AMC XO Guide de l'utilisateur

POWER

H.O.M.E. AUTOMATION SERIES

XODigital Home system

AMC XO

8 ZONE 8 SOURCE DIGITAL H.O.M.E. SYSTEM

with Remote Local Sources

Instant Installing All Zone Connectors

APPLICATION AND FEATURE LIST

Features of the AMC model XO

* System for total 8 Zones

* System with 8 Sources 4 Global Sources & 4 Remote Local Sources

* Only RJ45 & Speaker Wires used for installations between zones

* Two ways Digital Data Communication System between XO main unit and keypads

in all zones

* Designed with cascade feature for keypad XK1

* Two All Zone Connectors for making installing XO like 123 in seconds

* Volume Control & Tone Control for each Zone

* four 38KHz and four 56KHz IR outputs

* Doorbell and telephone mute system (PDM1)

* With RS232 to digital link with other systems including lighting controls like Lutron

system with RS232 interface

* IR remote control receiver on each zone for controlling XO main unit and Local

Sources in other zones

* RCA, 3.5mm mini jack and RJ45 Remote Local Source input jacks in each Zone

* Low profile 1U

* Power of each channel / zone : 15W x 2 Digital Amplifiers for each Zone

* The XO package contents:

1 XO Eight-Source (4 local & 4 Remote), Eight-Zone Digital Home System

main unit

1 ZT8 8 Zone Terminal

2 SCSI 50 wires cable

4 IRE1 IR emitters with feedback LED

1 Remote Control Handset

* Options : XK1, XS1, XU1, PDM1 (numbers of XK1, XS1, XU1, PDM1 required based

on each installation designs)

Digital Home System AC115V/

60Hz

120W

FUSE: T2AL 250V

1234

SOURCE

1133

2244

IR OUT IR OUT

-38KHz -56KHz

MUTE

LINK

STATUS +12VDC PRE-OUT VC/NVC

ZONE 5 ZONE 6 ZONE 7 ZONE 8

RS232

ALL ZONE CONNECTOR

VC VC VC VC

NVC NVC NVC NVC

Doorbells1&2

RearFront

Tel Lines1&2

POWER

H.O.M.E. AUTOMATION SERIES

XODigital Home system

1 2

1. Source Inputs 1~4

2. IR Out - 38KHz

3. IR Out - 56KHz

4. Mute

5. Link

6. Status

7. 12VDC

8. PRE-OUT VC/NVC (Zone 5~8)

9. All Zone Connector-1

10. All Zone Connector-2

11. AC input receptacle with Fuse

12. RS232

123456 7 8 91011

Zone 1

Zone 2

Zone 3

Zone 4

Zone 5

Zone 6

Zone 7

Zone 8

8 Zones

AMC PDM1

(Phone-Doorbell-Mute Module)

ZT8

REAR PANEL CONNECTIONS/FRONT PANEL CONTROLS

FRONT PANEL

1. Power Switch (Standby / Off) &

Blue LED

2. Zone LED & 8 square Recesses

REAR PANEL CONNECTIONS

1. Source Inputs 1~4

2. IR Out - 38KHz

3. IR Out - 56KHz

4. Mute

5. Link

6. Status

7. 12VDC

8. PRE-OUT VC/NVC (Zone 5~8)

9. All Zone Connector-1

10. All Zone Connector-2

11. AC input receptacle with Fuse

12. RS232

Each of these stereo RCA inputs

receives an audio signal from up to

four independent audio sources.

Remarks: There are other 4 local

sources from Zone 1~4 as Remote

Source Inputs R5 to R8 can be

selected by all zones.

for most Audio Sources

for cable and satellite boxes

This 3.5mm non-shorting Stereo

connector (Power, Mute, Gnd) is

designed to be used in conjunction

with the AMC PDM1 (Phone-

Doorbell-Mute Module)

This 3.5mm mono connection is

used to expand the AMC XO from

eight to sixteen zones.

This 3.5mm mono connection

provides a constant +12VDC output

when a zone is turned on. This can be

used to trigger external equipment.

for supplying 12VDC to external

modules. (total 1A max)

These 4 switched are for setting Zone

5~8 PRE-OUTS to be with VC (Volume

Control) or NVC (No Volume Control)

This is SCSI Connector for Speaker-

Zone 1~4 and PRE-OUTS-Zone 5~8

(Balanced)

This is SCSI Connector for IR in/out

Data, Status, R5 to R8 Remote

Sources Signals(From Z1~Z4), +12V

and Ground.

This is used for making interface with

other system and for factory purposes.

FRONT PANEL CONTROLS

1. Power Switch (Standby / Off) & Blue LED

2.ZoneLED&8squareRecesses

The Power Switch turns AMC XO "Standby" or "Off"

The Blue LED will be lit up during "Standby", will be turned off during "Off"

Each of these LEDs indicates, when lit, that its zone keypads are turned on.

