Amprobe TMA40-A Manuel utilisateur

TMA40-A

Airﬂow Anemometer

Users Manual

For detailed specifications and ordering info go to www.TestEquipmentDepot.com

English

TMA40-A

Airﬂow Anemometer

Users Manual

TMA40-A_Rev002

Limited Warranty and Limitation of Liability

Your Amprobe product will be free from defects in material and workmanship for 1 year from the

date of purchase. This warranty does not cover fuses, disposable batteries or damage from accident,

neglect, misuse, alteration, contamination, or abnormal conditions of operation or handling.

Resellers are not authorized to extend any other warranty on Amprobe’s behalf. To obtain service

during the warranty period, return the product with proof of purchase to an authorized Amprobe

Test Tools Service Center or to an Amprobe dealer or distributor. See Repair Section for details.

THIS WARRANTY IS YOUR ONLY REMEDY. ALL OTHER WARRANTIES - WHETHER EXPRESS, IMPLIED

OR STAUTORY - INCLUDING IMPLIED WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR

MERCHANTABILITY, ARE HEREBY DISCLAIMED. MANUFACTURER SHALL NOT BE LIABLE FOR ANY

SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OR LOSSES, ARISING FROM ANY

CAUSE OR THEORY. Since some states or countries do not allow the exclusion or limitation of an

implied warranty or of incidental or consequential damages, this limitation of liability may not apply

to you.

Repair

All test tools returned for warranty or non-warranty repair or for calibration should be accompanied

by the following: your name, company’s name, address, telephone number, and proof of purchase.

Additionally, please include a brief description of the problem or the service requested and include

the test leads with the meter. Non-warranty repair or replacement charges should be remitted in the

form of a check, a money order, credit card with expiration date, or a purchase order made payable

to Amprobe® Test Tools.

In-Warranty Repairs and Replacement – All Countries

Please read the warranty statement and check your battery before requesting repair. During the

warranty period any defective test tool can be returned to your Amprobe® Test Tools distributor for

an exchange for the same or like product.

Non-Warranty Repairs and Replacement – US and Canada

Non-warranty repairs in the United States and Canada should be sent to a Amprobe® Test Tools

Service Center. Call Amprobe® Test Tools or inquire at your point of purchase for current repair and

replacement rates.

➊Fan probe with built-in temperature and

humidity sensors

➋Tripod mounting screw

➌LCD display

➍DC adaptor jack

➎USB port

➏Function Keys

F1: Press for measurement mode

F2: Press to access the memory

F3: Press to access the log ﬁles

F4: Press to enable/disable auto

power off, set data and time, and set

parameters to record.

➐Keypad

1SYM stands for ”1,*,.,:,$,+,-,=”

2ABC stands for ”2,a,b,c,A,B,C”

3DEF stands for”3,d,e,f,D,E,F”

4GHI stands for”4,g,h,i,G,H,I”

5JKL stands for”5,j,k,l,J,K,L”

6MNO stands for”6,m,n,o,M,N,O”

7PQRS stands for”7,p,q,r,s,P,Q,R,S”

8TUV stands for”8,t,u,v,T,U,V”

9WXYZ stands for”9,w,x,y,z,W,X,Y,Z”

0 |__| stands for”0 and space”

: Press to turn on and off the backlight

: Press to shift the cursor to previous

: Press to shift the cursor to next

ON/OFF: Press to turn the unit on and

off

F1 F2 F3 F4

1 SYM. 2 ABC DEF 3

4 GHI 5 JKL MNO 6

7 PQRS 8 TUV WXYZ 9

ON/OFF

MEAS: Normal (Single)

measurement

MEM : Manual record(99 points)

measurement

LOG : Automatic record (Logger)

measurement

SET : Logger, Unit, real time,

other setting

TMA40-A

Airﬂow Anemometer

CONTENTS

Introduction.........................................................................................................................................5

Unpacking and inspection .................................................................................................................5

Operation ............................................................................................................................................5

Meter setting: SET (See Fig.2) .......................................................................................................5

Meter Screen Description (See Figs 2&3)......................................................................................5

Single Measurement: MEAS (See Fig. 3).......................................................................................6

Multiple Measurement: MEM (See Fig. 4)....................................................................................6

Automatic Logging: LOG (See Fig. 5) ...........................................................................................6

Comparison Table................................................................................................................................7

Technical Speciﬁcations ....................................................................................................................8

Software Operation ............................................................................................................................8

Troubleshooting..................................................................................................................................9

INTRODUCTION

This meter is designed with three measurement modes:

Single point measurement

Multiple points measurement (Manual record)2.

