AMP 8200 Manuel utilisateur
8 Series
Quick Reference Guide
v 1.0
PQR-8200-1.0-E
Note: This information is CONFIDENTIAL and must be used exclusively for the operation of
Advanced Mobile Payment Inc.™ (AMP) products. It may not be duplicated, published, or
disclosed without prior written permission.
Advanced Mobile Payment Inc.
Advanced Mobile Payment Inc. www.amobilepayment.com
8 Series Quick Reference Guide
PROPRIETARY NOTICE
© 2017 AMP Inc. All Rights Reserved
All pages of this document contain information proprietary to
Advanced Mobile Payment Inc (AMP). This document shall not be
duplicated, transmitted, used, or otherwise disclosed to anyone
other than the organization or specific individuals to which this
document is delivered, and then only for the purpose of evaluation
of the AMP proposal. This restriction is applicable to all sheets of
this document. AMP reserves the right to have the recipient return
all copies of this document at any time.
Advanced Mobile Payment Inc. www.amobilepayment.com
8 Series Quick Reference Guide
ID
Title
Category
Access Level
PQR-8200-1.0-E
8 Series Quick Reference Guide
AMP POS 8 Series - 8200
General
Version Date Summary of Change Updated by
1.0 Dec 2017 Initial version R. Gibbs
Version Software Release Supported Hardware Model
1.0+ 1.0 AMP POS 8 Series - 8200
DOCUMENT PROPERTIES
Information
Version Control
Supported Hardware & Software
Advanced Mobile Payment Inc. www.amobilepayment.com
8 Series Quick Reference Guide
CONTENTS
1 Introduction
2 8 Series - 8200 Architecture
2.1 Front View
2.2 Back & Side View
3 General Precautions
4 Installing Terminal Battery
5 Installing SIM/SAM Card
6 Powering Device On/Off
7 Installing Printer Paper
8 Troubleshooting Common Problems
9 Technical Specifications
4
4
4
5
6
7
7
9
9
10
11
The following items should be found inside the original packaging:
8 Series POS terminal
AC power supply and plug
Micro USB cable
Li-Ion battery
Thermal paper roll
Product Quick Reference Guide
Advanced Mobile Payment Inc. www.amobilepayment.com
8 Series Quick Reference Guide
1
2
3
4
5
6
7
Printer paper roll door
Printer door release
Charging indicator light
Touchscreen LCD
EMV chip insert slot
NFC contactless reader
On / Off button
LED indicators
Camera indicator light
8
9
10
11
12
Front-facing camera
Volume buttons
Magstripe reader
1 Introduction
2 8 Series - 8200 Architecture
2.1 Front View
2
4
3
5
6
7
8
9
11
10
12
1
Maximize your point of sale capabilities by combining easy payment acceptance with
customer desired features such as QR code scanning and value-added applications. With
functions designed to improve the transaction flow for merchants like the charging base,
expandable ports, handsfree scanning and simple touch interface, the AMP 8 Series
delivers the latest technology without sacrificng the connectivity and security of a traditional
POS. Running on a powerful Android-based OS, the 8 Series is easy to use and open to
customization, providing a platform to integrate payment with external applications.
Advanced Mobile Payment Inc. www.amobilepayment.com
8 Series Quick Reference Guide
1
2
3
4
5
6
Camera and 1D/2D scanner
Built-in speaker
Battery compartment cover
Identification label
Anti-slip rubber pads
Charging contacts for base
1
2Micro USB port
Headphone jack
2
3
4
5
1
7
12
2.2 Back & Side View
Advanced Mobile Payment Inc. www.amobilepayment.com
8 Series Quick Reference Guide
Basic care and consideration should be used when handling, operating or installing the 8
Series terminal. This is a secure device, with both physical and logical tamper protection,
and no attempt should be made by the user to open or service the device in any way other
than approved troubleshooting methods. Keep these basic guidelines in mind to prolong the
longevity and functionality of your product:
3 General Precautions
Use only the dedicated power supply and battery provided with the terminal to avoid
damage to the device’s electrical components
Avoid spills or exposure to liquid, which could cause the terminal to short circuit
Protect the terminal from impact, including: vibration, shaking, knocks, falling objects,
being dropped, etc.
