Anritsu MT9810A Manuel utilisateur

The test & measurement

equipment you need at

the price you want.

Alltest carries the world’s largest selection of

used/refurbished benchtop test & measurement

equipment at 50% the price of new.

Our equipment is guaranteed working, warrantied, and

available with certified calibration from our in-house staff

of technicians and engineers.

• 10+ full time technicians with over 150 years of

specialization

• 90 day warranty & 5 day right of return on all

equipment

•

• 1-3 year warranties for new and

premium-refurbished equipment

• Every unit tested to OEM specifications

• Satisfaction guaranteed

You have plans, we will help you achieve them.

Any project. Any budget.

Get a quote today!

CCall (732) 919-3339 or email sales@alltest.net.

Alltest Instruments, Inc.

500 Central Ave.

Farmingdale, NJ 07727

P: (732) 919-3339

F: (732) 919-3332

alltest.net

sales@alltest.net

Seventh Edition

Read this manual before using the equipment.

Keep this manual with the equipment.

MT9810A

Optical Test Set

Operation Manual

ANRITSU CORPORATION

Document No.: M-W1482AE-7.0

To prevent the risk of personal injury or loss related to equipment malfunction, Anritsu Corporation uses the following

safety symbols to indicate safety-related information. Insure that you clearly understand the meanings of the

symbols BEFORE using the equipment.

Some or all of the symbols may not be used on this equipment. In addition, when drawings are included in this

manual, labels on the equipment may not be shown on them.

Safety Symbols Used in Manual

DANGER

WARNING

CAUTION

Safety Symbols Used on Equipment and/or in Manual

The following safety symbols are used inside or on the equipment near operation locations, and/or in manual to

provide information about safety items and operation precautions. Insure that you clearly understand the

meanings of the symbols and take the necessary precautions BEFORE using the equipment.

This indicates a prohibited operation. The prohibited operation is indicated

symbolically in or near the barred circle.

This indicates an obligatory safety precaution. The obligatory operation is

indicated symbolically in or near the circle.

This indicates warning or caution. The contents are indicated symbolically

in or near the triangle.

This indicates a note. The contents are described in the box.

These indicate that the marked part should be recycled.

MT9810A

Optical Test Set

Operation Manual

10 August 1998 (First Edition)

20 February 2003 (Seventh Edition)

the publisher.

The contents of this manual may be changed without prior notice.

Printed in Japan

This indicates a very dangerous procedure that could result in death or serious

injury if not performed properly.

This indicates a hazardous procedure that could result in death or serious injury

if not performed properly.

This indicates a hazardous procedure or danger that could result in light-to-severe

injury, or loss related to equipment malfunction, if proper precautions are not taken.

Safety Symbols

iii

For Safety

WARNING

1. ALWAYS refer to the operation manual when working near loca-

tions at which the alert mark shown on the left is attached. If the

operation, etc., is performed without heeding the advice in the

operation manual, there is a risk of personal injury. In addition,

the equipment performance may be reduced.

Moreover, this alert mark is sometimes used with other marks and

descriptions indicating other dangers.

2. Laser radiation warning

• NEVER look directly into the cable connector on the equip-

ment nor into the end of a cable connected to the equipment.

If laser radiation enters the eye, there is a risk of injury.

• Laser Radiation Markings on a following page show the Laser

Safety label attached to the equipment near the cable connec-

tor.

3. When supplying power to this equipment, connect the accessory

3-pin power cord to a 3-pin grounded power outlet. If a grounded

3-pin outlet is not available, before supplying power to the equip-

ment, use a conversion adapter and ground the green wire, or

connect the frame ground on the rear panel of the equipment to

ground. If power is supplied without grounding the equipment,

there is a risk of receiving a severe or fatal electric shock.

4. This equipment cannot be repaired by the user. DO NOT attempt

to open the cabinet or to disassemble internal parts. Only Anritsu-

trained service personnel or staff from your sales representative

with a knowledge of electrical fire and shock hazards should ser-

vice this equipment. There are high-voltage parts in this equip-

ment presenting a risk of severe injury or fatal electric shock to

untrained personnel. In addition, there is a risk of damage to pre-

cision parts.

5. This equipment should be used in the correct position. If the cabi-

net is turned on its side, etc., it will be unstable and may be dam-

aged if it falls over as a result of receiving a slight mechanical

shock.

Repair

WARNING

Falling Over

For Safety

CAUTION

1. Before changing the fuses, ALWAYS remove the power cord from

the poweroutlet and replace the blown fuses. ALWAYS use new

fuses of the type and rating specified on the fuse marking on the

rear panel of the cabinet.

T___A indicates a time-lag fuse.

