Antari IP-1500 Manuel utilisateur

IP-1500

Waterproof Fog Machine

User Manual

English

IP-63

Antari IP-1500 Fog Machine User Manual

Thank you for choosing the Antari IP-1500 splash-waterproof Fog Machine. This model is

particularly designed for outdoor applications. The IP protection class is 63. The housing of

the machine is made of solid stainless steel. This makes the machine completely protected

against spray water, and ensures powerful, dry and clean fog in humid and damp

environments. The IP-1500 has an ergonomic design and is very user-friendly.

Prior to use, we suggest that you carefully read all of the instructions. Following the

instructions found in this user manual will ensure your safety while operating the machine,

and easily achieve the most satisfactory light and thin fog effect; it will also make you

understand how to maintain the machine in order to extend the product life cycle.

This machine is spray-waterproof only.

Immersing it in water can damage it.

Danger of Electric Shock

․The IP-1500 is designed for both outdoor and indoor applications. Prior to use, please

verify that an earth leakage circuit breaker (ELCB) is installed.

․Use a grounded electrical outlet. Prior to use, take care to determine that the unit is

installed at the rated voltage.

․Unplug the machine when not in use.

CAUTION

Danger of Burns

․No user serviceable and modifiable parts inside. Do not disassemble the housing nor

do any modification; otherwise damage of the device or danger of burn may be

caused.

․This device is for adult use only and must be installed out of the reach of children.

Never leave the unit running unattended.

․The output nozzle becomes very hot during operation (about 200°C). Position the fog

machine in a well-ventilated area. Please leave about 50 cm space around the

machine.

․Never add flammable liquids of any kind (such as oil, gas, perfume) to the fog liquid.

․Use only dealer-recommended Antari high-quality liquid FLG Heavy Fog Liquid or FLR

Light Fog Liquid. Please do not use any other liquid which may cause erosion of inner

parts.

․Never drink fog liquid. If it is ingested, call a doctor immediately. If fog liquid comes in

contact with skin or eyes, rinse thoroughly with water.

․If your Antari IP-1500 Fog Machine fails to work properly, discontinue use immediately.

Let the machine cool down before packing it securely (preferably in the original

packing material), and returning it to your Antari dealer for service.

Pay attention to all warning labels and instructions printed on the exterior of your

Antari Fog Machine, particularly before initial use and from time to time

whenever necessary.

Unpacking and inspection

Open the shipping carton and verify that all equipment necessary to operate the system

has arrived intact. If any equipment is missing contact your Antari dealer immediately.

Before beginning your initial setup on your fog machine, make sure that there is no evident

damage caused by transportation. In the event that the unit's housing or cable is damaged,

do not plug it in and do not attempt to use it until after contacting your Antari dealer for

assistance.

The shipping carton should contain the following items:

1. IP-1500 fog machine with handle

2. Outdoor power cord 2 meters long

3. Clear color PU pipe including one filter

4. W-1 wireless controller

5. Hanging bracket with screws

6. User Manual

Assembly

1. Open the carton and carefully remove all packing materials.

2. Place the fog machine on a flat surface and make sure that no foreign objects, water or

dust can enter the air vents at the bottom of the machine.

3. Unscrew the fluid inlet, connect the screw with the PU pipe and insert the PU pipe,

then screw back the nut. Make sure they are connected securely.

Setup

TIMER VOLUME

1. Plug the power cord into a grounded electrical outlet. This machine is particularly

designed for outdoor applications. Please pay special attention to the waterproof

feature of the socket.

2. Insert one end of the liquid pipe with filter into a liquid tank, which is to be placed on a

flat surface.

3. The design of this machine does not include an additional power switch. When

connecting the machine to a power outlet it is powered on. The display will indicate

“Antari IP-1500” followed by “Wireless Setup”. During the next 15 seconds, the

machine is in wireless setup mode for registering wireless controllers. It is possible to

Antari

IP-1500

a single controller for parallel control of an unlimited number of machines. Just power

on the machines simultaneously and register the controller. If there is no wireless

controller registered in wireless setup mode, the machine will keep the record of the

previous operation.