Keep the terminal from environments that produce excessive dust, humidity, high or
low temperatures, or electromagnetic fields
While charging, do not attach or remove any components to avoid damage to the
internal circuitry
There are no user-serviceable internal parts or mechanisms, do not try to open, modify
or repair the device
This terminal contains a failsafe where all internal data will be erased immediately
upon detection of tampering (such as opening the housing)
If a fault occurs, immediately disconnect power supply, discontinue use and contact
your service provider to request repairs and diagnostics
When the battery reaches the end of its service life, it cannot be thrown in the garbage,
instead it should be safely disposed of according to local hazardous disposal laws
Advanced Mobile Payment Inc. www.amobilepayment.com
8 Series Quick Reference Guide
4 Installing Terminal Battery
5 Installing SIM/SAM Card
Installing the battery
Open the rear battery cover using the bottom tab to expose the battery compartment
Connect the cable on the battery to the open connection port on the right side of the
compartment, and securely insert the battery with the label tag facing upwards
After installation, close the rear battery cover
Installing SIM/SAM cards
Open the rear battery cover using the bottom tab and remove the battery
NOTE
When removing the battery, support its weight and gently unplug the connector to
avoid damage to the wires or connections
Open rear battery cover Install the battery
Advanced Mobile Payment Inc. www.amobilepayment.com 8
8 Series Quick Reference Guide
SAM
SIM SD
With the exposed chip facing downward, and the angled corner oriented away from the
slot, insert the card until it is seated right at the bottom of the slot
After installing the card, connect the battery and close the rear battery cover
NOTE
Ensure the terminal is powered off completely when attempting to install or uninstall a
SIM/SAM card to avoid damaging the card or terminal
Do not affix any labels or stickers to the SIM/SAM card, as they may cause the card to
damage the receiver or become jammed inside of the device
Install the SIM, SAM, or SD card
Advanced Mobile Payment Inc. www.amobilepayment.com 9
8 Series Quick Reference Guide
6 Powering Device On/Off
NOTE
When installing paper, ensure thermal media side is facing print head
Do not leave the printer without paper for extended periods of time, to prevent the
rubber roller from sticking to the plate
The heating plate operates at a high temperature, do not touch until it has fully cooled
The manual paper cutter edge is sharp, keep clear to avoid injury
7 Installing Printer Paper
Open the printer paper door Insert the printer paper
Installation of thermal receipt printer paper
Pull up on the plastic release handle to pop open the paper holder lid
Insert the thermal paper roll into the paper holder, ensuring the orientation and spool
direction matches the below diagram
After installation, ensure the paper holder lid is closed and securely in place
Powering Off the device
While the terminal is on, press and hold the power key for at least two (2) seconds, and
select “Shutdown” from the on-screen prompt, or hold the power key for eight (8) seconds
to perform a forced shutdown.
Powering On the device
First ensure that the battery is adequately charged, then press and hold the power key for at
least six (6) seconds to turn the terminal on.
Table des matières
Autres manuels AMP Terminal tactile
Manuels Terminal tactile populaires d'autres marques
Wincor Nixdorf
Wincor Nixdorf iPOS plus Advanced Manuel utilisateur
Ingenico
Ingenico AXIUM EX4000 Manuel utilisateur
Heisei Electronics
Heisei Electronics Q-POS 815 Manuel utilisateur
Amano
Amano MTX-15 Manuel utilisateur
FLOWBIRD
FLOWBIRD CWT Compact Touch Manuel utilisateur
Demco
Demco SP7 Manuel utilisateur