___A or F___ A indicate a normal fusing type fuse.

There is risk of receiving a fatal electric shock if the fuses are

replaced with the power cord connected.

2. Keep the power supply and cooling fan free of dust.

•Clean the power inlet regularly. If dust accumulates around

the power pins, there is a risk of fire.

•Keep the cooling fan clean so that the ventilation holes are not

obstructed. If the ventilation is obstructed, the cabinet may

overheat and catch fire.

Changing Fuse

CAUTION

Cleaning

For Safety

WARNING

This equipment uses parts radiating Class 2 or Class 3 laser radia-

tion. The warning labels shown on the next page are attached near

the laser-radiation locations.

The product name and the danger classification specified by JIS,

IEC825 and 21CFR1040.10 are explained below.

Type JIS, IEC825 21 CFR 1040

MU952501A Class 3A Class III b

MU952502A Class 3A Class III b

MU952503A Class 3A Class III b

MU952504A Class 3A Class III b

MU952505A Class 3A Class III b

MU951301A Class 3A Class III b

MU951501A Class 3A Class III b

MU951001A Class 3A Class III b

MU952601A Class 3A Class III b

MU952602A Class 3A Class III b

MU952603A Class 3A Class III b

MU952604A Class 3A Class III b

MU952605A Class 3A Class III b

MU952606A Class 3A Class III b

Class 1, Class 2 and Class 3 indicates the degree of danger of the

laser radiation outlined below as defined by JIS, IEC825 and

21CFR1040.10.

Class 1 Safe laser presenting no danger when used according to

design specifications.

Class 2 Laser radiating in 400 to 700 nm wavelength range. In

principal, this class of laser is not safe, but the danger to

the eyes is eliminated by the eye avoidance reaction in-

cluding the blink response.

Class 3A Laser radiating in 400 to 700 nm wavelength range. The

danger to the eyes is eliminated by the eye avoidance

reaction including the blink response. For lasers radiat-

ing at other wavelengths, the degree of danger to the na-

ked eyes is not greater than Class 1.

Class 3B The eyes will be damaged if direct laser radiation enters

the eyes. Normally there is no danger if the diffused

beam is observed.

Laser Radiation Markings

For Safety

Laser Radiation Markings

;

;;

INVISIBLE LASER RADIATION

CLASS 3A LASER PRODUCT

DO NOT STARE INTO BEAM OR VIEW

DIRECTLY WITH OPTICAL INSTRUMENTS

(MAX) (PULSE DURATION) (WAVELENGTH)

AVOID EXPOSURE

INVISIBLE LASER RADIATION

EMITTED FROM THIS APERTURE

INDENTIFICATION LABEL

ANRITSU CORP.

10-27 MINAMIAZABU 5-CHOME

MINATO-KU, TOKYO, 106, JAPAN

MANUFACTURED AT:ANRITSU CORP.

ATSUGI PLANT. 19

CERTIFICATION LABEL

THIS PRODUCT CONFORMS TO

ALL APPLICABLE STANDARDS

UNDER 21 CFR 1040.10

<21 CFR 1040>

vii

For Safety

CAUTION

This equipment uses a lithium battery to back-up the memory. This

battery must be replaced by a service engineer when it has reached

the end of its useful life; contact the Anritsu sales section or your near-

est representative.

Note: The battery used in this equipment has a maximum useful life of

7 years. If should be changed before this period has elapsed.

Changing memory

back-up battery

viii

Equipment Certificate

Anritsu Corporation certifies that this equipment was tested before shipment us-

ing calibrated measuring instruments with direct traceability to public testing or-

ganizations recognized by national research laboratories including the

Electrotechnical Laboratory, the National Research Laboratory of Metrology and

the Communications Research Laboratory, and was found to meet the published

specifications.

Anritsu Warranty

Anritsu Corporation will repair this equipment free-of-charge if a malfunction

occurs within 1 year after shipment due to a manufacturing fault, provided that

this warranty is rendered void under any or all of the following conditions.

• The fault is outside the scope of the warranty conditions described in the op-

eration manual.

• The fault is due to mishandling, misuse, or unauthorized modification or repair

of the equipment by the customer.

• The fault is due to severe usage clearly exceeding normal usage.

• The fault is due to improper or insufficient maintenance by the customer.

• The fault is due to natural disaster including fire, flooding, earthquake, etc.

• The fault is due to use of non-specified peripheral equipment, peripheral parts,

consumables, etc.

• The fault is due to use of a non-specified power supply or in a non-specified

installation location.

In addition, this warranty is valid only for the original equipment purchaser. It is

not transferable if the equipment is resold.

Anritsu Corporation will not accept liability for equipment faults due to unfore-

seen and unusual circumstances, nor for faults due to mishandling by the cus-

tomer.