Automatic Logging3.

Measuring/programming anywhere at any time•

User friendly interface•

USB cable and software enable to link with PC for downloading and uploading•

Backlight function•

Tripod mountable for long time use•

Power off time selectable•

Big Dot matrix LCD•

Inner:2.1mm; Center positive) 0.05mA minimum

UNPACKING AND INSPECTION

Your shipping carton should include:

1 x TMA40-A Airﬂow Anemometer

4 x AAA Battery

1 x USB Cable

1 x CD Download Suite

1 x Carrying case

OPERATION

Meter setting: SET (See Fig.2)

Press F4 to enter the meter setting•

Press• or key to shift the cursor

Press EDIT to enter modiﬁcation mode•

Press NEXT/BACK to enter the next or previous page.•

Press EXIT to return to main menu.•

Meter Screen Description (See Figs 2&3)

LCD Cont.(1-5): LCD brightness. From darkest 1 to brightest 5.1.

Auto Off: Selectable 1 to 20 minutes.2.

Set clock: Choose date and time. Press EDIT to enter the month. Press NEXT to accept or3.

ABORT to cancel. Repeat for day, year, hour, minute and second.

Set ID: Press EDIT to enable or disable ID.4.

ID: Press EDIT to enter the user id. Use the keypad to enter the information.5.

Note: To calculate air volume, ﬁrst enter the value of the air source area. Three choices are

available: length X width (rectangle); Diameter(Circle); and Area.

Range from 0~300cm (Rectangle and Circle and 0~90000sq.cm for area.

Single Measurement: MEAS (See Fig. 3)

Press F1 to enter the single measurement mode.•

Press F2 to select the type of input•

Press ESC to return to previous menu•

Multiple Measurement: MEM (See Fig. 4)

In this mode, you can manually record what you measure in real time and attach a ﬁle name

with the recording. There is a total of 99 memory locations in this mode.

Press F2 to enter the multiple measurement mode.•

Press F2(MEAS) to start a measurement.•

Press ABORT(F1) to cancel the measurement .•

Press SAVE(F4) to save the recording.•

Press F3(EDIT) to edit the ﬁle name of the recorded value. Use the keys to enter the name.•

Press and hold to move from one character to another. Release the key to select the desired

character.

Press CLR(F2) to delete a selected character.•

Press and hold CLR(F2) for over 2 seconds to delete the whole memory.•

Automatic Logging: LOG (See Fig. 5)

In this mode, you can automatically record what you have set up before a real time

measurement.

Press F3(LOG) to enter the LOG mode.•

Press SET(F3) to set up the parameters for the recording.•

Press• keys to select a parameter.

Press EDIT to modify begin date, start time, End date, suspend time, and the rate ( 1 to 200•

seconds).

Expect is 2400 points(total memory) and remain (remaining memory) will be calculated•

according to your setting.

Press NEXT•

Press START to begin the logging session•

Press VIEW to see the recording data•

Press MEAS to see the real time data measurement.•

Press ESC to return to previous screen.•

Press STOP to suspend the logging session.•

Press NEXT•

Press P-PG(previous page) or N-PG (next page) to see the previous or the next 100 points.•

Press BACK•

Press EXIT to return to the main screen•

COMPARISON TABLE

Measurement Description Memory Point

Single point Single point measurement No Memory

Multi-Point File name editable

Multi-point measurement 99 points

Automatic Logging Programmable

Data logging function 2400 points

Multi-point measurement Data Logging

Record 99 points 2400 points

File Name Editable or Default with date

and time (Note 1) Default (Note 2)

Measuring/Sampling Press MEAS Key to measure

and store

Automatically measure and

store according to preset

parameters (Note 3)

Note 1: The recording ﬁle name will show current date and time as ﬁle name if the user doesn’t

edit any.

Example: ”05-06 09:21:51” means the recording was made on May 6th at 09:21:51 or June 5th

at 09:21:51 depending on your date mode setting.

Note 2: Each recording ﬁle will take the current date and time as ﬁle name.

