ALTUS MLB 2410 Manuel utilisateur

Motherboard

User Manual

MLB 2410

Aug. 2007 (Revision A)

P/N: 1230B0049401

All rights, including copyright, in the content of this manual are owned or controlled by IESC and

protected by the Taiwan and international copyright act.

No one may, transmit, adapt, assign, compile, rent, sale, change, copy, reproduce, distribute,

publish, display, broadcast, or use in any way the content of this manual, in whole or in part, for

any other purpose whatsoever without the prior written permission of IESC.

Trademarks

All product names or brands mentioned herein are the trademarks of IESC, its subsidiaries or

other respective owners in Taiwan, United States and other countries.

Disclaimer

This manual provides the information in relation to the set-up and installation of the product

herein. Nothing herein may be construed as granting any right or license relating to any

intellectual property rights of this manual or product. Unless otherwise provided in the Purchase

and Sale Agreement for this product, manufacturer and distributor of this product will not be

liable whatsoever relating to the distribution and/or use of this product. In addition, manufacturer

and distributor of this product hereby specifically disclaim any express or implied warranties of

merchantability, fitness for a particular purpose, or non-infringement of third party rights in

connection with this product.

Manufacturer of this product may have the right to change specifications and product

descriptions at any time without notice.

Contents

About This Manual ........................................................................................................................i

Conventions.................................................................................................................................i

Safety Symbols...........................................................................................................................ii

Safety Precautions..................................................................................................................... iii

Operation Safety .................................................................................................................... iii

Electrical Safety...................................................................................................................... iii

Battery Replacement Safety...................................................................................................iv

Laser Peripherals or Devices Safety.......................................................................................v

Intended Application Uses.......................................................................................................v

Site Selection ..........................................................................................................................v

Tools Required ........................................................................................................................v

Regulatory and Integration Information......................................................................................vi

Regulatory Compliance Identification Numbers......................................................................vi

Product Regulatory Compliance.............................................................................................vi

1Introduction ........................................................................................................................1-1

1.1 Audience Assumptions..................................................................................................1-1

1.2 Manual Organization.....................................................................................................1-1

1.3 Product Features...........................................................................................................1-2

1.4 Motherboard Layout......................................................................................................1-4

1.4.1 Connectors and Component Locations..................................................................1-4

1.4.2 Back Panel Connectors..........................................................................................1-6

1.5 System LED Information ...............................................................................................1-6

1.5.1 Back Panel LED Information..................................................................................1-6

1.5.2 Front Panel LED Information..................................................................................1-7

2Hardware Operations.........................................................................................................2-1

2.1 Before You Start ............................................................................................................2-1

2.2 Screw Holes..................................................................................................................2-2

2.3 System Battery..............................................................................................................2-3

2.3.1 To remove the system battery................................................................................2-4

2.3.2 To install the system battery...................................................................................2-4

2.4 Processor......................................................................................................................2-5

2.4.1 To remove the heat sink.........................................................................................2-6

2.4.2 To install the heat sink............................................................................................2-6

2.4.3 To remove the processor........................................................................................2-7

2.4.4 To install the processor ..........................................................................................2-8

2.4.5 To remove the heat sink socket..............................................................................2-9

2.4.6 To install the heat sink socket.................................................................................2-9

2.5 System Memory ..........................................................................................................2-10

2.5.1 To remove a DIMM...............................................................................................2-14

2.5.2 To install a DIMM..................................................................................................2-15

2.6 System Configuration Jumper.....................................................................................2-16

3Connectors, Jumpers and Switch.....................................................................................3-1

3.1 Power Connectors (J10, J8)..........................................................................................3-1

3.1.1 Main Power Connector (J10) .................................................................................3-1

3.1.2 Processor Power Connector (J8)...........................................................................3-2

3.2 Front Panel and IDE Connector (J28)...........................................................................3-3

3.3 Floppy Connector (J43).................................................................................................3-5

3.4 Chassis Intrusion Connector (J40)................................................................................3-6

3.5 IPMB Connector (J1).....................................................................................................3-7

3.6 Front Panel VGA Connector (J41).................................................................................3-8

3.7 D-sub VGA Port (J57)....................................................................................................3-9

3.8 Serial Port (J58) ..........................................................................................................3-10

3.9 Keyboard and Mouse Ports (J54, 53)..........................................................................3-11

3.10 Rear Dual USB Port (J52)...........................................................................................3-13

3.11 Front Panel USB Connector (J20)...............................................................................3-14

3.12 I2C (SMBus) Signal Connector for Power Supply (J21)...............................................3-15

3.13 Dual NIC Connector (RJ45) (J50, J51)........................................................................3-16

3.14 Management Port (RJ45) (J55)...................................................................................3-17

3.15 System Fan Board Connector (J9)..............................................................................3-18

3.16 Mini-SAS Connectors (J27, J24).................................................................................3-19

3.17 Internal USB Port for USB Floppy (J13)......................................................................3-21

3.18 System Configuration Jumper Setting (J38)................................................................3-22

3.19 BMC Recovery Jumper and Switch Settings (J5, SW1)..............................................3-23

3.19.1 BMC Recovery Jumper Setting on the Hitachi BMC Daughter Card (J5).............3-23

3.19.2 BMC Recovery Switch Setting on the AMI BMC Daughter Card (SW1)...............3-23

4BIOS Setup..........................................................................................................................4-1

