AMX ViewPoint VPT-CP Manuel utilisateur

041-004-1817

11/98

VPA-CHG Fast-Cycle Battery

Charger for VPA-BP

The VPA-CHG Fast-Cycle Battery Charger for VPA-

BP consists of a Power Supply and VPT-CP Fast-

Cycle Battery Charger. The power supply can be used

for primary power or charging the VPA-BP

ViewPoint Rechargeable Battery. The power supply

barrel connector plugs into the side of the VPT-CP

and can be used separately from the VPA-CHG to

operate the ViewPoint panel.

If the battery is inserted incorrectly (backward) in the

charger, when charging the VPA-BP, a buzzer will

sound. While the battery is charging, the red LED

will light. When the battery is fully charged, the green

LED will light. If there is not a battery in the charger,

neither of the LEDs will light.

Power supply

VPA-CP

FastCycle

battery

charger

Power

supply

connection

Red LED

indicates

chargi ng

Green LED

indicates

battery is

charged

Top View

Car Charging Adapter Cable

Caution: Never leave a ViewPoint Wireless Touch

Panel in a vehicle for extended periods of time.

Summer temperatures inside a vehicle can exceed

150°F (65.6°C) and will melt the touch panel’s

housing. Winter temperatures near or below freezing

will destroy the touch panel’s LCD.

The Car Charging Adapter Cable lets you use any

vehicle containing a battery power plug-in socket.

This allows use of the vehicle’s battery as the power

source to charge/operate your ViewPoint.

Plug handle

Fuse

The Car Charging Adapter Cable has four major

parts, as shown in the picture. The fuse is removable

and rated 2 A at 250 V (2A250V). Internal to the plug

handle, there is a small spring to provide pressure

against the fuse when all parts are assembled.

All other trademarks contained in this document are

the property of their respective owners.

AMX reserves the right to alter specifications without

notice at any time.

AMX Corporation, 11995 Forestgate Drive, Dallas, Texas USA 75243

Printed in the USA

9LHZ3RLQW#7RXFK#3DQHO#&OHDQLQJ/

&KDUJLQJ/#DQG#%DWWHU\#5HSODFHPHQW

&RQWURO#3DQHO#$FFHVVRULHV

4XLFN#5HIHUHQFH

Quick Reference Guide

OVERVIEW

The VPT-CP ViewPoint Color Wireless Touch Panel

and VPT-GS ViewPoint Grayscale Wireless Touch

Panel are hand-held, liquid crystal display (LCD),

touch panels that allow you to control devices

remotely.

FEATURES

The features of the ViewPoint Touch Panels are:

• VPT-CP 6-inch (diagonal), 320 x 240

pixel, 256 color LCD screen

VPT-GS 6-inch (diagonal), 320 x 240

pixel, 16-shade grayscale LCD screen

• Four external programmable buttons

• Programmable firmware via on-board serial

port

• One-way radio frequency (RF) or infrared

(IR) transmission

• On-board battery-charging circuitry

• Hand-held or desktop usage

• Battery life exceeding 6 continuous hours of

operation, or up to 2 weeks typical operation

CONNECTIONS

The ViewPoint uses two connectors. The power jack

is for connecting an external power supply (furnished)

for ViewPoint operation/charging. The programming

jack is a 3-wire, 2.5 mm stereo jack. The ViewPoint

comes with the required cable and power supply.

Power jack

Programming jack

Cable FG-10-817 to cable FG10-727

to your PC’s RS-232 port

ViewPoint to PC

programming cable

Stereo plug, male

CLEANING THE TOUCH

OVERLAY

You should clean the touch screen overlay after each

day’s use.

1. Obtain two clean cotton cloths and a spray bottle

of cleaning solution consisting of 50% isopropyl

alcohol and 50% water.

2. Spray a small amount of the cleaning solution

onto one of the cloths.

3. Clean the touch panel overlay with the damp

cloth.

4. Wipe the touch panel overlay with the dry cloth.

RECHARGEABLE BATTERY

The ViewPoint uses a VPA-BP ViewPoint

Rechargeable Battery. The illustration shows the

VPA-BP and placement in the ViewPoint.

VPA-BP Battery

Battery sash

Ce manuel convient aux modèles suivants

Autres manuels AMX Écran tactile

AMX

AMX AXT-CP4 Guide de démarrage rapide

AMX

AMX Modero ViewPoint MVP-7500 Manuel utilisateur

AMX

AMX Modero NXD-1700VG Manuel utilisateur

AMX

AMX Modero ViewPoint MVP-7500 Manuel de la liste des pièces

AMX

AMX MXT-701 Manuel de la liste des pièces

AMX

AMX AXD-EL Plus Mode d’emploi

AMX

AMX Modero NXD-500i Manuel de la liste des pièces

AMX

AMX MST-431 Manuel utilisateur

AMX

AMX Modero Viewpoint MVP-5200i Manuel utilisateur

AMX

AMX Modero X Series Manuel utilisateur

AMX

AMX Modero ViewPoint MVP-5100 Manuel utilisateur

AMX

AMX CB-TP15 Manuel utilisateur

AMX

AMX MST-431 Manuel utilisateur

AMX

AMX Modero NXD-1500VG Instructions d'utilisation

AMX

AMX AXD-CV6 Manuel utilisateur

AMX

AMX MXT-701 Manuel utilisateur

AMX

AMX AXW-MLC Mode d’emploi

AMX

AMX AXU-CP Mode d’emploi

AMX

AMX LCD Mini-Touch Panels Manuel utilisateur

AMX

AMX AXR-NWS Manuel utilisateur

AMX

AMX AXP-SPPlus Mode d’emploi

AMX

AMX Modero NXD-1200V Manuel utilisateur

AMX

AMX Modero NXD-1700VG Manuel utilisateur

AMX

AMX Modero NXD-700Vi Manuel de la liste des pièces

Manuels Écran tactile populaires d'autres marques

FlowLine

FlowLine Data loop Manuel utilisateur

ALPEX

ALPEX AEx-8 P Series Manuel utilisateur

Ltech

Ltech E5S Manuel utilisateur

Harman

Harman AMX MODERO S MSD-701-L2 Manuel utilisateur

Acnodes

Acnodes PC 1150 Manuel utilisateur

AIS

AIS IP10IA99 series Manuel utilisateur

IBASE Technology

IBASE Technology ASTUT-152-RE1S Manuel utilisateur

YASKAWA

YASKAWA TP 610C Manuel utilisateur

B&R

B&R Power Panel C Series Manuel utilisateur

Beijer Electronics

Beijer Electronics X2 control Manuel utilisateur

AXIOMTEK

AXIOMTEK GOT321W-521 Manuel utilisateur

TRIDONIC.ATCO

TRIDONIC.ATCO x-touchBOX Manuel utilisateur

Qomo

Qomo QIT1386 Manuel utilisateur

DFI

DFI KS104-CD Manuel utilisateur

Sartorius

Sartorius X3 PR 5410 Manuel utilisateur

Advantech

Advantech TPC-30 Series Manuel utilisateur

B&R Industries

B&R Industries MAPPC900-ENG Manuel utilisateur

FEC

FEC PP-9635 Manuel utilisateur