Amazon B019NY2PKG Instructions d'utilisation et de sécurité
Tripod Mic Stand with Boom
Pied De Micro Avec Trépied et Bras
Mikrofonständer mit Stativ und Galgen
Asta Del Microfono Con Treppiede e Braccio
Para Micrófono Con El Trípode y Brazo
Microfoonstandaard met Drie Poten en Giek
ブ ー ム 付 き 三 脚 マイクスタンド
B019NY2PKG
日本語 Nederlands Español Italiano Deutsch Français English
English ........................................... 3
Français ....................................... 13
Deutsch........................................ 23
Italiano ......................................... 33
Español ........................................ 43
Nederlands .................................. 53
日本語 ...........................................63
English Français Deutsch Italiano Español Nederlands 日本語
3
Welcome Guide •English
Tripod Mic Stand with Boom
Contents:
Before getting started, ensure the package contains the following
components:
Part Qty
Tripod mic
stand with
boom
1
Small cable
holder 1
Large cable
holder 1
日本語 Nederlands Español Italiano Deutsch Français English
4
Assembly
English Français Deutsch Italiano Español Nederlands 日本語
5
Assembly
Step 1:
Setting Up the Product
Circular knob
Tripod leg
Loosen the circular knob. Pull the legs of the tripod downward until they are fully
extended and tighten the circular knob securely.
日本語 Nederlands Español Italiano Deutsch Français English
6
Assembly
Step 2:
Setting Up the Product
Loosen the clutch. Pull up on the upper pole to extend to the desired height
and tighten the clutch securely.
Upper pole
Clutch
English Français Deutsch Italiano Español Nederlands 日本語
7
Assembly
Step 3:
Setting Up the Product
Loosen the large knob. Lift the boom upward, adjust to the desired angle,
and tighten the large knob securely.
Large knob
Boom
日本語 Nederlands Español Italiano Deutsch Français English
8
Assembly
Step 4:
Setting Up the Product
Loosen the small knob. Adjust the boom to the desired length and tighten
the small knob securely.
Small knob
English Français Deutsch Italiano Español Nederlands 日本語
9
Assembly
Step 5:
Setting Up the Product
Microphone holder
(not provided)
Microphone
(not provided,
microphone
weight ≤ 1 kg)
Cable
Attach the mic holder (not provided) on the top of the boom. Place the microphone
(not provided) in the mic holder.
If a heavy microphone is used, it is recommended to add a sandbag or weight on
the rear of boom to keep it balanced.
日本語 Nederlands Español Italiano Deutsch Français English
10
Assembly
Step 6:
Setting Up the Product
2⁄3
1⁄3
≤2⁄3 >2⁄3
NOTICE: The product
should be placed
on a flat horizontal
surface.
Line up the boom
(microphone end)
with one of the legs
for better stability.
Attach the small and large cable holders ( , ) to the pole and boom. Connect the
cable to the holders to fix in place.
Table des matières
Langues :
Autres manuels Amazon Accessoires pour appareils photo