4.1 BIOS Setup Utility..........................................................................................................4-1

4.2 Entering the BIOS Setup Utility.....................................................................................4-2

4.3 Keyboard Command Bar...............................................................................................4-3

4.4 BIOS Updates ...............................................................................................................4-5

4.4.1 BIOS Requirements...............................................................................................4-5

4.4.2 ROM Flash.............................................................................................................4-6

Appendix China RoHS Regulations ..........................................................................................I

List of Figures

Figure 1-1 Motherboard Overview .....................................................................................1-2

Figure 1-2 Connectors and Component Locations ............................................................1-4

Figure 1-3 Back Panel Connectors....................................................................................1-6

Figure 1-4 Back Panel LEDs..............................................................................................1-6

Figure 2-1 Screws Placement............................................................................................2-2

Figure 2-2 System Battery Location...................................................................................2-3

Figure 2-3 Pulling the System Battery out of the Holder....................................................2-4

Figure 2-4 Putting the System Battery into the Holder.......................................................2-4

Figure 2-5 Processor Location...........................................................................................2-5

Figure 2-6 Removing the Heat Sink...................................................................................2-6

Figure 2-7 Opening the Load Plate....................................................................................2-7

Figure 2-8 Lifting the Processor out of the Socket.............................................................2-7

Figure 2-9 Closing the Load Plate .....................................................................................2-7

Figure 2-10 Placing on the PnP Cap..................................................................................2-8

Figure 2-11 Pointing the Golden Corner toward the Socket...............................................2-8

Figure 2-12 Removing the Heat Sink Base Socket............................................................2-9

Figure 2-13 Lifting up the Heat Sink Socket.......................................................................2-9

Figure 2-14 Location of the System Memories ................................................................2-10

Figure 2-15 DIMM Socket Location .................................................................................2-11

Figure 2-16 Lifting the DIMM out of the Socket................................................................2-14

Figure 2-17 Pressing the Retaining Clips Outward..........................................................2-15

Figure 2-18 Inserting the DIMM into the Socket...............................................................2-15

Figure 2-19 System Configuration Jumper Location........................................................2-16

Figure 3-1 Main Power Connector.....................................................................................3-1

Figure 3-2 Processor Power Connector.............................................................................3-2

Figure 3-3 Front Panel and IDE Connector........................................................................3-3

Figure 3-4 Floppy Connector.............................................................................................3-5

Figure 3-5 Chassis Intrusion Connector.............................................................................3-6

Figure 3-6 IPMB Connector...............................................................................................3-7

Figure 3-7 Front Panel VGA Connector.............................................................................3-8

Figure 3-8 D-sub VGA Port................................................................................................3-9

Figure 3-9 Serial Port.......................................................................................................3-10

Figure 3-10 Keyboard Port...............................................................................................3-11

Figure 3-11 Mouse Port ...................................................................................................3-12

Figure 3-12 Rear Dual USB Port .....................................................................................3-13

Figure 3-13 Front Panel USB Connector.........................................................................3-14

Figure 3-14 I2C (SMBus) Signal Connector for Power Supply.........................................3-15

Figure 3-15 Dual NIC Connector (RJ45)..........................................................................3-16

Figure 3-16 Management Port (RJ45) .............................................................................3-17

Figure 3-17 System Fan Board Connector ......................................................................3-18

Figure 3-18 Mini-SAS Connector.....................................................................................3-19

Figure 3-19 Internal USB Port for USB Floppy ................................................................3-21

Figure 3-20 System Configuration Jumper ......................................................................3-22

Figure 3-21 BMC Recovery Jumper.................................................................................3-23

Figure 3-22 BMC Recovery Switch..................................................................................3-23

Appendix Figure I China RoHS Regulations..........................................................................I

List of Tables

Table i Product Safety Requirements...................................................................................vi

Table ii European Union EMC Requirements...................................................................... vii

Table 1-1 Manual Introduction............................................................................................1-1

Table 1-2 Product Features................................................................................................1-2

Table 1-3 Back Panel LED Information..............................................................................1-7

Table 2-1 DIMM Installation Option 1...............................................................................2-12

Table 2-2 DIMM Installation Option 2...............................................................................2-13

Table 3-1 Main Power Connector Pin Definition.................................................................3-2

Table 3-2 Processor Power Connector Pin Definition ........................................................3-2

Table 3-3 Front Panel and IDE Connector Pin Definition...................................................3-3

Table 3-4 Floppy Connector Pin Definition.........................................................................3-5

Table 3-5 Chassis Intrusion Connector Pin Definition........................................................3-6

Table 3-6 IPMB Connector Pin Definition...........................................................................3-7

