari

Antari Onboard DMX Manuel utilisateur

Antari

Antari M-7X Manuel utilisateur

Antari

Antari X FAZER Manuel utilisateur

Antari

Antari M-7 RGBA Manuel utilisateur

Antari

Antari Z-1000II Manuel utilisateur

Antari

Antari Ip-1000 Manuel utilisateur

Antari

Antari F-80Z Manuel utilisateur

Antari

Antari F-6 Manuel utilisateur

Antari

Antari F-7X Manuel utilisateur

Antari

Antari FT-55 Manuel utilisateur

Antari

Antari M-5 Manuel utilisateur

Antari

Antari Z-1500II Manuel utilisateur

Antari

Antari FT-100 Fire Training Manuel utilisateur

Antari

Antari FT-100 Fire Training Manuel utilisateur

Antari

Antari X FAZER Manuel utilisateur

Antari

Antari FT-20X Manuel utilisateur

Antari

Antari CINEMA HAZE CH-1 Manuel utilisateur

Antari

Antari FT-100 Fire Training Manuel utilisateur

Antari

Antari W-515 Manuel utilisateur

Antari

Antari ICE Manuel utilisateur

Antari

Antari MOBILE MB-55 Manuel utilisateur

Manuels Machine à brouillard populaires d'autres marques

Boost

Boost BOOST-FOG400LED-BK Manuel utilisateur

Home Accents Holiday

Home Accents Holiday FM1000-ASH Manuel utilisateur

EuroLite

EuroLite ZEITGEIST FOG-1200 Manuel utilisateur

Dyna-Fog

Dyna-Fog CYCLONE ULTRA 2734 Manuel utilisateur

PROEL

PROEL DRAGO HEAVY PLFD150HY Manuel utilisateur

Sparklyn

Sparklyn Y846 Manuel utilisateur

Magicfx

Magicfx CO2 Gun Manuel utilisateur

Ibiza

Ibiza LSM500LAS Manuel utilisateur

Venue Lighting Effects

Venue Lighting Effects ULTRA MINI-FOGGER Manuel utilisateur

High End

High End F-100 Manuel utilisateur

Chauvet

Chauvet ARENA 2100 FLEX Manuel utilisateur

Beamz

Beamz F1600 Manuel utilisateur

Sagitter

Sagitter SG ARS900C Manuel utilisateur

KISANKRAFT

KISANKRAFT KK-STF-480 Manuel utilisateur

Orion

Orion OT-U250PP Mode d’emploi

Beamz

Beamz S2500 Manuel utilisateur

American DJ

American DJ Dyno-Fog II Manuel utilisateur

JB Systems

JB Systems FX 1700 Manuel utilisateur