Analog Devices HPUSB Manuel utilisateur
Copyright Information
©2009 Analog Devices, Inc., ALL RIGHTS RESERVED. This document
may not be reproduced in any form without prior, express written consent
from Analog Devices, Inc.
Printed in the USA.
Notice
Analog Devices, Inc. reserves the right to make changes to or to discon-
tinue any product or service identified in this publication without notice.
Analog Devices assumes no liability for Analog Devices applications assis-
tance, customer product design, customer software performance, or
infringement of patents or services described herein. In addition, Analog
Devices shall not be held liable for special, collateral, incidental or conse-
quential damages in connection with or arising out of the furnishing,
performance, or use of this product.
Analog Devices products are not intended for use in life-support
applications, devices, or systems. Use of an Analog Devices product in
such applications without the written consent of the appropriate Analog
Devices officer is prohibited.
Users are restricted from copying, modifying, distributing, reverse
engineering and reverse assembling or reverse compiling the Analog
Devices emulator operational software (one copy may be made for
back-up purposes only).
Limited Warranty
The USB- and PCI-based emulators hardware is warranted against defects
in materials and workmanship for a period of one year from the date of
purchase from Analog Devices or from an authorized dealer.
Trademark and Service Mark Notice
The Analog Devices logo, VisualDSP++, Blackfin, TigerSHARC,
SHARC, the CROSSCORE logo, EZ-KIT Lite, and EZ-ICE are regis-
tered trademarks are registered trademarks of Analog Devices, Inc.
All other brand and product names are trademarks or service marks of
their respective owners.
Regulatory Compliance
The USB- and PCI-based emulators are designed to be used solely in a
laboratory environment. The emulator is not intended to be used in any
end products or as a portion of an end product. The emulators may cause
interference to other electronic devices operating at close proximity. The
emulators should not be used in or near any medical equipment or RF
devices.
The USB- and PCI-based emulators have been certified to comply with
the essential requirements of the European EMC directive 89/336/EEC
(inclusive 93/68/EEC) and, therefore, carries the “CE” mark.
The USB- and PCI-based emulators have been appended to Analog
Devices Development Tools Technical Construction File referenced
“DSPTOOLS1” dated December 21, 1997 and was awarded CE Certifi-
cation by an appointed European Competent Body and is on file.
The EZ-KIT Lite evaluation system contains ESD
(electrostatic discharge) sensitive devices. Electro-
static charges readily accumulate on the human
body and equipment and can discharge without
detection. Permanent damage may occur on devices
subjected to high-energy discharges. Proper ESD
precautions are recommended to avoid performance
degradation or loss of functionality. Store unused
EZ-KIT Lite boards in the protective shipping
package.
HPUSB, USB, and HPPCI Emulators User’s Guide v
CONTENTS
PREFACE
Purpose of This Manual .................................................................. ix
Intended Audience .......................................................................... ix
Manual Contents ............................................................................ ix
Technical or Customer Support ........................................................ x
GETTING STARTED
Contents of Emulator Package ....................................................... 1-2
PC Configuration ......................................................................... 1-2
Installation Tasks .......................................................................... 1-3
Installing USB-Based Emulators .............................................. 1-3
Installing PCI-Based Emulators ............................................... 1-4
Verifying Driver Installation .................................................... 1-4
Attaching the Cable to the Emulation Target ................................. 1-6
VisualDSP++ Configurator ............................................................ 1-7
JTAG Frequency Selection ............................................................. 1-8
HPPCI JTAG I/O Voltage Detection ........................................... 1-10
HPUSB/USB Legacy Mode ................................................... 1-10
HPPCI-ICE Legacy/Auto Detection Mode ............................. 1-12
CONTENTS
vi HPUSB, USB, and HPPCI Emulators User’s Guide
Legacy Mode (Factory Default Setting) .................................. 1-13
Auto Detection Mode ........................................................... 1-14
Troubleshooting and Warranty Information ................................. 1-16
HARDWARE DESCRIPTION
LEDs ........................................................................................... 2-1
HPUSB-ICE/USB-ICE LEDs ................................................. 2-1
HPPCI-ICE LEDs .................................................................. 2-2
Pod LEDs ............................................................................... 2-2
Board LEDs ............................................................................ 2-3
Designing Custom Processor Boards .............................................. 2-4
Mechanical Specifications ............................................................. 2-5
HPPCI-ICE ............................................................................ 2-5
SUPPORT
Technical Support ......................................................................... 3-1
Quality Assurance ......................................................................... 3-2
REFERENCES
INDEX
HPUSB, USB, and HPPCI Emulators User’s Guide vii
PREFACE
Thank you for purchasing an Analog Devices USB- or PCI-based JTAG
emulator. The USB-based emulator family consists of the High-Perfor-
mance USB JTAG emulator and the USB JTAG emulator. The USB- and
PCI-based emulators are used in conjunction with the VisualDSP++®
development environment to create, test, and debug advanced processor
application software on Analog Devices fixed- and floating-point
JTAG-based processors.