Table 3-7 Front Panel VGA Connector Pin Definition.........................................................3-8

Table 3-8 D-sub VGA Port Pin Definition............................................................................3-9

Table 3-9 Serial Port Pin Definition ..................................................................................3-10

Table 3-10 Keyboard Port Pin Definition..........................................................................3-11

Table 3-11 Mouse Port Pin Definition...............................................................................3-12

Table 3-12 Rear Dual USB Port Pin Definition.................................................................3-13

Table 3-13 Front Panel USB Connector Pin Definition.....................................................3-14

Table 3-14 I2C (SMBus) Signal Connector for Power Supply Pin Definition.....................3-15

Table 3-15 Dual NIC Connector (RJ45) Pin Definition .....................................................3-16

Table 3-16 Management Port (RJ45) Pin Definition.........................................................3-17

Table 3-17 System Fan Board Connector Pin Definition..................................................3-18

Table 3-18 Mini-SAS Connector Pin Definition for J27.....................................................3-19

Table 3-19 Mini-SAS Connector Pin Definition for J24.....................................................3-20

Table 3-20 Internal USB Port for USB Floppy Pin Definition............................................3-21

Table 3-21 System Configuration Jumper Function .........................................................3-22

Table 3-22 BMC Recovery Jumper Function ...................................................................3-23

Table 4-1 BIOS Setup Utility Screen Description...............................................................4-2

Table 4-2 Keyboard Command Bar Description.................................................................4-3

Table 4-3 BIOS Requirements Description ........................................................................4-5

Conventions

Safety Symbols

Safety Precautions

Regulatory and Integration Information

About This Manual

1230B0049401 i

About This Manual

Conventions

To make sure that you perform certain tasks properly, take note of the following symbols used

throughout this manual.

Warning: Information to prevent injury to yourself when trying to complete a

task.

Caution: Information to prevent damage to the components when trying to

complete a task.

Important: Information that you must follow to complete a task.

Note: Tips and information to aid in completing a task.

About This Manual

1230B0049401 ii

Safety Symbols

Before troubleshooting, you must be familiar with the safety information listed below. In order to

avoid any potential hazards, the following symbols may be placed on some components of the

server.

The shape and the color of symbols shown below are mainly for your reference. Please take the

actual shipment as standard.

Indicates the potential hazard of energy circuits or electric shock. To reduce the

risk of injury from electric hazards, do not open this enclosure.

Warning: Any surface or area of the equipment marked with this symbol

indicates the presence of electric shock hazards. The enclosed area contains no

operator serviceable parts.

Indicates the potential hazard of electric shock. The enclosed area contains no

user of field serviceable parts. Do not open for any reason.

Warning: To reduce the risk of injury from electric shock hazards, do not open

this enclosure.

Indicates the presence of a hot surface or hot component.

Warning: To reduce the risk of injury from a hot component, allow the surface to

cool before touching it.

Any RJ45 receptacle marked with this symbol indicates a network interface

connection.

Warning: To reduce the risk of electric shock, fire, or damage to the equipment,

do not plug telephone or telecommunications connectors into this receptacle.

This symbol, on power supplies or systems, indicates that the equipment is

supplied by multiple sources of power.

Warning: To reduce the risk of injury from electric shock, remove all power cords

to completely disconnect power from the system.

Weight in kg

Weight in lb

This symbol indicates that the component exceeds the recommended weight for

one individual to handle safely.

Warning: To reduce the risk of personal injury or damage to the equipment,

observe local occupational health and safety requirements and guidelines for

manual material handling.

Table des matières

Autres manuels ALTUS Carte mère

ALTUS

ALTUS MLB 2204 H/W Manuel utilisateur

Manuels Carte mère populaires d'autres marques

DFI

DFI SD170 Manuel utilisateur

ASROCK

ASROCK ROMED8-2T Manuel utilisateur

Asus

Asus P2L97A Manuel utilisateur

Winmate

Winmate IC70 Manuel utilisateur

Asus

Asus MES-B Manuel utilisateur

Grantech

Grantech SYS8F377VGGA-3OMN Manuel utilisateur

Telit Wireless Solutions

Telit Wireless Solutions SL869-3DR Manuel utilisateur

Gigabyte

Gigabyte GA-9IVDT Manuel utilisateur

Texas Instruments

Texas Instruments ADS8372EVM Manuel utilisateur

Commell

Commell MS-C73 Manuel utilisateur

IBT Technologies

IBT Technologies MB860 Manuel utilisateur

Nvidia

Nvidia TEGRA DG-04927-001_V01 Manuel utilisateur

Biostar

Biostar M7VIT Bravo Instructions d'utilisation et d'installation

Intel

Intel D33217CK Manuel utilisateur

Asus

Asus F1A55-M LX PLUS R2.0 Manuel utilisateur

EPC

EPC EPC9147C Manuel utilisateur

Asus

Asus EX-B760M-V5 D4 Manuel utilisateur

EPOX

EPOX MU-8KHA0010 Manuel utilisateur