Anritsu Corporation Contact

If this equipment develops a fault, contact Anritsu Corporation or its representa-

tives at the address in this manual.

CE Marking

Anritsu affixes the CE Conformity Marking on the following product (s) in accor-

dance with the Council Directive 93/68/EEC to indicate that they conform with

the EMC directive of the European Union (EU).

CE Conformity Marking

1. Product Name/Model Name

Product Name: Optical Test Set

Model Name: MT9810A, MU93131×A, MU93142×A, MU95130×A,

MU95150×A, MU95100×A, MU95250×A, and MU95260×A

2. Applied Directive

EMC: Council Directive 89/336/EEC

LVD: Council Directive 73/23/EEC

3. Applied Standards

EMC:

Emission: EN61326: 1997/A1: 1998 (Class A)

Immunity: EN61326: 1997/A1: 1998 (Annex A)

Performance Criteria*

IEC61000-4-2 (ESD) B

IEC61000-4-3 (EMF) A

IEC61000-4-4 (Burst) B

IEC61000-4-5 (Surge) B

IEC61000-4-6 (CRF) A

IEC61000-4-8 (RPFMF) A

IEC61000-4-11 (V dip/short) B

*: Performance Criteria

A: During testing normal performance within the specifica-

tion limits.

B: During testing, temporary degradation, or loss of function

or which is self-recovering.

Harmonic current emissions:

EN61000-3-2: 1995/A2: 1998 (Class A equipment)

LVD:

EN61010-1: 1993/A2:1995 (Installation Category II,

Pollution

Degree 2)

Autres manuels pour MT9810A

Table des matières

Autres manuels Anritsu Équipement de test

Anritsu

Anritsu MT8852B Manuel du propriétaire

Anritsu

Anritsu AutoCal 36581NNF Manuel utilisateur

Anritsu

Anritsu Site Master S112 Manuel utilisateur

Anritsu

Anritsu MT1000A Network Master Pro Manuel utilisateur

Anritsu

Anritsu MD8470A Manuel utilisateur

Anritsu

Anritsu MP1590B Manuel utilisateur

Anritsu

Anritsu 3659 Manuel utilisateur

Anritsu

Anritsu 691 B Series Manuel utilisateur

Anritsu

Anritsu SQA-R MP1900A Manuel de référence

Anritsu

Anritsu MT8850A Manuel utilisateur

Anritsu

Anritsu MN469xC Series Manuel utilisateur

Anritsu

Anritsu MS8608A Manuel utilisateur

Anritsu

Anritsu MG3681A Manuel utilisateur

Anritsu

Anritsu Precision AutoCal 36585 Series Manuel utilisateur

Anritsu

Anritsu 681XXC Manuel utilisateur

Anritsu

Anritsu Site Master S251B Manuel utilisateur

Anritsu

Anritsu ML8720B Manuel utilisateur

Anritsu

Anritsu MT9810A Manuel utilisateur

Anritsu

Anritsu LMR Master S412E Manuel du propriétaire

Anritsu

Anritsu MT9812B Manuel utilisateur

Anritsu

Anritsu Site Master S330A Manuel utilisateur

Anritsu

Anritsu MU150101A Manuel utilisateur

Anritsu

Anritsu MP1801A Manuel utilisateur

Anritsu

Anritsu VectorStar MN4690B Series Manuel utilisateur

Manuels Équipement de test populaires d'autres marques

SMART

SMART KANAAD SBT XTREME 3G Series Manuel utilisateur

Agilent Technologies

Agilent Technologies BERT Serial Manuel utilisateur

Agilent Technologies

Agilent Technologies N3280A Manuel utilisateur

Vernier

Vernier Go Direct Voltage Manuel utilisateur

Lifeloc

Lifeloc R.A.D.A.R. Manuel utilisateur

Fluke

Fluke T5-600 Instructions d'utilisation et d'installation

Mercury

Mercury TSL01 Manuel utilisateur

MAHA

MAHA MBT Series Manuel utilisateur

Fuji Electric

Fuji Electric P-61 Manuel utilisateur

ETC

ETC SealerAtor Manuel utilisateur

Skyfine

Skyfine ETHYWAY V2 Manuel utilisateur

Appion

Appion G5 Twin Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 8159-0112A Manuel utilisateur

BW Technologies

BW Technologies MicroDock II Manuel utilisateur

Sun Nuclear

Sun Nuclear 1027 Manuel utilisateur

Biomark

Biomark HPR LITE READER Manuel utilisateur

Hioki

Hioki 3169-20 Manuel utilisateur

Ashcroft

Ashcroft ATE-100 Manuel utilisateur