Antari LCU-1S Manuel utilisateur
1
LCU-1S
Liquid Control Unit
User Manual
English Français Deutsch • • • 中文
©2018 Antari Lighting and Effects Ltd.
3
User Manual
Safety Information
Please read the following safety information carefully before operating the
machine. This information includes important safeguards about installation,
usage, and maintenance. Pay attention to all warning labels and instructions in
this manual and printed on the machine.
If you have questions about how to operate the machine safely, please contact your local
Antari dealer for help.
․Keep this device dry.
․Always connect to a grounded circuit to avoid risk of electrocution.
․Before connecting the machine to power, always check that the voltage indicated on the
machine matches to your local AC voltage. Do not use the machine if AC power voltage
does not match.
․Disconnect the machine from AC power before servicing and when not in use.
․This product is for indoor use only! Do not expose to rain or moisture. If fluid is spilled,
disconnect AC power and clean with a damp cloth. If fluid is spilled onto electronic parts,
immediately unplug the machine and contact your local Antari dealer for advice.
․No user serviceable and modifiable parts inside. Never try to repair this product, an
unauthorized technician may cause damage or malfunction to the machine.
․For adult use only. Never leave the machine running unattended.
․Never add flammable liquid of any kind to the machine.
․Make sure there are no flammable materials close to the machine while operating.
․Only use Antari fluid. Other fluid may lead to machine malfunction.
․If the machine fails to work, unplug the machine and stop operation immediately.
Contact your local Antari dealer for advice.
․Before transporting the machine, make sure the fluid tank is completely drained.
․Fog/Snow fluid may present health risks if swallowed. Do not drink fog fluid. Store it
securely. In case of eye contact or if fluid is swallowed, immediately look for medical
4
advice.
Unpacking and Inspection
Immediately upon receiving the machine, carefully unpack the carton, check the content to
ensure that all parts are present and have been received in good condition. If any parts
appear damaged or mishandled from shipping, notify the shipper immediately and retain the
packing material for inspection.
What is included: 1 x LCU-1S Liquid Control Unit
1 x Power Cord
1 x 4 Pin Data Connection Cable
1 x Fluid Tube
1 x Fluid Filter
1 x User Manual
Product Dimensions
Product Overview
95.8 mm
179 mm
202 mm
XLR 3-Pin DMX
LCD Control Panel
Control Input
Control Output
Power Inlet
Main Power Switch
Out / IN
Liquid Output
5
Setup and Installation
Compatible Models
LCU-1S is designed to use with Z-1200II, S-100X, S-200X and SW-250. Each model has a
pre-programmed fluid flow rate to reach best performance.
Fluid Connection
From control unit to machines the fluid flow through 6mm tube. The machine is equipped
with 4mm tube, use supplied 6 to 4mm adaptor to connect from end of fluid tube to machine
fluid inlet. On the input of fluid to control unit fit provided filter to the end of fluid tube prevent
obstacle entering the fluid line.
Data Connection
For data connection a 4-pin connector is used. Connect the output of control unit with input
of remote on the machine.
6
***Note: LCU-1S is designed to use with Z-1200II, S-100X, S-200X and SW-250. Can
supply to one machine at a time.
Operation
Control Panel Operation
The control unit can be operated with the onboard digital control interface.
Button
Function
[MENU]
Scroll through setting menu
▲[UP]/[TIMER]
Up/Activate Timer function
▼[DOWN]/[VOLUME]
Down/Activate Volume function
[STOP]
Deactivate Timer/Volume function
LCU-1S
Standby
7
Control Menu
Set interval from 5 to 200 seconds
Set duration from 1 to 200 seconds
Set timer output from 1 to 100%
Set output volume from 1 to 100%
Set DMX address from 1 to 512
Select remote SC-2 or Z-8
Select model to operate with S-100X, S-200X, SW-250, Z-1200II
IMPORTANT: “Null”can be used with any machine required supplying of liquid, and
possible to supply multiple machines. In this mode the fluid pump is program to run at full
capacity, which the output volume can be adjusted manually to match the supplied
machines.
Z-8 Remote Control Operation (Optional)
To operate the Z-1200II by remote control, connect the remote to the 4 pin control input
located on the rear of control unit. Z-8 remote offers manual, continous and timer operation.
For timer mode use rotarty knob on top to set interval, duration and output volume.
Interval
XXX Sec
Duration
XXX Sec
Timer
Out 100%
Volume
Out 100%
DMX512
Add:XXX
Remote
Type XXX
Model
XXXX
8
SC-2 Remote Control Operation (Optional)
Use SC-2 remote control for operation with S-100X/S-200X/SW-250. Set switch to on
position to activate, and adjust the output volume by turning the rotary knob.
DMX Connector Pin Assignment
The machine provides a 3-pin XLR connector for DMX connection. The diagram below
indicates pin assignment information.
Pin
Function
1
Ground
2
Data-
3
Data+
9
DMX Operation
Making the DMX Connection –Connect the machine to a DMX controller or to one of the
machines in the DMX chain. The machine uses a 3-pin XLR connector for DMX connection,
the connector is located on the front of the machine.
DMX Channel Function
Channel Mode
Channel
Value
Function
1
1
0-4
Off
5-255
Output volume from
1-100%
Service and Maintenance
․Do not allow the machine to become contaminated.
․Only use a damp cloth to clean the casing.
․It is recommended to run the machine on a monthly basis in order to achieve best
performance and output condition.
Fuse Replacement
Disconnect AC power before replacing fuse. Only replace fuse with same type
and rating.
Step 1: Disconnect power cord from supply.
10
Step 2: Use a flat-head screwdriver to release fuse holder.
Step 3: Replace fuse with exact same type and rating as indicated below.
Step 4: Reinsert fuse holder.
Fuse
120V = T2A 250V
230V = T1A 250V
Error Messages
Indicates the power is not switched on.
If the above message shows on the display, switch on the power of control unit or contact
your local Antari dealer for advice
Technical Specifications
Input voltage
Rated power
Fluid consumption
Compatible fluid
Ambient temp. range
Control
DMX channels
Connection
Optional accessories
Dimension
Weight
US model : AC 100-120V, 50 / 60Hz 0.35A
EU model : AC 220-240V, 50 / 60Hz 0.18A
48W
400 ml/min
Antari fluid
5 °C - 40 °C (41 °F-104 °F)
DMX512, Timer, Manual
1 channel
XLR 3-pin (DMX)
Z-8 Remote Control
SC-2 Remote Control
L203 W179 H96 mm
(L7.99 W7.05 H3.78 inch)
3.3 kg (7.28 lbs)
System
Error
Table des matières
Langues :
Manuels Unité de contrôle populaires d'autres marques
Festo
Festo Compact Performance CP-FB6-E Manuel de la liste des pièces
Elo TouchSystems
Elo TouchSystems DMS-SA19P-EXTME Manuel utilisateur
JS Automation
JS Automation MPC3034A Manuel utilisateur
JAUDT
JAUDT SW GII 6406 Series Guide rapide
Spektrum
Spektrum Air Module System Manuel utilisateur
BOC Edwards
BOC Edwards Q Series Manuel utilisateur