In order to register a wireless controller press button A or B. Always direct the

controller towards the receiver underneath the display. When the registration process

is started, a beeping sound will occur followed by a flashing display. After 15 seconds,

the machine exits the wireless setup mode and the display indicates “Wireless Setup

OK”. At this point, no further controller can be added. Then the fog machine starts with

the warm-up process and the display indicates “Warming Up”.

4. The warm-up time takes around 9.5 minutes. While the unit is warming up, fog output

will not be possible yet. Once the warm-up process is completed, the display will

indicate “Ready To Fog” and additionally a “W” for wireless if this function is activated.

Afterwards, the liquid sucking process is indicated on the display. During the initial

start-up, there will repeatedly be air in the liquid pipe that prevents the machine's

sensor from detecting the fog liquid. In this case, the display will indicate “Empty

Fluid”. Please press the button VOLUME at the control panel, in order to force the

machine to draw the liquid from the tank. During this pumping process, the motor will

make a “Bo Bo Bo” noise, which is a normal reaction. Before the sensor can detect the

fluid, the display will switch between “Ready To Fog W” and “Empty Fluid”.

Operation

The built-in control panel on the rear of the machine features an LCD panel displaying all

operation statuses of the fog machine. The control panel allows the user to customize fog

machine functions by adjusting the fogging duration, interval, and volume as well as the

DMX address and the wireless function. There are four buttons on the control board. All

current operating parameters are automatically stored in non-volatile memory, allowing the

machine to be powered down without losing function settings.

Control buttons:

Function / Up / Down / Stop

After warming up and sufficient fluid intake, the display will indicate “Ready To Fog W” and

fog output will be possible. You can now program the necessary menu settings with the

control panel.

1. Menu settings with the button FUNCTION

Setting time intervals for timer operation

Press the button FUNCTION until the display indicates “Interval Set“. Use the

buttons UP and DOWN to adjust the intervals between the individual fog

outputs in timer mode within the range of 1 and 200 seconds.

Setting the output duration for timer operation

Press the button FUNCTION until the display indicates “Duration Set“. Use the

buttons UP and DOWN to adjust the duration of the fog outputs in timer

mode within the range of 1 and 200 seconds.

Setting the fog output volume for timer operation

Press the button FUNCTION until the display indicates “Timer Out“. Use the

buttons UP and DOWN to adjust the fog output volume in timer mode

within the range of 1 % and 100 %.

Setting the fog output volume for continuous operation

Press the button FUNCTION until the display indicates “Volume Output“. Use

the buttons UP and DOWN to adjust the fog output volume in continuous

mode within the range of 1 % and 100 %.

Setting the DMX512 address

Press the button FUNCTION until the display indicates “DMX Address“. Use the

buttons UP and DOWN to adjust the DMX512 start address. Please refer

to chapter DMX512 settings for more information on DMX operation.

Switching the wireless function on and off

Press the button FUNCTION until the display indicates “Wireless On“. Use the

buttons UP and DOWN to deactivate the wireless function (indication

“Wireless Off“) and to reactivate it (indication “Wireless On“).

Turning Fluid Sensor On or Off

Press the button FUNCTION until display indicates “Fluid Sensor”. Use UP

and DOWN to turn the fluid sensor on or off

2. Continuous operation

Press the button VOLUME, to activate continuous fog output. The display

indicates “Volume“ followed by the value that was set in menu item “Volume Output“.

To stop the fog output, press the button VOLUME once again.

3. Timer operation

In the timer mode, the fog machine will automatically emit fog. The time intervals,

duration and fog volume depend on the corresponding menu settings. Press the button

TIMER, to activate the timer mode. The display indicates the set time interval.

The unit counts down to 0 seconds and emits fog. To deactivate the timer mode, press

the button TIMER again.

4. Hibernate Mode

Press the button FUNCTION until the display indicates “Hibernate Mode”.

Use the button UP and DOWN to turn it “ON”or “OFF”. Hibernate

mode is a power saving feature that will automatically shut down when DMX signal

stops and turn machine back on once DMX signal is detected.

W-1 Wireless Controller

With the wireless controller, it is possible to emit fog via radio over a distance of up to 50

meters.