The 8 square recesses are for putting labels of names of all zones

710

1. LED's of Volume Level of the zone

2. Volume up / down

3. IR Receiver

4. Power

5. Mute

6. Source Selection

7. JK1 (RJ45) (TO XS1) (Only for Zone

1~ Zone 4)

8. JK2 (RJ45) (TO ZT8)

9. JK3 (RJ45) (Another XK1)

10. JK4 (RJ45) (This is Pre-Out) (To

Main-in)

volume-only one LED will be light up.

Each keypad has an IR receiver for

controlling the audio source

equipment.

The power button turns that keypad's

zone on and off independently of the

other zones. Pressing and holding the

power button turns all the zones off

simultaneously.

The mute button temporarily silences

any audio playing in that keypad's

zone.

The 8 source buttons independently

select any of the four sources ( Source

1 to 4) connected to the rear panel of

AMC XO and another four Remote

Sources (Source R5 to R8) connected

to the remote sources on the four

keypads of four zones. (R5 located at

keypad of Zone 1, R6 located at

keypad of Zone 2, R7 located at

keypad of Zone 3 and R8 located at

keypad of Zone 4) The selected source

button will remain lit.

Use CAT5 cable to connect from the

JK1 of XK1 to the RJ45 connector of

XS1.

Use CAT5 cable to connect from the

JK2 of XK1 to ZT8 or JK3 of Another

XK1.

Use CAT5 cable to connect from the

JK3 of XK1 to JK2 of Another XK1.

Use CAT5 cable to connect from the

JK4 of XK1 to main-in of amplifiers or

power speakers.

KEYPAD

SCSI Connector 1

SCSI Connector 2

JK14 (RJ45)

Zone 4

SPK

Zone 3

SPK

Zone 2

SPK

Zone 1

SPK

JK1 (RJ45)

Zone 5

JK13 (RJ45)

Zone 3

JK2 (RJ45)

Zone 6

JK12 (RJ45)

Zone 2

JK3 (RJ45)

Zone 7

JK11 (RJ45)

Zone 1

JK4 (RJ45)

Zone 8

8 ZONE TERMINAL ZT8

RCA Jack Input

(L & R)

3.5mm Mini Jack

Input (L & R)

IR Output

(3.5mm Mini Jack)

RJ45

(L & R and IR Output)

RJ45 to JK1 of XK1

via CAT5 Cable

REMOTE SOURCE XS1

BALANCED TO UNBALANCED MODULE XU1

1. Power On & Off

2. Source Selection

3. Mute & Mute On & Mute Off

4. Volume

This button turns the zone on and off

and powers all the zones off when it is

pressed and held.

These 8 buttons correspond to the four

local source buttons ( source 1~4) and

four remote source buttons (source R5

~R6) on the zone keypad.

"Mute" button mutes the zone in the

same way as the keypad mute button.

"Mute On" and "Mute off" turn the mute

"On" or "Off"

Perform the same function as the

volume button on the zone keypads.

The volume level indicator on the

keypad will respond correspondingly to

the volume command from the remote

control.

5. The remote control is basically with the

same functions of keys as AMC S84

REMOTE CONTROL

Autres manuels pour XO

Table des matières

Autres manuels AMC Routeur réseau

AMC

AMC iMIX 5 Manuel utilisateur

Manuels Routeur réseau populaires d'autres marques

Allnet

Allnet ALL0333AU Manuel utilisateur

HomeSeer

HomeSeer HT-SEL Manuel utilisateur

Sercomm

Sercomm Genesis OC3505D Manuel utilisateur

Billion

Billion BIPAC 5102 Series Manuel utilisateur

TP-Link

TP-Link TD-8817 Manuel utilisateur

Motorola

Motorola MR1900 Manuel utilisateur

Digi

Digi IX14 Manuel utilisateur

Cisco

Cisco NCS 540 Manuel

XAVi

XAVi X8821e Manuel utilisateur

BEC

BEC 6200WZL Manuel utilisateur

MikroTik

MikroTik hAP ac3 Series Manuel utilisateur

Korenix

Korenix JetNet 5428G Series Manuel utilisateur

NETGEAR

NETGEAR FS526T - Switch Manuel utilisateur

Korenix

Korenix JetNet 5710G Series Manuel utilisateur

Automated Logic

Automated Logic ZN551 Manuel du propriétaire

Cisco

Cisco ASR 1000 Series Manuel de l'opérateur

EnGenius

EnGenius ESR-9710 Manuel utilisateur

Cisco

Cisco 805 Series Instructions d'utilisation et de sécurité