The HPUSB-ICE system provides state-of-the-art support for
JTAG-compliant Analog Devices processors. Key features of the
HPUSB-ICE include:
• Plug-n-Play, USB 2.0 compliant
• High-speed USB device
•Windows
®2000, Windows XP, or Windows Vista operation
• Multiple processor I/O voltage support
1.8V, 2.5V, and 3.3V compliance
5V tolerant in all ranges
• Multiprocessor support
• JTAG clock operation up to 50 MHz
viii HPUSB, USB, and HPPCI Emulators User’s Guide
The HPPCI-ICE system provides state-of-the-art support for
JTAG-compliant Analog Devices processors. Key features of the
HPPCI-ICE include:
• Plug-n-Play, PCI 2.2 compliant
• Windows 2000, Windows XP, or Windows Vista operation
• Multiple processor I/O voltage support
1.8V, 2.5V, and 3.3V compliance
5V tolerant in all ranges
• Multiprocessor support
• JTAG clock operation up to 50 MHz
The JTAG clock frequency is dependent on the delay characteris-
tics of the JTAG interface and processor on the target board.
The USB-ICE system provides state-of-the-art support for selected
processors. Key features of the USB-ICE include:
• Plug-n-Play, USB 2.0 compliant
• High-speed USB device
• Windows 2000, Windows XP, or Windows Vista operation
• Multiple processor I/O voltage support
1.8V, 2.5V, and 3.3V compliance
5V tolerant in all ranges
• Multiprocessor support
• JTAG clock operation of 10 MHz
HPUSB, USB, and HPPCI Emulators User’s Guide ix
Preface
Analog Devices carries a wide range of in-circuit emulation products.
To learn more about Analog Devices emulators, go to:
http://www.analog.com/processors/
Purpose of This Manual
The HPUSB, USB, and HPPCI Emulators User’s Guide provides directions
for installing the High-Performance USB-ICE, USB ICE, and High-Per-
formance HPPCI-ICE hardware and software on your PC. The manual
also describes how to configure and use the components of the USB- and
PCI-based emulators.
Intended Audience
This manual is intended to help the customer understand the features and
operation of the HPUSB-ICE, HPPCI-ICE, and USB-ICE so they can
begin using VisualDSP++.
Manual Contents
The manual consists of:
• Chapter 1, “Getting Started” on page 1-1
Provides software and hardware installation procedures, PC system
requirements, and basic board information.
• Chapter 2, “Hardware Description” on page 2-1
Provides information on hardware aspects of the USB-based
emulators.
• Chapter 3, “Support” on page 3-1
Provides technical support contact information.
Technical or Customer Support
x HPUSB, USB, and HPPCI Emulators User’s Guide
• Chapter 4, “References” on page 4-1
Provides information on different resources available in developing
an application based on an Analog Devices processor.
Technical or Customer Support
You can reach Analog Devices, Inc. Customer Support in the following
ways:
• Visit the Embedded Processing and DSP products Web site at
http://www.analog.com/processors/technicalSupport
• E-mail tools questions to
• E-mail processor questions to
• Phone questions to 1-800-ANALOGD
• Contact your Analog Devices, Inc. local sales office or authorized
distributor
• Send questions by mail to:
Analog Devices, Inc.
One Technology Way
P.O. Box 9106
Norwood, MA 02062-9106
USA
Ce manuel convient aux modèles suivants
5
Table des matières
Autres manuels Analog Devices Matériel informatique
Analog Devices
Analog Devices ADSP-2186 Manuel utilisateur
Analog Devices
Analog Devices AD5100 Manuel utilisateur
Analog Devices
Analog Devices ADP1046A Manuel utilisateur
Analog Devices
Analog Devices Blackfin ADSP-BF537 Guide d'application
Analog Devices
Analog Devices ADAV4622 Manuel utilisateur
Analog Devices
Analog Devices ADV7604 Manuel utilisateur
Analog Devices
Analog Devices SHARC Series Manuel utilisateur
Analog Devices
Analog Devices CN-0506 Manuel utilisateur
Analog Devices
Analog Devices ADSP-CM419F Manuel utilisateur
Analog Devices
Analog Devices MICROCONVERTER ADUC812 Manuel utilisateur
Analog Devices
Analog Devices ADSP-BF53x EZ-Extender 1 Manuel utilisateur
Analog Devices
Analog Devices EVAL-LTC7067-AZ Manuel utilisateur
Analog Devices
Analog Devices ADDS-218X-ICE-2.5V Manuel utilisateur
Analog Devices
Analog Devices Linear ADI Power LT1964 Guide de configuration rapide
Analog Devices
Analog Devices ADSP-TS101 TigerSHARC Guide d'application
Analog Devices
Analog Devices ADICUP3029 Manuel utilisateur
Analog Devices
Analog Devices LTC2949 Manuel utilisateur
Analog Devices
Analog Devices ADSP-21261 SHARC Guide d'application
Analog Devices
Analog Devices ADSP-BF53x Blackfin Manuel de service
Analog Devices
Analog Devices ADAU1961 Manuel utilisateur
Manuels Matériel informatique populaires d'autres marques
EMC2
EMC2 VNX Series Manuel du propriétaire
Panasonic
Panasonic DV0PM20105 Manuel utilisateur
Mitsubishi Electric
Mitsubishi Electric Q81BD-J61BT11 Manuel utilisateur
Gigabyte
Gigabyte B660M DS3H AX DDR4 Manuel utilisateur
Raidon
Raidon iT2300 Manuel utilisateur
National Instruments
National Instruments PXI-8186 Manuel utilisateur