Press button A, to emit fog. The button Ahas the same function as the button

VOLUME on the control panel, i.e. the fog output depends on the setting of menu item

“Volume Output“. The display indicates “Volume“ followed by the defined value. As

additional control, the LED lights.

To stop the fog output, press button B.

DMX Connector Pin Assignment

The machine provide 5 pin XLR connector for DMX connection. Diagram below indicate pin

assignment information

Function

Ground

Data-

Data+

DMX512 Settings

The IP-1500 is equipped with a DMX512 system. For connecting a DMX controller, 5-pin

male-female XLR connections are provided at the back of the machine. The machine uses

one control channel for adjusting the output volume. The channel has a DMX value range

of 0 to 255. After connecting a DMX controller, timer functions such as output duration and

interval can be programmed using the DMX controller or the DMX control software. In DMX

mode, the machine cannot be controlled via the built-in control panel nor the W-1 wireless

controller anymore. By using the DMX protocol, fog machines, lighting effects, and other

special effects machines can be interconnected and easily controlled

DMX VALUE

FUNCTION

0~5

off (no output)

6~249

output volume control (5~95%)

250~255

maximum output volume (100%)

Autres manuels pour IP-1500

Table des matières

Autres manuels Antari Machine à brouillard

Antari

Antari F-450 Manuel utilisateur

Antari

Antari AF-5X Manuel utilisateur

Antari

Antari Z-1020 Manuel utilisateur

Antari

Antari F-5 Fazer Manuel utilisateur

Antari

Antari F-1 Fazer Manuel utilisateur

Antari

Antari Z-1520 RGB Manuel utilisateur

Antari

Antari Z Series Manuel utilisateur

Antari

Antari F-7X Manuel utilisateur

Antari

Antari M-7 RGBA Manuel utilisateur

Antari

Antari Fazer Z-300 Manuel utilisateur

Antari

Antari SW-250 Manuel utilisateur

Antari

Antari Z-1200II Manuel utilisateur

Antari

Antari M-7 RGBA Manuel utilisateur

Antari

Antari W-715 Manuel utilisateur

Antari

Antari Z-80 Manuel utilisateur

Antari

Antari S-100 II Manuel utilisateur

Antari

Antari Z-1000 III Manuel utilisateur

Antari

Antari FT-55 Manuel utilisateur

Antari

Antari Z-390 Series Manuel utilisateur

Antari

Antari IP-1600 Manuel utilisateur

Antari

Antari M-8 Manuel utilisateur

Antari

Antari HZ-500 Instructions d'installation

Antari

Antari FT-200 Manuel utilisateur

Antari

Antari II Series Manuel utilisateur

Manuels Machine à brouillard populaires d'autres marques

Boost

Boost BOOST-FOG400LED-BK Manuel utilisateur

Home Accents Holiday

Home Accents Holiday FM1000-ASH Manuel utilisateur

EuroLite

EuroLite ZEITGEIST FOG-1200 Manuel utilisateur

Dyna-Fog

Dyna-Fog CYCLONE ULTRA 2734 Manuel utilisateur

PROEL

PROEL DRAGO HEAVY PLFD150HY Manuel utilisateur

Sparklyn

Sparklyn Y846 Manuel utilisateur

Magicfx

Magicfx CO2 Gun Manuel utilisateur

Ibiza

Ibiza LSM500LAS Manuel utilisateur

Venue Lighting Effects

Venue Lighting Effects ULTRA MINI-FOGGER Manuel utilisateur

High End

High End F-100 Manuel utilisateur

Chauvet

Chauvet ARENA 2100 FLEX Manuel utilisateur

Beamz

Beamz F1600 Manuel utilisateur

Sagitter

Sagitter SG ARS900C Manuel utilisateur

KISANKRAFT

KISANKRAFT KK-STF-480 Manuel utilisateur

Orion

Orion OT-U250PP Mode d’emploi

Beamz

Beamz S2500 Manuel utilisateur

American DJ

American DJ Dyno-Fog II Manuel utilisateur

JB Systems

JB Systems FX 1700 Manuel utilisateur