Antari FT-100 Fire Training Manuel utilisateur

FT-100 Fire Training

Fog Machine User Manual

English

User Manual - English

Safety Information

Please read the following safety information carefully before operating the

machine. Information includes important safety information about installation,

usage, and maintenance. Pay attention to all warning labels and instructions in

this manual and printed on the machine.

If you have questions about how to operate the machine safely, please contact your local

Antari dealer for help.

․Keep this device dry.

․Always connect to a grounded circuit to avoid risk of electrocution.

․Before connecting machine to power, always check voltage indicate on machine match

to your local AC voltage. Do not use the machine if AC power voltage does not match.

․Disconnect the machine from AC power before servicing and when not in use.

․This product is for indoor use only! Do not expose to rain or moisture. If fluid is spilled,

disconnect AC power and clean with a damp cloth. If fluid is spilled onto electronic parts,

immediately unplug the machine and contact your local Antari dealer for advice.

․No user serviceable and modifiable parts inside. Never try to repair this product,

unauthorized technician may lead machine to damage or malfunction.

․For adult use only. Never leave the machine running unattended.

․Installed in well ventilated area. Provide at least 50 cm space around the machine.

․Never add flammable liquid of any kind to the machine.

․Make sure there are no flammable materials close to the machine while operating.

․Only use Antari fluid. Other fluid may lead to heater clog and malfunction.

․If the machine fails to work, unplug the machine and stop operation immediately.

Contact your local Antari dealer for advise.

․Before transporting the machine, make sure the fluid tank is completely drained.

․Smoke fluid may present health risks if swallowed. Do not drink smoke fluid. Store it

securely. In case of eye contact or if fluid is swallowed immediately look for medical

advice.

Unpacking and Inspection

Immediately upon receiving the machine, carefully unpack the carton, check all content to

ensure that all parts are present and have been received in good condition. If any parts

appear damaged or mishandled from shipping, notify the shipper immediately and retrain the

packing material for inspection.

What is included: 1 x FT-100 Fog Machine

1 x W-1 Wireless Remote

1 x Power Cord

1 x User Manual

Product Dimension

Product Overview

XLR 5-Pin DMX Connector

Remote Control (Z-3 Remote)

Wireless Reciver

(W-1 Wireless Remote)

Two rotary knobs

Timer / Volume

580 mm

264.5 mm

278.2 mm

Setting Up

Step 1: Place the machine on a flat surface and in a suitable large area with at least 50 cm

open space around the machine.

Step 2: Fill the fluid tank with Antari approved fluid.

Step 3: Connect the machine to suitable rated power supply. To determine the power

requirement for the machine refer to the label on the back of the machine.

Always connect the machine to a protected circuit and ensure it is properly

grounded to avoid risk of electrocution.

Step 4: Turn on the machine and allow it to heat up. Heat up takes approximatly 10 mintues.

Once the machine has reached operating temperature, the LCD display will show “Ready To

Fog”. Now the machine is ready for operation.

Step 5: To start making fog, locate the rotary knob on the right side of control panel, and

press the rotary knob to start making fog.

Step 6: To turn off the machine, press rotary knob again button and turn Powercon to the

OFF position.

Operation

Control Panel Operation

The machine can be operated with onboard digital control interface

Operation - Timer Mode

Rotary knob Action Description

Left Press once Activate timer mode

Right Press second time Deactivate timer mode

Right Rotate Adjust output volume

Operation – Volume Mode

Rotary knob Action Description

Right Press once Activate volume mode

Right Press second time Deactivate volume mode

Right Rotate Adjust output volume

Setting

Rotary knob Action Description

Left Press and hold for 3

seconds

Enter setting menu

Left Rotate Scroll through menus

Left Press Press once to enter

Left Rotate Adjust for preferred value

Right Press Escape from menu

Control Menu

Set interval time from 5 to 200 seconds

Set duration time from 1 to 200 seconds

Set output volume from 1 to 100%

Set DMX address from 1 to 512

Turn ON or OFF wireless remote feature

Turn ON or OFF fluid sensor

Turn ON or OFF wireless DMX module

Turn ON or OFF memory setting. When turn “ON” the machine

will return to its original state before last shut off.

Turn ON or OFF rotary knob sound

Interval Set

XXX S

Duration Set

XXX S

Timer Output

XXX %

Volume Output

XXX %

DMX512

Address:XXX

Wireless

Fluid Sensor Set

W-DMX Power

OFF

Run Last Setting

OFF

Keypad Sound

Pair or un-pair wireless remote

Turn ON or OFF nonstop burst function. Once turn on machine

can produce output continously without reheat

Wireless Operation

Wireless remote control system W-2 consists of a transmitter equipped with four buttons to

activate, deactivate, increase and decrease fog output and an onboard receiver attached to

the rear panel of FT-100 fog machine.

W-2 Wireless Transmitter

Press [A] button to emit fog. Press [B] button to stop. Press [C] button to increase output

volume. Press [D] button to decrease output volume.

In a free open space the effective distance is 50 meters, actual usage depending on

obstacle level the effective distance is 10-25 meters.

Wireless Receiver

Wireless Detect

Pair

Nonstop Burst

OFF

Registering transmitter

Transmitter can be pair or deleted from the receiver. Each receiver can pair up to 5

transmitters. Follow below steps to pair or delete transmitter from receiver.