Note 3: The meter will start and stop recording at the preset dates and times. If the preset time

is less than 24-hour and the end date is in the future, the meter will stop at the ending time

and restart again the next day until the ending date or until the memory is full.

a) Set the date and start time

b) Set the date and stop time

c) Set the sample rate

d) In order to record 24-hour a day, you must set START for 00:00:00 and SUSPEND for

23:59:59

TECHNICAL SPECIFICATIONS

Temperature resolution 0.1°C (0.1°F)

Temperature response 30 seconds

Relative Humidity range 0 to 100%

RH accuracy ± 3% at 10% to 99%; ± 5% at all others

RH resolution 0.1%

RH response time 15 seconds

Wet Bulb range -22 to 70°C (-7.6°F to 158°F)

Wet Bulb resolution 0.1

Air Velocity range 0.4 to 32 m/s ( 1.3 to 105 ft/s)

Air Velocity accuracy ± 3%

Air Velocity Resolution 0.1 m/s (0.1 ft/s)

Air Velocity response time 1 second

Air Volume range 0 to 99999 (CFM or CMM)

Air Volume accuracy ± 3%

Air Volume resolution 0.1

Measurement with memory 99 points

Datalogging measurement 2400 points

Dimensions 165 X 70 X 53 mm ( 6.5 X 2.57 X 2.1 in)

SOFTWARE OPERATION

-Insert the software CD into CD-ROM driver

-Install the USB driver ﬁrst

-Install the software follow the on-screen instructions

-Open the program

-Click the “Port” from main screen and input the right comm. port.

-Click as follow to download the memory

Click to download manually recorded data.

Click to download automatically recorded data2.

Click to download both manually & automatically recorded data3.

TROUBLESHOOTING

Power on but no display

Make sure the time of pressing ”ON/OFF” key is more than 0.2 seconds.•

Check the batteries are in place and make sure they are at good contact and correct polarity.•

Replace the batteries and try again .•

Display disappear

Check whether the low battery indicator is displayed on or before display disappears. If yes,•

replace the batteries .

Error code:

E2. Problem : Meter value is underﬂow .•

E3. Problem : Meter value is overﬂow.•

E4. Problem: Calculated source value occurs error.•

Autres manuels pour TMA40-A

Table des matières

Autres manuels Amprobe Instrument de mesure

Amprobe

Amprobe SOLAR-100 Manuel utilisateur

Amprobe

Amprobe AC40C Manuel utilisateur

Amprobe

Amprobe ACF3000 AK Manuel utilisateur

Amprobe

Amprobe AT-6000-R Manuel utilisateur

Amprobe

Amprobe ACD-10 PRO Manuel utilisateur

Amprobe

Amprobe AM-530 Manuel utilisateur

Amprobe

Amprobe SM-10 Manuel utilisateur

Amprobe

Amprobe TMD-10 Manuel utilisateur

Amprobe

Amprobe LH41 Manuel utilisateur

Amprobe

Amprobe AC50A Manuel utilisateur

Amprobe

Amprobe SOLAR-500 Manuel utilisateur

Amprobe

Amprobe VPC-20 Manuel utilisateur

Amprobe

Amprobe CM100 Manuel utilisateur

Amprobe

Amprobe TH-1 Manuel utilisateur

Amprobe

Amprobe CT-326-C Manuel utilisateur

Amprobe

Amprobe LH41A Manuel utilisateur

Amprobe

Amprobe AM91RS Manuel utilisateur

Amprobe

Amprobe LM-200LED Manuel utilisateur

Amprobe

Amprobe BT-AFT1 Manuel utilisateur

Amprobe

Amprobe ACD-23SW Manuel utilisateur

Amprobe

Amprobe LM631A Manuel utilisateur

Amprobe

Amprobe THWD-3 Manuel utilisateur

Amprobe

Amprobe CO2-100 Manuel utilisateur

Amprobe

Amprobe DM-5 Manuel utilisateur

Manuels Instrument de mesure populaires d'autres marques

Suaoki

Suaoki D40 Manuel utilisateur

Elster

Elster BK-G1.6 Manuel utilisateur

Endress+Hauser

Endress+Hauser Deltabar FMD71 Manuel

Duratool

Duratool D03128 Manuel utilisateur

Vega

Vega VEGAPULS 65 Manuel utilisateur

Tonghui

Tonghui TH2618B Manuel utilisateur

Tenmars

Tenmars TM-801 Manuel utilisateur

MSR

MSR 145 Manuel utilisateur

TPS

TPS WP-82 Manuel utilisateur

ELMETRON

ELMETRON CP-511 Manuel utilisateur

PCB Piezotronics

PCB Piezotronics 003C30 Manuel utilisateur

Tenma

Tenma 72-10465 Manuel utilisateur

Endress+Hauser

Endress+Hauser Proline Promag 50 Caractéristiques techniques

Siemens

Siemens SITRANS F Coriolis FCT030 Manuel de la liste des pièces

KLINGER

KLINGER CMF V Series Manuel utilisateur

EXFO

EXFO FTB-2 Manuel d'exploitation et d'entretien

Keysight

Keysight M8290A Manuel utilisateur

ADTEK

ADTEK MW-5 Manuel utilisateur