Step 1: Press and hold left rotary knob for 3 seconds to enter setting menu

Step 2: Rotate the rotary knob to find “Wireless Detect” menu

Step 3: Follow the menu instruction to pair or delete transmitter

Transmitter battery replacement

If effective distance seems to be decreased, it is possible the battery level are low and

require replacement. In order to replace the battery, undo the three screws on the back of

transmitter to release the cover. Replace with same type and specification of battery which is

27A 12V

DMX Connector Pin Assignment

The machine provide 3 or 5 pin XLR connector for DMX connection. Diagram below indicate

pin assignment information

Pin Function

1 Ground

2 Data-

3 Data+

DMX Channel Function

Channel 1 DMX Value Range Function

Fog 0 – 4

5 – 255

Fog Off

Output 1-100%

Fluid

Only use Antari FLP water-based liquid for the FT-

100 Fire

Training Fog Machine. The machine is tested and calibrated

with this liquid to get the bes

t output performance. Warranty will

be void if any other type of liquid is used, improper use of liquid

may lead to machine failure and malfunction.

Service and Maintenance

․Do not allow the machine to become contaminated.

․Remove dust from air vents with air compressor, vacuum or a soft brush.

․Only use a damp cloth to clean the casing.

․Before storing run distilled water through the system to help avoid condensing the pump

or heater.

․It is recommended to run the machine on a monthly basis in order to achieve best

performance and output condition.

․Excessive dust, liquid and dirt built up will degrade performance and cause overheating.

Breaker Reset

Disconnect AC power before reset breaker. Only replace fuse with same type

and rating.

Step 1: Disconnect AC power

Step 2: Flip breaker to ON position

Step 3: Turn on machine to test

Breaker

120V = 15A 250V

230V = 7A 250V

Technical Specifications

Input voltage US 120V

EU 230V

UK 240V

JP 100V

Breaker 120V = 15A 250V

230V = 7A 250V

Heater 1500W

Warm-up time 10 min. (approx.)

Output 20,000 cu.ft/min

Max. operating time 1 min at 100% output, 60 mins at continuous output

Fluid tank capacity 6 L

Fluid consumption 100 ml/min

Compatible fluid Antari FLP water-based fluid

Control option DMX 512, Manual, Timer, Wireless remote

DMX channels 1 channels

Power connection Neutrik Powercon

DMX data connection 5-pin XLR

Dimension L 580 x W 278.2 x H 264.5 mm

Dry weight 14.6 kg

Autres manuels pour FT-100 Fire Training

Table des matières

Autres manuels Antari Machine à brouillard

Antari

Antari X-310PRO Manuel utilisateur

Antari

Antari W-508 Manuel utilisateur

Antari

Antari FT-100 Fire Training Manuel utilisateur

Antari

Antari F-2 Fazer Manuel utilisateur

Antari

Antari F-3 Fazer Manuel utilisateur

Antari

Antari FT-50 Manuel utilisateur

Antari

Antari ICE-100 Manuel utilisateur

Antari

Antari B-100 Manuel utilisateur

Antari

Antari HZ-500 Manuel utilisateur

Antari

Antari Z-1000II Manuel utilisateur

Antari

Antari F-5D Fazer Manuel utilisateur

Antari

Antari B-100X Manuel utilisateur

Antari

Antari Z Series Manuel utilisateur

Antari

Antari Z-1520 RGB Manuel utilisateur

Antari

Antari Mobile MB-20 Manuel utilisateur

Antari

Antari HZ-300 Manuel utilisateur

Antari

Antari FT-200 Manuel utilisateur

Antari

Antari PM-1 Manuel utilisateur

Antari

Antari Fog cooler DNG-100 Manuel utilisateur

Antari

Antari FT-20X Manuel utilisateur

Antari

Antari W-715 Fog Jet Manuel utilisateur

Antari

Antari Z-1000X MK3 Manuel utilisateur

Antari

Antari ICE-101 Manuel utilisateur

Antari

Antari M-9 RGBAW Manuel utilisateur

Manuels Machine à brouillard populaires d'autres marques

Boost

Boost BOOST-FOG400LED-BK Manuel utilisateur

Home Accents Holiday

Home Accents Holiday FM1000-ASH Manuel utilisateur

EuroLite

EuroLite ZEITGEIST FOG-1200 Manuel utilisateur

Dyna-Fog

Dyna-Fog CYCLONE ULTRA 2734 Manuel utilisateur

PROEL

PROEL DRAGO HEAVY PLFD150HY Manuel utilisateur

Sparklyn

Sparklyn Y846 Manuel utilisateur

Magicfx

Magicfx CO2 Gun Manuel utilisateur

Ibiza

Ibiza LSM500LAS Manuel utilisateur

Venue Lighting Effects

Venue Lighting Effects ULTRA MINI-FOGGER Manuel utilisateur

High End

High End F-100 Manuel utilisateur

Chauvet

Chauvet ARENA 2100 FLEX Manuel utilisateur

Beamz

Beamz F1600 Manuel utilisateur

Sagitter

Sagitter SG ARS900C Manuel utilisateur

KISANKRAFT

KISANKRAFT KK-STF-480 Manuel utilisateur

Orion

Orion OT-U250PP Mode d’emploi

Beamz

Beamz S2500 Manuel utilisateur

American DJ

American DJ Dyno-Fog II Manuel utilisateur

JB Systems

JB Systems FX 1700 Manuel utilisateur